Frunsi Rubens Tab T8 User Manual

Getting Started

Powering the Tablet On/Off

To turn on the tablet: Press and hold the 'Power' button until the screen lights up. Wait until the home screen appears, and the tablet will be ready for use.

To turn off the tablet:

1. Press and hold the 'Power' button until the confirmation message appears.
2. Touch 'Power off' to turn off the tablet.

Screen On/Off (Standby)

When the tablet is on, you can turn off the screen to save battery by pressing the 'Power' button once. Pressing the 'Power' button again will display the screen.

The screen can be set to turn off automatically after a period of inactivity (15 to 30 seconds) to save battery. This sleep option can be found in the Display menu.

Unlocking the Screen

If the screen turns off, you will need to unlock it when turning it back on. To unlock the screen, slide your finger upwards on the home screen.

If a password is set, enter the password to finish unlocking the screen. The screen lock password can be set in the Security and Location settings menu.

Warning: Please note down your password/PIN/lock pattern. If you forget or lose this password, you will be locked out. Recovering the device will reset it to factory default, erasing all data and programs.

Understanding the Tablet

Tablet Overview

The tablet features the following ports and buttons:

• 1. Power On/Off Button
• 2. Volume Down
• 3. Volume Up
• 4. Speaker ?
• 5. Type-C Charging Port ?
• 6. Micro HDMI Port
• 7. 3.5mm Headphone Jack
• 8. Microphone Terminal ?
• 9. TF Card Slot
• 10. Front Camera ?
• 11. Rear Camera ?
• 12. Reset Button (pinhole)

Touchscreen Operation

The tablet is equipped with an easy-to-use touchscreen. To activate tablet functions, lightly touch the screen with your fingertip. You can perform gestures with multiple fingers (e.g., pinch to zoom on photos).

Important: Do not apply excessive force or touch the screen with anything other than your finger to avoid damage. For optimal response, ensure your hands are clean before using the touchscreen controls.

Touch: Lightly touch an item on the screen (application icon, button, menu item, on-screen keyboard character/symbol) to activate it.

Touch and Hold: Some items on the screen perform different actions when touched and held (e.g., opening a context menu, enabling drag functionality). To touch and hold an item, touch it and keep your finger on it until the action occurs.

Drag: Drag items on the screen to change their position (e.g., application icons on the home screen). To drag an item, touch it, keep your finger on it without lifting, move your finger to the desired location, and then release.

Swipe: To swipe, touch the touchscreen with your finger and slide it up, down, left, or right.

Double-tap: Lightly tap the screen twice to zoom (requires application support for double-tap/zoom functionality). In browsers, double-tapping a part of a webpage will expand that section to fit the screen width.

Orientation Sensor

The tablet has a built-in sensor that automatically changes the screen orientation as you rotate the tablet. This sensor works most effectively when the tablet is held vertically relative to the ground (i.e., not flat on its back).

The orientation sensor can be turned on/off via the Accessibility settings menu.

Connectivity

Connecting to Wi-Fi

The notification bar displays an icon indicating the tablet's Wi-Fi status. A Wi-Fi network connection is shown with waves indicating signal strength. No icon means no Wi-Fi networks are in range, or the Wi-Fi radio is off.

1. Turn on the Wi-Fi radio if it is not already on:

1. Slide your fingertip upward from the home screen to bring up the launcher menu.
2. Touch the 'Settings' icon to enter the settings menu.
3. Touch 'Network & internet' from the settings menu to access the Wi-Fi settings.
4. To enable Wi-Fi connection, touch and slide the Wi-Fi option box to the right.

When Wi-Fi is enabled, the tablet searches for and displays a list of available nearby Wi-Fi networks. If a previously connected Wi-Fi network is found, the tablet connects automatically. If your Wi-Fi network is not listed, you can add it manually by tapping 'Add Network' in the Wi-Fi settings menu.

2. Select an available Wi-Fi network to connect to:

In the Wi-Fi settings menu, touch a network from the list. If the network is open, the tablet connects automatically. If the network is secured (indicated by a lock icon ?), you will be prompted to enter a password. Touch the wireless password box to show the on-screen keyboard, enter the password, and touch 'Connect' to confirm.

Upon successful connection, a Wi-Fi signal indicator will appear in the notification bar.

For information on adding a network not in range or with a hidden SSID, or for advanced Wi-Fi options, refer to the manual.

Connecting to the Internet

This tablet can connect to the internet via Wi-Fi data networks. It can connect to the internet through Wi-Fi data networks up to 300 feet away. However, this range is affected by the surrounding environment and the Wi-Fi router.

Requirements: Ensure your router supports 802.11n and accepts 802.11a/b/g/n/ac connections. A minimum communication speed of 64Kbps is recommended for a smoother experience.

For protected networks, you need to know the network name (SSID) and password. This information is usually found on your wireless router's management webpage or in its manual. For open networks or hotspots, connection is typically straightforward, with the tablet automatically obtaining necessary information from the router.

Bluetooth Settings

Slide your fingertip upward from the home screen to access the launcher menu. Touch the 'Settings' icon to enter the settings menu.

To enable Bluetooth pairing, touch and slide the Bluetooth option box to the right. Once Bluetooth is enabled, touch 'Pair new device' to search for and display nearby Bluetooth devices. Touch a device to pair; a window will pop up. Press 'Pair' to confirm. You can touch the icon next to the paired device name to rename it.

Features and Accessories

Browsing the Web

The Chrome application allows you to access webpages, search for information, stay updated with news, connect with friends, and enjoy videos from YouTube™. To use Chrome, the tablet must be connected to the internet. Refer to the 'Connecting to the Internet' section for instructions.

To open Chrome, touch the Chrome icon on the home screen or in the launcher. The browser interface includes:

• 1. New Tab: Creates a new browser window.
• 2. Address Bar: Displays the current page's URL. Touch to enter a new address or search.
• 3. Add Bookmark Icon: Touch to add bookmarks.
• 4. Search Bar: Touch to search with Google.
• 5. Browser Menu: Touch this icon to access the browser menu.

Connecting Headphones

Connect headphones (or earphones) to the tablet to enjoy media privately. Lower the tablet's volume before connecting headphones and then slowly raise it to a comfortable listening level.

• Headphones must have a 3.5mm (1/8 in) plug.

• Speaker output is automatically disabled when headphones are connected.

Hearing experts advise against constant use of personal stereos at high volumes, as prolonged exposure can lead to hearing loss. If you experience ringing in the ears or hearing loss, discontinue use and seek medical advice.

OTG Supported

Use a USB-C to USB OTG adapter to connect USB accessories like a mouse, keyboard, or thumb drive to the tablet. For extended typing, use the OTG adapter to connect a full-size keyboard for improved efficiency.

Connecting Storage Devices

Use the included USB full-size (Type A) adapter to connect storage devices (e.g., USB flash drives) to the tablet. This connection supports storage up to 256 GB. A microSD card can also be added for expanded storage.

Mounting Storage Drives

To mount the tablet's internal storage, touch 'Transfer files' to copy files to/from your computer. The tablet will be recognized as a removable storage drive. You can drag and drop files between your tablet and computer. Refer to your computer or operating system documentation for details on copying files.

Inserting a Memory Card

The tablet supports microSD cards. Inserting a memory card allows you to:

• Increase the tablet's memory capacity.
• Play media files (music, videos, photos) stored on the memory card.

To insert a memory card:

1. Align the memory card with the card slot. The metal contacts should face away from the LCD screen and point downwards.
2. Slide the card into the spring-loaded slot until it clicks.

Warning: Do not insert anything other than a microSD card into the card slot. If resistance is met, check the card's orientation. Do not force the card. Avoid touching the gold-colored contacts.

Removing a Memory Card

1. Eject the memory card:
1. From the home screen, slide your finger upwards to access the launcher.
2. Touch 'Settings' in the launcher, then navigate to the settings menu.
3. Touch the black triangle icon to the right of the SD card to eject it.
2. Push the SD card into the slot until it clicks and protrudes slightly.
3. Grasp the edge of the card and pull it out.

Warning: To prevent card damage, do not remove the card during data writing or reading. For example, do not remove the card while playing music files stored on it.

Resetting the Tablet

If the tablet freezes or becomes unresponsive, you can reset it. If the tablet is connected to a computer, disconnect it first. Then, use a paperclip to gently press the 'Reset hole' on the side of the tablet.

System Settings

Setting System Options

Open the system settings menu to adjust the tablet's appearance and functions. Many applications have their own settings; refer to the application developer's documentation for more information.

To open the Settings menu:

1. From the home screen, slide your finger upward to open the launcher.
2. Touch 'Settings' to open the settings menu.

Settings are categorized. Touch a category to open and adjust its items. Refer to the manual for descriptions of settings items.

Specifications

Safety and Warranty

General Safety Instructions

When using any electronic equipment, follow basic safety precautions:

WARNING: To reduce the risk of electric shock, fire, or injury:

1. Read all instructions before using the unit.
2. Use the unit only for its intended purpose as described in this manual.
3. WARNING: Do not allow children to use the unit without supervision.
4. WARNING: Do not spill liquids or foodstuffs into the unit.
5. WARNING: Service or repair operations should only be performed by trained personnel.
6. This unit is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
7. This unit is not intended to be operated by means of an external timer or separate remote control.
8. Attachments: Use only attachments recommended by the manufacturer. Other attachments may be hazardous.
9. Keep the device dry. Liquids and moisture can contain minerals that may rust electronic circuits. If the device gets wet, remove the battery without turning it on, wipe it with a dry cloth, and take it to an authorized service center.
10. Do not store the device in high or low temperatures. High temperatures can shorten the life of electronic devices and damage batteries.
11. Do not use or store the device in dusty or dirty areas, as this may damage moving parts and electronic components.
12. Never attempt to open the device other than as instructed. Unauthorized service will void your warranty. Only authorized service centers may repair this phone.
13. Do not drop, knock, or shake the device. Rough handling may break internal circuit boards and fine mechanics.
14. Do not use harsh chemicals, cleaning solvents, or strong detergents. Clean the device surface only with a soft, clean, dry cloth.
15. Do not store the device near magnetic fields or expose it to them for extended periods.
16. Never use the phone while driving. If you must use it, use a hands-free kit. Do not place the phone on the passenger seat or in an unsecured location where it may fall during a collision or sudden braking.
17. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than 12 hours, as overcharging may shorten its lifespan. Never disassemble or modify the battery. Never dispose of batteries in fire. If you notice any strange smell from the battery or if it feels overheated, stop using it immediately and contact an authorized service center.

Please read and heed all warnings and precautions in the User Manual.

Google, Android, Google Play, and other marks are trademarks of Google LLC.

Frunsi is not responsible for damage caused by power surges or lightning strikes.

Frunsi is not responsible for non-compatibility with third-party software or devices.

Specifications are subject to change without prior notice due to continuous product development.

Warranty Exclusions

The warranty will not be valid if:

• The product has not been installed, operated, or maintained according to the manufacturer's operating instructions.
• The product has been used for purposes other than its intended function.
• Damage or malfunction is caused by any of the following conditions:
• Incorrect voltage
• Accidents (including liquid or moisture damage)
• Misuse or abuse of the product
• Faulty or improper installation
• Power supply problems (including power spikes or lightning damage)
• Insect infestation
• Tampering or modification by unauthorized personnel
• Exposure to abnormally corrosive materials
• Insertion of foreign objects into the unit
• Use of accessories not pre-approved by Frunsi

Package Contents

Please check that the following items are included in the package. If any parts are missing, please contact the retailer where you purchased the product.

• Standalone Drawing Tablet
• Drawing Pen
• Drawing Glove
• Screen Protector Film (pre-applied)
• Leather Case
• USB Cable ?
• Charger
• Instruction Manual

Product Details

Foldable Charger

The included charger is foldable for convenience.

Screen Protector Film

The T8 comes with a thin, light screen protector pre-applied to guard the screen from scratches and dust.

Leather Case

The Rubens Tab T8 includes a leather case stand, providing extra protection and a better viewing angle.

Active Pen

1. The active pen stylus is designed for drawing, writing, sketching, and painting on the Rubenstab drawing tablet.
2. It requires an AAAA battery (1 included, 1 spare).
3. If the pen stops working, open the cap on the top to replace the battery.
4. Bring the pen close to the screen to activate palm rejection before placing your palm on the touchscreen.
5. The pen offers 1024 levels of pressure sensitivity.

FCC Statement

This TABLET PC has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Specific Absorption Rate (SAR) Information

TABLET PC meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit for the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: TABLET PC has also been tested against this SAR limit.

This device was tested for typical body-worn operations with the back of the TABLET PC kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the TABLET PC. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Contact Information

Dear Customer,

Should you experience any technical issue in setting up or using the drawing tablet, please feel free to contact our dedicated customer service team.

Please visit: www.Frunsi.com

For any concern, email us at service@Frunsi.com