User Guide for COMMSCOPE models including: FGS-HNTR-3-8 iberGuide New Threaded Rod Bracket Kit, FGS-HNTR-3-8, iberGuide New Threaded Rod Bracket Kit, New Threaded Rod Bracket Kit, Threaded Rod Bracket Kit, Rod Bracket Kit, Bracket Kit
FGS-HNTR-3/8 | CommScope
1 2 3 4 A THREADED ROD REF HEX NUT (3/8", 1/2", OR 5/8") B 3 C WASHER (3/8", 1/2", OR 5/8") D E HEX NUT (3/8", 1/2", OR 5/8") 3 WASHER (3/8", 1/2", OR 5/8") F NOTES: 1 ITEMS INCLUDED WITH KIT ARE LISTED IN TABLE. 2 BRACKET CLIP USED WITH EXISTING APPLICATIONS ONLY. G 3 LOCK WASHER USED WITH NEW APPLICATIONS ONLY. 4. NOT ALL CONFIGURATIONS SHOWN AND/OR LISTED. 5. QUICK KNOB INSTALLATION INSTRUCTIONS: INSERT QUICK KNOB THROUGH BRACKET, ROTATE 90 $ , AND INTO T-SLOT IN FGS STRAIGHT SECTION. ROTATE CLOCKWISE SUCH THAT THE FLANGES EXTEND INTO T-SLOT. SEE DETAIL A. H 6. SEE DETAIL B FOR JUNCTION MOUNTING OPTION. USE 1/4 INCH SCREWS INCLUDED WITH KIT. 1 2 3 4 SAP-ENTERPRISE-A2-2016-3RD.FRM 5 6 7 FIBERGUIDE REF 8 9 10 REVISIONS REV CMO DATE APPROVED D 20276884 30-NOV-2009 CH C 40165508CMO 25-JUL-2023 IDM A B HEX NUT (3/8", 1/2", OR 5/8") WASHER (3/8", 1/2", OR 5/8") C BRACKET CLIP 2 THREADED ROD BRACKET STRAIGHT SECTION FIBERGUIDE REF WASHER (3/8", 1/2", OR 5/8") 3 FGS-HNTR-5/8-S 5/8"(NEW) SHORT D 3 FGS-HNTR-5/8-A 2 FGS-HETR-5/8-A 5/8" (NEW) SPECIAL BRACKET 5/8" (EXISTING) SPECIAL BRACKET 2 FGS-HETR-14MM 14MM (EXISTING) 2 FGS-HETR-16MM 16MM (EXISTING) 3 FGS-HNTR-16MM 16 MM (NEW) T-SLOT BRACKET HEX NUT (3/8", 1/2", OR 5/8") THREADED ROD REF 3 FGS-HNTR-14MM 14MM (NEW) E 2 FGS-HETR-12MM 12mm (EXISTING) 3 FGS-HNTR-12MM 12mm (NEW) 2 FGS-HETR-3/8 3/8" (EXISTING) 3 FGS-HNTR-3/8 3/8" (NEW) 2 FGS-HETR-5/8 5/8" (EXISTING) 3 FGS-HNTR-5/8 5/8" (NEW) 2 FGS-HETR-1/2 1/2" (EXISTING) F 3 FGS-HNTR-1/2 1/2" (NEW) QUICK KNOB ASSY CATALOG NUMBER ROD DIAMETER COMMSCOPE, INC. TOLERANCES .XX: # N/A SAP MATERIAL MASTER .XXX: # N/A 1 ANGULAR: # N/A PARTS LIST FINISH MATERIAL G DESCRIPTION THREADED ROD BRACKET 2 BRACKET CLIP HEX NUT (3/8",1/2", OR 5/8") 3 SPLIT LOCK WASHER (3/8",1/2",5/8") SCREW, THD FORM 1/4-20 QUICK KNOB ASSEMBLY © 2023 CommScope, Inc. Confidential NOTICE: These drawings and specifications are the proprietary property of COMMSCOPE, INC. and may be used only for the specific purpose authorized in writing by COMMSCOPE, INC. 5 6 QTY 1 1 2 2 2 2 7 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES DRAFTER CRAIG ZELASKO CHECKER RUBEN ARVILLA TITLE FGS THREADED ROD MTG KIT (INSTAL DWG) ENGINEER SIZE SCALE DOCUMENT NO. DEREK DERKS A2 1.000 1174894_ADC H CMO 40165508CMO ALL SURFACES AUTH GRP: ISPF MODEL DRAWING SHEET VERSION STATUS REVISION VERSION STATUS REVISION 1 OF 2 01 01 RE C 8 9 10 1 2 3 4 5 6 7 8 9 10 A A THREADED ROD REF HEX NUT (3/8", 1/2", OR 5/8") THREADED ROD REF B B HEX NUT (3/8", 1/2", OR 5/8") 3 C WASHER C (3/8", 1/2", OR 5/8") WASHER (3/8", 1/2", OR 5/8") BRACKET CLIP D 2 D 3 WASHER (3/8", 1/2", OR 5/8") E E WASHER (3/8", 1/2", OR 5/8") HEX NUT (3/8", 1/2", OR 5/8") F F HEX NUT (3/8", 1/2", OR 5/8") G MOUNTING BRACKET REF DETAIL FOR H JUNCTIONINSTALLATION (ALTERNATE MOUNTING BRACKET POSITION SHOWN) 1 2 3 SAP-ENTERPRISE-A2-2016-3RD.FRM BRACKET MOUNTING HOLES MOUNTING SCREWS (SUPPLIED WITH BRACKET) 4 5 6 © 2023 CommScope, Inc. Confidential NOTICE: These drawings and specifications are the proprietary property of COMMSCOPE, INC. and may be used only for the specific purpose authorized in writing by COMMSCOPE, INC. 7 8 G COMMSCOPE, INC. TITLE FGS THREADED ROD MTG KIT (INSTAL DWG) SIZE SCALE DOCUMENT NO. A2 1.000 1174894_ADC H DRAWING SHEET VERSION STATUS REVISION 2 OF 2 01 RE C 9 10CIDEON PdfEditor (x64) V 3.7.208.0