Fillable 9kg Parasol Base
Stock number: 82011818
Dimensions: L38cm W38cm H7cm
Introduction
Thank you for purchasing the John Lewis and Partners Fillable 9kg Parasol Base. Please read the instructions and warnings carefully before proceeding to ensure safe and satisfactory operation of this product.
At John Lewis and Partners, the company is committed to making great products, with an in-house design team and buyers working together to bring great design to life. Expert Product Technologists collaborate with buyers and suppliers to assure the legality, safety, and quality of products. The company is committed to designing and developing products to the highest industry standard.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis and Partners team.
Assembly Overview
No Tools Required
Time to assemble: 5 minutes
People required to assemble: Two simplified human figures.
Important Safety Information
Warnings
- ⚠️ The product is HEAVY; it should only be assembled near point of use.
- ⚠️ Keep small parts out of reach of children.
- ⚠️ Ensure the product is fully assembled as illustrated before use.
Do
- ✔️ Check the pack and make sure you have all the parts listed.
Don't
- ❌ Do not stand on the product.
Customer Support: John Lewis 03456 049 049 Autochoice 'Furniture'
Your Fillable Base Components
The fillable base includes the following parts:
| Ref | Description | Dimensions | Qty |
|---|---|---|---|
| 1 | Fillable base | L38cm W38cm H7cm | 1 |
| 2 | Cap | - | 1 |
| 3 | Pole | - | 1 |
| 4 | Adapter | D38mm | 1 |
| 5 | Adapter | D32mm | 1 |
Internal dimensions: Stock number: 82011818
Parasol overall size: L38cm W38cm H7cm
Fixtures and fittings: None
Product Assembly
Step 1: Filling the Base
Parts, fittings and tools: 1, 2
Remove the cap (2) on the top of the base (1). Slowly fill the base with water or sand. Sand is heavier than water and is recommended.
Warnings for Filling:
- ⚠️ Remove water before freezing temperatures to prevent damage to the base.
- ⚠️ Do not stand or jump on the base.
- ⚠️ In high winds, it is recommended to take the umbrella down to avoid tipping over.
- ⚠️ When filled with water or sand, the base is heavy; avoid moving and dropping.
Step 2: Attaching the Pole
Parts, fittings, and tools: 3, 4, 5
Attach Pole (3) to Base (1).
- For 38mm poles, insert the larger adapter (4) into the base.
- For 32mm poles, insert the smaller adapter (5) into the larger adapter (4), then insert both together into the pole.
Care Guide
Care and Maintenance
This product is made from plastic and is suitable for outdoor use.
We recommend cleaning your base at the beginning and end of the season. To clean, remove all dirt using mild soap and water. Rinse thoroughly and allow to dry. Never use abrasive chemicals or cleaning agents.
Safety Instructions
- This parasol base has been designed for domestic use only.
- Parasol bases can be dangerous if incorrectly installed or assembled; this should be carried out by a competent person.
- No liability will be accepted for damage or injury caused by incorrectly installed or assembled parasol bases.
- Parasols should not be used in high winds or during inclement weather.
- This parasol base must always be filled to the top.
- Never drag a parasol when moving it; always lift it.
- Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
- Ensure that the parasol base is always on a solid and level surface at all times.
Retain these instructions for future reference.
Feedback
Your feedback is very important to us, and we would love to hear your comments on your new furniture. Please visit our website to leave a review. Thank you.
John Lewis Partnership
171 Victoria Street
London SW1E5NN
Johnlewis.com
