Control iD iDUHF Lite: Access Controller with UHF Reader
Product Overview
The Control iD iDUHF Lite is an access controller equipped with an integrated UHF reader, designed for monitoring and controlling vehicle access in corporate and residential condominiums. It features IP65 protection, ensuring durability against dust and water. The device boasts a reduced size and a UHF reader with a range of up to 12 meters. Operating as an independent unit, the iDUHF Lite handles both the reading and authentication of vehicle tags, and can control external motor drive boards. Its substantial storage capacity supports up to 200,000 users. Configuration, customization of access rules, and generation of specific reports are managed through an intuitive, embedded web software.
Key Features:
- ✔️ Reading and authentication of tags on the device
- ✔️ Access rules and customizable reports
- ✔️ Stores up to 200,000 users
- ✔️ IP65 rated for dust and water resistance
- ✔️ Seamlessly integrates with most garage door and gate controllers
- ✔️ Supports TCP/IP, Wiegand, and OSDP connectivity
- ✔️ Embedded software
Technical Specifications
Access Control
| Parameter | Details |
|---|---|
| Number of Users | More than 200,000 registered users |
| Access Rules | Configurable according to schedules and departments |
| Access Records | Capacity for over 200,000 records |
Communication
| Interface | Details |
|---|---|
| Ethernet | 1 native 10/100Mbps Ethernet port |
| RS-485 | 1 native RS-485 port with 120 Ohm termination |
| RS-232 | 1 native RS-232 port |
| Output Relay | 1 relay up to 30VAC / 5A |
| Wiegand Output | 1 native output |
| Additional Inputs | Trigger and Door Sensor Inputs |
Identification Methods
| Method | Details |
|---|---|
| UHF Reader | Reading distance up to 12m, depending on the tag used and the antenna installation conditions. |
User Interface
| Interface | Details |
|---|---|
| Integrated Web Software | Complete access control management accessible via a web browser. |
General Characteristics
| Characteristic | Details |
|---|---|
| General Dimensions | Antenna: 275 mm x 275 mm x 70 mm (W x H x D) External Drive Module: 52 mm x 52 mm x 22 mm (W x H x D) |
| Equipment Weight | Antenna: 1280g External Access Control Module: 35g |
| Power Input | External 12V power supply (not included) |
| Total Consumption | 3.5W (300mA) rated |
| Horizontal Capture Angle | 30 degrees for each side |
| Operating Temperature | -20°C to 45°C |
Interconnection Diagrams
iDUHF Lite as Access Controller
Diagram showing the iDUHF Lite connected to various components. A 12V Power Supply and RS-485 are connected to the iDUHF Lite. The iDUHF Lite also connects to a Presence sensor or inductive loop, a Door sensor, an Engine drive board, and a REX Button.
iDUHF Lite as UHF Reader (Wiegand)
Diagram illustrating the iDUHF Lite configured as a UHF Reader using Wiegand protocol. A 12V Power Supply and a Presence sensor or inductive loop are connected to the iDUHF Lite. The Wiegand output is shown, indicating a 'System installed' configuration.
