Skullcandy

Download the Skullcandy App

Download the Skullcandy App to manage your earbuds. Available on the App Store and Google Play.

[QR Code]

Auto Power - On/Off

Power On (Both Earbuds)

Press and hold the touch sensor on both earbuds for 1 second.

[Image showing two earbuds with a 1-second timer icon and '00:01' text.]

Power - Off (Both Earbuds)

Press and hold the touch sensor on both earbuds for 2 seconds.

[Image showing two earbuds with a 2-second timer icon and '00:01' text.]

Pairing Mode

Either Earbud

Enter 'On Mode' by tapping the touch sensor once.

[Image showing a single earbud with a 1-second timer icon and '00:01' text.]

Pair New Device

"Mod"

LED flashes Red/Blue.

[Image showing two earbuds with LED indicators flashing red and blue.]

Connect to your new device.

Play / Pause Answer / End

Either Earbud

While On: Tap the touch sensor once.

[Image showing a single earbud with a single tap icon and '1x' indicator.]

Play/Pause music, Answer/End calls.

Volume Up

Right Earbud

Double tap the touch sensor.

[Image showing a single earbud with a double tap icon and '2x' indicator.]

Volume Down

Left Earbud

Double tap the touch sensor.

[Image showing a single earbud with a double tap icon and '2x' indicator.]

Track Forward

Right Earbud

Press and hold the touch sensor for 2 seconds.

[Image showing a single earbud with a press-and-hold icon and '00:01' text.]

Track Back

Left Earbud

Press and hold the touch sensor for 2 seconds.

[Image showing a single earbud with a press-and-hold icon and '00:01' text.]

EQ Switch

"In App Only"

"Skullcandy App Required"

Change equalizer modes via the Skullcandy App.

Find With Tile™

Both Earbuds

"Tile App Required"

Tap the touch sensor once to locate earbuds using the Tile app.

[Image showing a single earbud with a single tap icon and '1x' indicator, next to the Tile logo.]

Re-Sync Earbuds

Both Earbuds

"On Mode"

"Bluetooth Disconnected"

Triple tap the touch sensor on both earbuds.

[Image showing two earbuds with a triple tap icon and '3x' indicator.]

Clear Paired Device

Both Earbuds

"On Mode"

"Bluetooth Disconnected"

Press and hold the touch sensor on both earbuds for 3 seconds.

[Image showing two earbuds with a press-and-hold icon and '00:03' text.]

Charge Earbuds

Earbud LED

Red - Charging

Blue - Fully Charged

[Image showing two earbuds inside a charging case, with LED indicators.]

Charge the Case

Connect the case to a power source using a USB-C cable.

[Image showing a USB-C cable plugged into the charging case.]

Compliance Information

Contains Li-ion battery. Battery must be recycled or disposed of properly.

Hardware and Software Versions:

• 1. Hardware Version: Earphone: V0.2, Charging case: V0.4
• 2. Firmware Version: Earphone: V0.121, Charging case: V.012

Model Information:

• Model: S2FYW
• FCC ID: Y22-S2FYW
• IC: 10486A-S2FYW

FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.

SAR Compliance Statement: This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the FCC and ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

Caution: Risk of explosion if the battery is replaced by an incorrect type; disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

EU Declaration of Conformity: Skullcandy Internation GmbH declares that the radio equipment type [Model: S2FYW] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: skullcandy.eu/product-documents

1 Year Global Warranty

Skullcandy products are backed by a 1-year warranty. If it doesn't work the way we promised, we'll make it right. For claims, questions, or Terms & Conditions: U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL. All other countries: visit Skullcandy.com/support/international-support.

Environmental and Recycling Information: Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed out wheeled bin symbol) in your bin. Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return to purchase location for recycling or disposal.

[Crossed-out Bin Symbol]

[Chemical symbols for Mercury (Hg), Cadmium (Cd), Lead (Pb)]

Limited Warranty - For Sales in Australia: Against defects for 1 year from the date of purchase. Product will be replaced or refunded at our option. At your cost, deliver product and Proof of Purchase to Skullcandy at 63 Centennial Circuit Byron Bay, 2481 NSW, Australia. Ph 02 6639 5555. Further details at www.skullcandy.com.au or contact sales@skullcandy.com.au. Your benefits under this Skullcandy warranty are in addition to your other rights and remedies under a law in relation to this product. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Warning: To avoid hearing damage, do not listen at high volume levels.