A2 Wireless Remote Anti-Theft Alarm

Product Overview

The AMUSI A2 is a wireless remote anti-theft alarm designed to provide security for bicycles, motorcycles, and other valuable items. It features a high-decibel siren, vibration sensitivity, and waterproof design.

Key Features:

• 115dB High-Decibel Siren ?
• Vibration Sensitivity ?️
• Waterproof Design ?
• Wireless Remote Control ?
• Adjustable Sensitivity Levels ⚙️
• Low Battery Indicator ?

Package Contents

Please check the package contents upon receipt:

• 1 x Bike Alarm
• 1 x Remote Control
• 1 x User Manual
• 2 x Mounting Brackets
• 4 x Screws
• 1 x Cable Tie

Installation

Method 1: Using Mounting Brackets

1. Select a suitable location on your bicycle or motorcycle frame.
2. Attach the mounting bracket to the frame using the provided screws.
3. Secure the alarm unit onto the bracket.

Method 2: Using Cable Tie

1. Wrap the cable tie around the frame and through the designated slots on the alarm unit.
2. Tighten the cable tie securely.

Note: Ensure the alarm is mounted firmly to prevent dislodging during movement.

Operation

Arming the Alarm:

• Press the lock button ? on the remote control. The alarm will emit a beep, indicating it is armed.

Disarming the Alarm:

• Press the unlock button ? on the remote control. The alarm will emit two beeps, indicating it is disarmed.

Adjusting Sensitivity:

• Press and hold the lock button ? for 3 seconds while the alarm is armed. The alarm will beep once for low sensitivity, twice for medium sensitivity, and three times for high sensitivity.

Emergency Function:

• In case of theft, the alarm will sound a loud siren ? when triggered by vibration.

Battery Replacement

The alarm unit uses a 9V battery. The remote control uses a 12V 23A battery.

• For the Alarm Unit: Open the battery compartment cover and replace the 9V battery.
• For the Remote Control: Slide open the back cover and replace the 12V 23A battery.

Note: Use high-quality batteries for optimal performance.

Troubleshooting

• Alarm not responding to remote: Check battery levels in both the alarm and remote. Ensure they are within range.
• False alarms: Adjust the sensitivity level to a lower setting. Ensure the alarm is securely mounted.
• Siren not sounding: Check the battery in the alarm unit.

Specifications

Contact Information

For further assistance or inquiries, please refer to the manufacturer's website or contact their customer support.