HDMX G01TX Wireless Gaming Headset

Introduction

This document provides instructions for the HDMX G01TX wireless gaming headset, covering setup, usage, and specifications. The headset is designed for gaming on PC and PlayStation 5.

Headphone Specifications

Product Overview and Components

The headset features adjustable volume control and a detachable microphone. Key components include:

• Headphones
• Volume Adjustment Button [volume-control]
• Microphone Plug Hole [mic-port]
• USB Plug Hole [usb-port]
• Removable Microphone [microphone]
• Wireless Receiver [usb-dongle]
• USB Charging Cable [usb-cable]
• Audio Cable [audio-cable]
• Microphone Mute Button [mute-button]

Headphone Charging

It is recommended to charge the battery fully before first use. Connect the headset to a power source using the provided USB charging cable. When the charging cable is connected, the red LED light on the earcup will illuminate, indicating charging. The LED turns off when charging is complete.

Charging Indicator:

• Red LED ON: Charging
• LED OFF: Charging Complete

Normal charging time is approximately 2 hours. The blue LED indicator light on the earcup turns on when the headset is fully charged.

Power On/Off

Power On: Press and hold the [power button] for 2 seconds to turn on the headset. You will hear a power-on tone, and the blue status light will flash.

Power Off: Press and hold the [power button] for 2 seconds to turn off the headset. You will hear a power-off tone, and the blue status light will turn off.

Headset Pairing

The headset and USB wireless adapter are pre-paired and ready for use at the factory. If the headset loses pairing, you can manually re-pair it by following these steps. It is recommended to contact technical support before re-pairing to determine if it is necessary.

1. Turn off the headset.
2. Unplug the USB wireless transmitter and reinsert it into the [USB port].
3. Reopen the headset according to the boot mode.
4. The blue LED is on, indicating a successful connection.

Headphone Connection (Wired)

The headset can be used as a wired headset with the included audio cable. To use the headset in wired mode, connect the audio cable to the [audio jack] on the headset and insert the other end into the audio device's [audio jack].

Headphone Connection (PC)

Wireless Connection to PC

Steps:

1. Plug the wireless transmitter into a [USB port] on your PC. The status light of the wireless receiver will flash, indicating it is waiting for connection.
2. Press and hold the [power button] on the headset for 2 seconds to turn on the power.
3. When the status light of the wireless transmitter and the blue light on the earcup are constantly on, the headset has been successfully connected.
4. Note: If this is your first time using this headset, you will need to set the headset as the default input and output device in your system's audio settings.

PC Audio Settings

Steps:

1. Right-click the speaker icon on the taskbar and select "Play devices".
2. Right-click on the headset's audio device (e.g., "G01TX Wireless Device") and select "Set as Default Device".
3. Right-click on the headset's audio device again and select "Set as Default Communication Device".
4. Navigate to the "Recording" tab. Right-click on the headset's microphone (e.g., "G01TX Wireless Device") and select "Set as Default Device".

Headphone Connection (PS5)

Wireless Connection to PS5

Steps:

1. Connect the headset wirelessly to your PlayStation 5.
2. Open your PS5 console's settings menu.
3. Connect the wireless adapter to a [USB port] on the PS5. The wireless adapter's status light will flash to indicate it is waiting for connection.
4. Hold the [power button] on the headset for 2 seconds to turn it on.
5. When the wireless adapter's status indicator and the earcup LED are always on, the headset is connected.

PS5 Audio Configuration

After detecting the G01 Wireless Headset device, configure the PS5 audio device as follows:

1. Navigate to the Settings menu and select it.
2. Highlight the "Device" menu option and select it.
3. Scroll down to "Audio Devices" and select it.
4. Set the "Input Device" to "G01TX Wireless Headset".
5. Set the "Output Device" to "G01TX Wireless Headset".
6. Select "Output to Headphones" and choose "All Audio".

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.