Klewe Sundress Solar Garden Light

Assembly Instructions

1. Prepare the components for assembly.
2. Assemble the light pole sections.
3. Connect the light head to the pole.
4. Secure the light head.
5. Insert the pole into the ground.
6. Attach the light head to the pole.
7. Ensure a secure connection by tapping three times.
8. Final assembly of the light pole.

Diagram showing the step-by-step assembly of the Sundress light, including connecting pole sections and attaching the light head.

Installation Guidance

Ensure the solar panel is placed in an area that receives direct sunlight throughout the day. Avoid shaded areas from buildings or trees.

Operation and Light Modes

The light operates automatically when ambient light levels drop below 50 LUX.

Light Output Durations:

• 1 hour: 30% brightness
• 2-4 hours: 100% brightness
• 5 hours onwards: 20% brightness
• With battery indicator at 25%: 20% brightness

Diagram illustrating different light output durations and corresponding brightness levels, indicated by battery charge icons.

Battery Status Indicator:

• 100% to 75% charge
• 75% to 50% charge
• 50% to 25% charge
• 25% to 10% charge
• 10% to 2% charge
• Less than 2% charge
• 0% charge

Visual representation of battery charge levels using LED indicators, from full to empty.

Battery Replacement

The expected lifespan of the battery is approximately 3 years.

1. Access the battery compartment.
2. Remove the old battery (Li-ion 18650).
3. Insert the new battery.
4. Secure the battery compartment.

Diagram showing the process of replacing the Li-ion 18650 battery, including accessing the compartment and inserting a new battery.

Technical Specifications

• IP Rating: IP65
• Operating Time: 8-10 hours
• Charging Time: 29-31 hours
• Wattage: 4.4W
• Battery: 8800 mAh Li-ion
• Light Source: 7.5W, 7V LED
• Color Temperature: 3000K
• Color Rendering Index (CRI): >80

Support

For inquiries, please contact Klewe Solar via email at info@klewesolar.eu.