User Manual for BOULT AUDIO models including: X1-AIR, Bluetooth Wireless in Ear Earphones, Wireless in Ear Earphones, Bluetooth Ear Earphones, Ear Earphones, Earphones
ProBass-X1-AIR - Buy Boult Audio ProBass-X1 AIR Bluetooth Headphone With Mic Online
Boult X1 Air | Neckband with Comfort Fit & Voice Assistant
X1-AIR USER MANUAL Product Introduction Earbud Volume+ Nextsong Indicator light VolumePrevious song MFB USB charge Indicator light Pairing Steps Press and hold 5s NOTE: The headset will power off automatically 3 minutes without connection. Under power-off status, press and hold the MFB until the indicator light flashes red and blue alternatively, then the Headset enters the pairing mode; Be found equipment *** Turn on Bluetooth on your mobile, nd the Model No. of the Headset, and connect. Turn off Bluetooth of the rst mobile, and repeat the step above to connect with the second mobile. Features Power on\off Press and hold 2s Press and hold 5s Power on Power off Power on - Press and hold the multi-function button (MFB) for 2s until the BLUE light flashes. Power off - Press and hold the MFB for 5s till the RED light on for 2s. Call answer Call answer - Answer by your phone or press the MFB. Call End Press Call end - End by your phone or press the MFB; Call Reject Press Call reject - Reject by your phone or press and hold the MFB for 2s . Last Number Redial Last number redial - Quickly tap the MFB twice to redial the last dialed phone number. Play Music Play music - Press the MFB to play/pause music under music playing status; Track Control Press and hold 2s Press and hold 2s Track control - Press and hold the "Volume +" button for 2s to skip to the next song; Press and hold the "Volume -" button for 2s to play the previous song; Volume Adjust Press Press Volume adjust - Press the "Volume +" or "Volume -" button to increase or decrease the volume. Warning Y Use and keep the Headset under ambient temperatures; Don't throw it in case product damage caused. Y Don't disassemble, repair or alter the Headset. Y Don't clean the Headset with chemical solvent. Y Use a USB charger of DC5V to charge the Headset if necessary. Y Don't discard the Headset at random, or put it into fire or high temperature environment (60/140) in case of danger.CorelDRAW 2018 iLovePDF