Smart Watch Instructions

Welcome to your new Smart Watch. This guide will help you get started.

APP Download and Installation

Install the APP - get ready for Bluetooth pairing.

Use your mobile phone to scan the QR code below, download and install the APP FitCloudPro into the smart watch. You can also directly go to Apple App Store from your iPhone or Google Play Store from your Android phone, search for "GloryFit" to download and install.

Note: make sure your mobile phone system is iOS 8.0 / Android 4.4 or higher.

Preparation for Use

Make sure the battery is sufficient before use.

The watch will automatically adsorb the magnetic charging cable to the charging pins.

Power ON / OFF

Power on: Long press the Home button to turn on the device when it is powered off (no response after pressing the button).

Power off: Long press the home button for 5 seconds to enter the shutdown interface, tap ✔️ to confirm.

Diagram: A watch face showing 'ON' with a home button indicated, and 'OFF' with a power symbol and a cross symbol.

Bluetooth Pairing

After the successful binding of the watch, the watch will automatically connect with the phone every time when the APP is active.

Open the mobile client to set up personal information.
Switch to the "Device" page and click on the binding device.
Click on your device in the list of scanned devices.
Binding completed.

Diagram: A watch with labels for Touch display, Home button, Wrist strap, Heart rate sensor, and Charging contact.

Functions

Main interface/dial

Press and hold the touch screen on the main interface to enter. Slide left and right to switch and click OK. The dial has 3 styles.

Visual Description: Three circular watch face examples are shown.

Step/distance/calorie

View the number of steps taken at any time of the day, walking distance and calories burned. Can be synchronized to the app in time to view the sports data.

Visual Description: Multiple small circular images showing step count, distance, and calorie data.

Heartrate interface

Switch to the heart rate test interface to enter the heart rate real-time monitoring. Measurement data can be synchronized to the APP in time. And have a test report.

Visual Description: A circular image showing heart rate data with BPM.

Blood pressure interface

Switch to the blood pressure interface to enter the blood pressure real-time monitoring. Measurement data can be synchronized to the APP in time, and measured Test report.

Note: Test results are for reference only and cannot be used as medical data.

Visual Description: A circular image showing blood pressure data with mmHg.

Blood oxygen interface

Switch to the blood oxygen test interface to enter the real-time detection of blood oxygen. Test results are displayed directly on the bracelet interface.

Visual Description: A circular image showing blood oxygen saturation (SpO2).

Weather interface

The weather interface will display the current weather. Weather information needs to be connected to the app. Can get data, if disconnected for a long time, weather information will not be updated.

Visual Description: A circular image showing weather information with temperature and precipitation.

Stopwatch

Click the stopwatch icon to enter the stopwatch function. Swipe right to exit.

Visual Description: A circular image showing a stopwatch with elapsed time.

Message interface

On the main interface, slide into the message interface and click the message icon to view the message. Click to turn the page, view the message to exit or right to exit.

Visual Description: A circular image showing a message notification.

Sports interface

Press the button on the main interface to enter the motion interface, right slide back to the main interface. Click on the motion map. The target can enter the motion mode detection. Running, cycling, swimming, skipping, table tennis, badminton, tennis.

Visual Description: Multiple circular images showing different sports modes like Running, Cycling, and Paused.

Sleep interface

Sleep duration, light and deep sleep duration throughout the day. It can be synchronized to the APP to analyze the sleep quality.

Visual Description: A circular image showing sleep cycle data with moon and stars.

Setting function interface

In the main interface, slide down to enter the setting function interface, you can choose "Find phone", "Brightness adjustment", "About", "Settings" Item. Click the icon to enter the corresponding function settings.

Icons: Brightness, About, Shut down, Reset.

Other feature reminders

The reminder function needs to set the open reminder switch on the APP side, and keep the mobile phone and the bracelet in the Bluetooth connection. In the successful state, the message is a vibration reminder.

Product Parameters

Screen: 1.09inch TFT
Waterproof Grade: IP67
Display Resolution: 240*240
Battery: 180mAh
Included in the Package: Smart Watch *1, Charging Cable *1, Instruction Manual *1

Precautions

It is forbidden to use an adapter with a charging voltage greater than 5V and a charging current greater than 2A. The charging time is 2-3 hours.
Do not charge in case of water stains.
This product is an electronic product, not for medical reference, measurement data is for reference only.
Blood pressure test method: Quiet rest for more than 5 minutes before the test, do not enter 2 hours before the test Food, smoking, taking medicine and drinking caffeine; testing process Take a comfortable, restful sitting position and keep it flat. A steady state of mind is forbidden to speak. Please the bracelet is at the same height as the heart (as shown on the right). Measurement data is for reference only.

Common problem

Why is the blood pressure test not allowed? The blood pressure test is affected by the external environment and the skin color of the individual. Blood pressure monitoring is only used to monitor changes in blood pressure. Can not really test or monitor the blood pressure of patients with hypertension, can not be used as a medical device, test data can not be used as Medical data, for reference only.
Why can't I push caller information or content?
1. Android QQ WeChat reminder service permission to obtain: When the user opens the QQ WeChat reminder switch for the first time, the app will get the corresponding permission and check the APP. Program to get the corresponding permissions.
2. IOS (incoming call, SMS, QQ, WeChat) reminder switch, the system will automatically pop up the pairing request, users only need to choose to pair.

	Watch M9 Smartwatch Specifications and Features Detailed specifications for the Watch M9 smartwatch, including its main selling points, product features, platform, GPS, design, compliance, dimensions, weight, materials, charging, eco-friendliness, display, touch screen, health monitoring features, Bluetooth capabilities, battery, vibration, and supported languages.
	WATCH GT4 mini (AMOLED) Smartwatch Specifications Detailed specifications for the WATCH GT4 mini (AMOLED) smartwatch, featuring Micro OS 10, offline voice control, AI watch face creation, GPS, Bluetooth calling, IP68 water resistance, and comprehensive health tracking.
	How to Set Time and Date on a Two and Three-Hand Watch A comprehensive guide on how to set the time and date on two and three-hand watches, covering preparation, time setting, date setting, and common troubleshooting tips.
	How to Set Time and Date on a Two-Hand Watch A comprehensive guide detailing how to set the time and date on a two-hand watch. Covers initial setup, time adjustment, date setting, and troubleshooting common issues like slow or inaccurate date changes.
	Watch Case Size Guide: Round Cases A comprehensive guide to help you find the perfect watch case size for your wrist, featuring round case dimensions from 36mm to 50mm.