Sitges Corner Set Grey-Table - Argos Assembly Instructions & Care Guide

Sitges Corner Set Grey-Table

Issue 1 - 18/06/19

Safety and Care Advice

Product Details

Model: Grey 1258318

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

  • Keep children and animals away from the work area; small parts could cause choking if swallowed.
  • Ensure you have enough space to lay out the parts before starting.
  • This product has been constructed for domestic environment use only and not for commercial purposes.

Care and Maintenance

  • During assembly, do not lay the glass directly onto hard or rough surfaces. We recommend laying the glass on a blanket or cardboard during assembly. You could even use the box.
  • When lifting or moving the product, ask for someone to lend a hand; trying to move a product on your own can lead to accidents.
  • Do not place very hot or very cold items, such as saucepans or barbecues, directly on the glass surface. Extreme temperature differences over small areas can damage glass.
  • Assemble the item as close to its final position (in the same room) as possible.
  • Assemble on a soft level surface to avoid damaging the unit or your floor.
  • Do not use furniture if any parts are missing or broken. Contact your retailer immediately.
  • Do not drag rough or heavy objects over the top of the glass.
  • Do not strike the glass with hard or pointed items, or use the glass as a chopping surface.
  • We recommend using place mats, coasters, and table cloths to help protect against scratches and accidentally dropped items.
  • Clean the glass regularly to make sure there are no grit on the top.
  • Do not sit or stand upon the glass surface.
  • Do not clean glass with washing powders or any other substances containing abrasives, since these substances can scratch glass.

Additional Guidance

  • We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. ?️
  • Parts of the assembly will be easier with 2 people. ?‍?‍?
  • Dispose of all packaging carefully and responsibly. ♻️
  • For tables that can be used outdoors, if your table has a parasol, make sure the edge of the parasol cut-out has a protector in place. Always use a weighted parasol base, and remove the parasol in windy conditions. Parasols can put pressure on the table top or even blow the table over in windy weather. ☂️
  • For tables that can be used outdoors, it is advised that the table is kept covered when not in use to protect the glass from the weather and accidental damage. ?️
  • Assemble all parts and bolts loosely during assembly; only once the product is complete should you fully tighten the bolts.
  • Regularly check and ensure that all bolts and fittings are tightened properly. ✔️
  • The unit weight is approximately 11.5kgs.
  • Make sure the assembly will be easier with 2 people. ?‍?‍?

This product is compliant with BS EN581-1 and BS EN581-3.

Distributed by: Sainsbury's Supermarkets Ltd., Argos Limited, and associated companies.

Fittings

Bag 1

  • 15mm Screw x 2 (J)
  • 25mm Screw x 4 (K)
  • Washer x 6 (D)
  • Screw Cap x 6 (E)
  • Allen key x 1 (H)

Components

  • Table Leg x 2 (500 x 400 x 50mm) (12)
  • Table Frame (800 x 495 x 40mm) (13)
  • Glass (797 x 500 x 5mm) (14)

Assembly Instructions

Step 1

Attach the two Table Legs (12) to the Table Frame (13) using four 25mm Screws (K) and four Washers (D). Do not fully tighten all screws until assembly is complete, as this may cause screw holes to misalign, making assembly difficult. ⚠️

Note: During assembly, do not lay the glass directly onto hard or rough surfaces. We recommend laying the glass on a blanket or cardboard during assembly. You could even use the box.

Step 2

Attach the Table Legs (12) to the Table Frame (13) using two 15mm Screws (J) and two Washers (D). Ensure all bolts and fittings are tightened properly once assembly is complete. ✔️

Step 3

Attach the six Screw Caps (E) to cover the screw heads. ?

Step 4

Carefully place the Glass (14) onto the assembled frame. ⬇️

Note: When lifting or moving the product, ask for someone to lend a hand. Trying to move a product on your own can lead to accidents. ?️

Step 5

Assembly is completed. Your Sitges Corner Set Grey-Table is now ready for use. ✨

Models: D001 Sitges Corner Set Grey-Table, D001, Sitges Corner Set Grey-Table, Grey-Table, Sitges Corner Set, Corner Set

PDF preview unavailable. Download the PDF instead.

1258318 R D001 Adobe PDF library 16.03 Adobe Illustrator(R) 24.0

Related Documents

Preview Argos Malta 4 Seat Bar Set Assembly Instructions
Detailed assembly instructions and care guide for the Argos Malta 4 Seat Bar Set. Includes safety advice, parts list, and step-by-step assembly process.
Preview Argos Amelia Remote Control Pairing Instructions
Step-by-step guide for pairing the Argos Amelia remote control with Amelia light fittings, including troubleshooting tips.
Preview Argos GT-06 Thermoelectric Cooler & Warmer User Manual
User manual for the Argos GT-06 Thermoelectric Cooler & Warmer, detailing operating instructions, safety precautions, maintenance, and troubleshooting.
Preview 4x3M Waterproof Gazebo with 2 Side Panels Assembly Instructions
Comprehensive assembly instructions for the 4x3M Waterproof Gazebo with 2 Side Panels, including safety precautions, parts list, and step-by-step guidance for setup.
Preview Digital LCD Alarm Clock: Installation & User Instructions
Comprehensive installation and user instructions for the Argos Digital LCD Alarm Clock, covering setup, operation, safety, troubleshooting, and guarantee information.
Preview Chimney Hood Installation and User Instructions
Comprehensive guide for installing and using your chimney hood, including safety information, parts, mounting, electrical connections, user operation, maintenance, troubleshooting, technical specifications, and guarantee details.