Electric | The Largest Consumer Energy & Renewables Platform
LS ELECTRIC Co., Ltd.
Installation Guide for SIO models including: XEL-BSSRT, XEL-BSSRF, XEL-BSSRH, XEL-BSSRT Ethernet IO Adapter, XEL-BSSRT, Ethernet IO Adapter, IO Adapter, Adapter
Nov 17, 2024 — 주의. ① 제품의 정격전압과 단자 배열을 확인한 후 정확하게 배선하여 주십시오. ② 배선 시 단자의 나사를 규정 토크로 단단하게 조여 주십시오.
File Info : application/pdf, 2 Pages, 737.96KB
DocumentDocumentC/N: 10310001663
Programmable Logic Controller
Smart I/O
XEL-BSSRT/F/H
PLC . .
1
/
. . , , , , .
. . . . , . . . . 100mm
.
2
.
No
1
055
2
-2570
3
595%RH,
4
595%RH,
-
5f<8.4
-
3.5mm
5
8.4f150
9.8(1g)
-
5f<8.4
-
1.75mm
X,Y, Z
10
8.4f150
4.9(0.5g)
-
-
IEC 61131-2
3
.
1) XG5000 Software
: V4.30
4
.
RAPIEnet, EtherNet/IP, Modbus-TCP, BOOTP, DHCP 100/1000Mbps
: Category 5e STP(Shielded Twisted-pair) : (MMF)/ (SMF) 8 3.0A1)
BSSRT: 710, BSSRF: 750, BSSRH: 730
1)
.
5 (mm)
. . .
No.
LED
PADT USB
RAPIEnet/IP , LED DC24V , XG5000 USB
USB USB
LED
LED
RUN
RMS
RNS
RELAY
LINK/ACT1 LINK/ACT2
Off RUN STOP , , , duplex 1 IP/ , , Heartbeat Error Off On
Link=No, Activity=NA
1G Link=Yes, Activity=No
1G Link=Yes, Activity=Yes
10/100M Link=Yes, Activity=No
10/100M Link=Yes, Activity=Yes
6
. 1) . . .
2) . . ( .)
7
1) 10/100/1000BASE-TX (-) 100m.
2) (Auto Crossover)
.
1
TD+
1 ----- 1
1 ----- 3
2
TD-
2 ----- 2
2 ----- 6
3
RD+
3 ----- 3
3 ----- 1
4
TRD2+
4 ----- 4
4 ----- 7
5
TRD2-
5 ----- 5
6
RD-
6 ----- 6
5 ----- 8 6 ----- 2
7
TRD3+
7 ----- 7
7 ----- 4
8
TRD3-
8 ----- 8
8 ----- 5
8
36. . , .
1) , (, , CAP, , LCD ) 2) ·· 3) 4) 5) 6) · 7) , 8) . .
LS ELECTRIC Co., Ltd. www.ls-electric.com 10310001663 V1.4 (2024.6)
!
( )
1544-2080
TEL:(02)2034-4623~38
TEL:(051)310-6855~60
TEL:(053)603-7741~8
() TEL:(062)510-1891~92
() TEL:(042)820-4240~42
FAX:(02)2034-4057 FAX:(051)310-6851 FAX:(053)603-7788 FAX:(062)526-3262 FAX:(042)820-4298
(): 4 56 ( 31226).
C/N: 10310001663
Programmable Logic Controller Installation Guide
Smart I/O
XEL-BSSRT/F/H
This installation guide provides simple function information or PLC control. Please read carefully this data sheet and manuals before using products. Especially read precautions then handle the products properly.
1 Safety Precautions
Meaning of warning and caution label
WARNING CAUTION
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices
WARNING
Do not contact the terminals while the power is applied. Be sure there are no foreign metallic matters. Do not manipulate the battery(charge, disassemble, hitting, short, soldering).
CAUTION
Be sure to check the rated voltage and terminal arrangement before wiring When wiring, tighten the screw of terminal block with the specified torque range Do not install the flammable things on surroundings Do not use the PLC in the environment of direct vibration Except expert service staff, Do not disassemble or fix or modify the product Use the PLC in an environment that meets the general specifications contained in
this installation guide. Be sure that external load does not exceed the rating of output module. When disposing of PLC and battery, treat it as industrial waste. I/O signal or communication line shall be wired at least 100mm away from a high-
voltage cable or power line.
2 Operating Environment
To install, observe the below conditions.
No
Item
Specification
Standard
1 Ambient temp.
0 ~ 55
-
2 Storage temp.
-25 ~ 70
-
3 Ambient humidity
5 ~ 95%RH, non-condensing
-
4 Storage humidity
5 ~ 95%RH, non-condensing
-
Occasional vibration
-
-
Frequency Acceleration Amplitude Number
5f<8.4
-
3.5mm
5
Vibration Resistance
8.4f150 9.8(1g)
-
Continuous vibration
Frequency Acceleration Amplitude
5f<8.4
-
1.75mm
8.4f150 4.9(0.5g)
-
10 times in each
direction for
X, Y, Z
IEC 61131-2
3 Applicable Support Software
For system configuration, the following version is necessary.
1) XG5000 Software
: V4.30 or above
4 Performance Specifications
For more information, please refer to user manual.
Item
Specification
Communication protocol
RAPIEnet, EtherNet/IP, Modbus-TCP, BOOTP, DHCP
Transmission speed
100/1000Mbps
Communication cable
Electric: S-FTP over CAT5e Optical: Multi-mode/Single-mode fiber optic cable(MMF/SMF)
Maximum expansion stages Output current
Internal current consumption
8 slot 3.0A*1) BSSRT: 710, BSSRF: 750, BSSRH: 730
*1) Be careful that the sum of the current consumption does not exceed the output current.
5 Parts name and Dimension (mm)
This is front part of the product. Refer to each name when operating the system. For more information, refer to user's manual.
\
Parts name and function
No.
Name
Status LED
Rotary Switch Power connector Media connector USB connector USB protection cover Expansion cover
Description RAPIEnet/IP Adapter operation status LED, Network communication status LED Node Address switch DC24V power input connector Media connector (electric, optical) USB connector to connect with XG5000 Protection cover for USB connector Protection cover for expansion connector
LED details
LED
Status
Off
RUN
Green On Red On
Green Blink
Green On
Green Blink
RMS
Red On
Red Blink
RNS
RELAY
LINK/ACT1 LINK/ACT2
Green On Green Blink Red On
Red Blink
Off Green On Off Green On Green Blink Yellow On Yellow Blink
Description
Power Off Master module is RUN Master module is STOP Waiting for service Normal Devices setting is not complete Non-restorable error occurs Invalid setting, Restorable error occurs, Parameter errors, Initialization errors, Different speeds or duplexes between ports At least one connection Device is not connected Duplicated IP address/station number is detected Time-out occurs with one or more devices Frame error or heartbeat error occurs Relay Off Relay On Link=No, Activity=NA 1G Link=Yes, Activity=No 1G Link=Yes, Activity=Yes 10/100M Link=Yes, Activity=No 10/100M Link=Yes, Activity=Yes
6 Installing / Removing Modules
Here describes the method to attach each module to the base or remove it. 1) Installing module When extension input/output module is installe
of adapter module up. Push the product and connect it agreement
with hook for fixation of four edges and hook
for connection After connection, get down the hook for fixation
and fix it completely
2) Removing module
Push up the hook for disconnection.
Detach the product with two hands. (Don't force it.)
7 Wiring
Wiring for Communication 1) 100/10000BASE-TX's max.extended length between nodes is 100m. 2) This module provides Auto Cross Over function so the user can use both cross and
straight cable.
Pin No.
Sign
Cable wiring Straight cable Cross cable
1
TD+
1 ----- 1
1 ----- 3
2
TD-
2 ----- 2
2 ----- 6
3
RD+
3 ----- 3
3 ----- 1
4
TRD2+
4 ----- 4
4 ----- 7
5
TRD2-
5 ----- 5
6
RD-
6 ----- 6
5 ----- 8 6 ----- 2
7
TRD3+
7 ----- 7
7 ----- 4
8
TRD3-
8 ----- 8
8 ----- 5
8 Warranty
The warranty period is 36 months from the date of manufacture. The initial diagnosis of faults should be conducted by the user. However, upon request, LS ELECTRIC or its representative(s) can undertake this task for a fee. If the cause of the fault is found to be the responsibility of LS ELECTRIC, this service will be free of charge. Exclusions from warranty
1) Replacement of consumable and life-limited parts (e.g. relays, fuses, capacitors, batteries, LCDs, etc.)
2) Failures or damages caused by improper conditions or handling outside those specified in the user manual
3) Failures caused by external factors unrelated to the product 4) Failures caused by modifications without LS ELECTRIC's consent 5) Use of the product in unintended ways 6) Failures that cannot be predicted/solved by current scientific technology at the time of manufacture 7) Failures due to external factors such as fire, abnormal voltage, or natural disasters 8) Other cases for which LS ELECTRIC is not responsible For detailed warranty information, please refer to the user's manual. The content of the installation guide is subject to change without notice for product performance improvement.
LS ELECTRIC Co., Ltd www.ls-electric.com 10310001663 V1.4 (2024.6)
· E-mail: automation@ls-electric.com
· Headquarter/Seoul Office · LS ELECTRIC Shanghai Office (China) · LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) · LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) · LS ELECTRIC Middle East FZE (Dubai, U.A.E.) · LS ELECTRIC Europe B.V. (Hoofddorf, Netherlands) · LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) · LS ELECTRIC America Inc. (Chicago, USA)
Tel: 82-2-2034-4033,4888,4703 Tel: 86-21-5237-9977 Tel: 86-510-6851-6666 Tel: 84-93-631-4099 Tel: 971-4-886-5360 Tel: 31-20-654-1424 Tel: 81-3-6268-8241 Tel: 1-800-891-2941
· Factory: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea