Manuals+

Why can't I get into the web management, even I press the reset button to reset WL-5460APv2 to factory default setting?

After you reset WL-5460APv2, the IP address of WL-5460APv2 should be 192.168.100.252. If you could not get into the web management, it might mean the reset procedure does not proceed successfully.

We recommend following these steps to proceed the reset procedure again:

  1. Please power on the WL-5460APv2. As WL-5460APv2 is powered, the Status LED is on. After WL-5460APv2 finished boot procedure, the Status LED turns off.
  2. Then please press the reset button; the Status LED will twinkle. Please press the reset button for over 10 seconds to reset.
  3. Please release the reset button and wait a while until the Status LED turns off. This indicates WL-5460APv2 has finished its boot procedure.
  4. Please connect your PC to LAN port 1 of WL-5460APv2 and configure the IP address of your PC in the same subnet with WL-5460APv2. For example: Set the IP address of your PC to 192.168.100.100, and the Subnet mask to 255.255.255.0.
  5. Please open the command prompt (cmd) window and input the command: arp -d. This command will clean the ARP table. Please input the command "arp -d" several times until it shows "the specified entry was not found".
  6. Then please open your browser and enter 192.168.100.252 to log in to the web management interface.

PDF preview unavailable. Download the PDF instead.

Reset procedure of WL-5460APv2 GPL Ghostscript 9.0

Related Documents

Preview AirLive WEB-10XGF8 WebSmart Switch Manual: Configuration and Management Guide
Detailed web manual for the AirLive WEB-10XGF8 WebSmart Switch. Learn about network configuration, port management, VLANs, QoS, security, and more for efficient network administration.
Preview AirLive OD-300CAM High IR Wireless-G Dual Stream IP Camera Quick Setup Guide
This quick setup guide provides essential instructions for installing and configuring the AirLive OD-300CAM High IR Wireless-G Dual Stream IP Camera. Learn about package contents, default settings, network installation, and viewing video streams for this outdoor IP camera from OvisLink Corp.
Preview AirLive Live-5F 5-Port Fast Ethernet Switch Specifications
Detailed specifications for the AirLive Live-5F, a 5-port fast Ethernet switch by OvisLink Corp. Features include Auto MDI/MDI-X, N-way auto-negotiation, and comprehensive LED indicators.
Preview AirLive Gigabit PoE+ Switches: POE-GSH822-120, POE-GSH1622-200, POE-GSH2422-300 Quick Setup Guide & Compliance
Quick setup guide and declaration of conformity for AirLive Technology Corporation's Gigabit PoE+ Switches: POE-GSH822-120 (12-port, 120W), POE-GSH1622-200 (20-port, 200W), and POE-GSH2422-300 (28-port, 300W). Includes installation steps, LED definitions, and regulatory compliance information.
Preview AirLive Live-M8G 8-Port Gigabit Ethernet Switch | Plug & Play, Green Power
Explore the AirLive Live-M8G, an 8-port Gigabit Ethernet switch designed for simplicity and performance. Features Plug & Play, Green Power, Loop Detection, and auto-MDI/MDI-X. Ideal for small business and home networks.
Preview AirLive WHA-5500CPE 108Mbps 802.11a Outdoor CPE Quick Setup Guide
This quick setup guide provides essential instructions for the installation and configuration of the AirLive WHA-5500CPE 108Mbps 802.11a Outdoor Customer Premises Equipment, including hardware setup, AP mode, client mode, and WDS bridge mode configurations.
Preview AirLive IGM-642BT-1.25G: L2+ Industrial Managed Gigabit PoE++ Switch
Explore the AirLive IGM-642BT-1.25G, a robust L2+ industrial managed Gigabit PoE++ switch featuring 4x 90W PoE ports, 2x 1.25G SFP slots, wide temperature operation (-40°C to 85°C), IP40 rating, and advanced management features for demanding environments.
Preview AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
This user manual provides detailed instructions and configuration guidance for AirLive 2.5GE XPON ONU and XPON ONU-1GE devices, covering installation, setup, network features, and troubleshooting for reliable broadband connectivity.