Contact us - InventronicsTuner4TRONIC - Inventronics
Installation Guide for OSRAM models including: Tuner4TRONIC NFC Scanner Passive Repeater, Tuner4TRONIC, NFC Scanner Passive Repeater, Scanner Passive Repeater, Passive Repeater, Repeater
Tuner4TRONIC - Inventronics
File Info : application/pdf, 4 Pages, 359.14KB
DocumentDocumentwww.inventronics-light.com/t4t NFC Scanner User guide for the passive antenna We offer an industry-proven solution consisting of an intuitive software suite and standardized plug-and-play hardware interfaces to optimize, simplify and speed up the manufacturing, installation and maintenance of indoor and outdoor LED luminaires. Step-by-step instructions Provided equipment Hardware interfaces for smartphones with NFC antenna can be used to program NFC LED drivers. In case your smartphone has a low-quality NFC antenna or does not have an NFC antenna at all, you can also use the optional passive antenna and NFC Scanner. Via Bluetooth®, these devices can be easily connected to the smartphone and then provide a reliable and stable NFC connection. Bluetooth® also offers a more comfortable way of programming LED drivers which are already built into a luminaire. Areas of application -- Wireless programming of LED drivers using the T4T Field software Tuner4TRONIC Field app features -- Wireless and mains-voltage-free programming of OSRAM outdoor NFC LED drivers -- Adjustment of luminaire light output and dimming levels -- Copy-and-paste function to transfer luminaire settings from defective to replacement LED drivers -- Support of our new-generation OT 1DIM and 4DIM outdoor LED NFC drivers Product family features -- Small and robust NFC antenna extension -- Uses Bluetooth® to provide NFC functionality to smartphones without NFC antenna -- Includes passive antenna for increased signal strength Equipment and accessories -- USB cable (Micro USB type B) -- NFC Scanner -- Passive antenna -- Velcro fasteners Passive antenna NFC Scanner | User guide for the passive antenna Step 1: Remove the protective film from the adhesive surface of the Velcro fasteners Step 2: Stick one of the provided Velcro fasteners on the marked DUAL LOCK area of the passive antenna Step 3: Stick the other one of the provided Velcro fasteners on the NFC Scanner 2 NFC Scanner | User guide for the passive antenna Step 4: Use the Velcro fasteners to attach the NFC Scanner to the passive antenna Step 5: Open the Bluetooth® function on your mobile phone and start the T4T Field app Step 6: T4T Field app programming can be started 3 Inventronics GmbH 04/23 Technical changes and errors excepted. Use our contact form www.inventronics-light.com/contact-us Service contact: Inventronics GmbH Parkring 31-33, 85748 Garching, Germany www.inventronics-light.com support@inventronicsglobal.com INVENTRONICS is a licensee of ams OSRAM. OSRAM is a trademark of ams OSRAM.