V-C Smart Watch - Quick Guide to Use

Getting Started

Watch charging and activation: Before first use, the watch needs to be charged and activated. Use the provided magnetic charger to attach to the metal contacts on the back of the watch. The other end of the charger can be plugged into a USB charging head or a computer USB port. (Please use a 5V 1A or lower charger to charge the device).

Downloading the APP: Scan the QR code provided to download and install the companion app.

Setting up your profile: Open the app and set up your profile. Navigate to "Device" and click "Add Device". Click on your device in the list of scanned devices to complete the binding.

Connecting the Watch

1. Make sure the Wireless of your cell phone is turned on.
2. Show the "MAC" address of your watch in "Settings" - "About".
3. When the watch is linked to the APP for the first time, wait for a pop-up message to allow the watch to use Wireless permission. If you have accidentally restored the factory settings of the watch, please repeat the above operation to connect the watch.
4. If the watch is turned on for more than 120 seconds without connecting to the APP, the watch will automatically turn off the Wireless. If you want to connect the APP at this time, you need to turn on the Wireless ON/OFF in the "Settings"_"Watch" of the watch, and then do the above operation.

Watch Features

• Wireless Call: Open the APP to link the Wireless of the watch, and after synchronizing the phone, you can make, answer or reject calls on the watch.
• Message Notification: To push all messages and social media notifications, you must turn on the notification authorization on your phone.
• Sports Mode: Enter the exercise mode (running, jumping rope, cycling, climbing) selection interface and start data monitoring.
• Exercise Record: Records all exercise data.
• Pedometer: Counts your pedometer data of the day, clears the data at 00:00 AM, and can be viewed in the APP.
• Sleep Monitor: Enable Sleep Monitor to monitor the quality of your sleep while you are sleeping.
• Always on Display: After setting, the watch screen will display the time after it turns off.
• Watch Face Style: UL style can be set to change.
• About: Displays the MAC address, Wireless name, and version number of the device.
• Brightness: You can set the brightness level and backlight off time.
• Settings: You can set the vibration on or off and adjust the volume.
• Language: After connecting to the APP, you can set the language on the APP or the watch side, and the language will be synchronized.
• Music Players: After connecting the device, you can remote control the music player on your phone.
• Remote Shutter: After the watch is connected to the phone, open the shutter mode of the "APP" interface, click or shake the watch to take pictures, and the pictures will be automatically stored in the phone.
• Find Mobile Phone: When the watch and mobile phone are connected, tap the watch to find the mobile phone. Long press the magnifying glass icon ?, and the mobile phone will ring.
• Weather: Shows current and upcoming weather information. Weather info is synced after connecting with the APP and will not be updated after a long disconnection.
• Stop Watch: Tap the start button ▶️ on the stopwatch page to start timing, and tap the stop button ⏹️ to stop timing.
• Alarm: Alarms can be set in the APP or the watch, up to 8 alarms can be set. The watch will display an alarm icon ⏰ and vibrate at the set time.
• Sedentary Reminder: Set the sedentary time. When the time comes, the bracelet will vibrate to remind you, and the interface has a reminder label display.

Troubleshooting

Why the watch can't receive push notifications?

1. Make sure the message push on/off is turned on in your mobile phone.
2. Make sure the message can be displayed in the notification bar of your phone. The device information depends on whether the information can be read in the notification bar of the phone. If there are no notifications on the phone, the device will not be able to receive push messages. (You need to find the notification settings in your phone to turn on/off the multimedia message alerts).
3. Turn on the accessibility settings of your device. (You will need to find the accessibility settings in your phone settings and turn on the accessibility settings for your device).

Why can't wear a watch in a hot bath? The temperature of the bath water is relatively high, and a lot of water vapor will be generated. The water vapor is in the gas phase, and its molecular radius is small. It's easy to penetrate through the gap of the device case. When the temperature drops, it will condense into liquid water droplets again, which will easily cause a short circuit internally and damage the circuit board, and then damage the whole device.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.