ERM Advanced Telematics
Email: info@ermtelematics.com | Tel: +972-3-9413313 | Fax: +972-3-9413316
ERM Electronic Systems LTD | 16 Hasar Shapira St. Rishon Lezion, Israel | www.ermtelematics.com
StarLink OnBATT 4G (CAT1) SF iRF
Compact Waterproof Tracking Device
[Image: A compact, black, rectangular tracking device, approximately the size of a small external hard drive.]
The StarLink OnBATT is a compact vehicle tracking device designed for fast installation directly onto a vehicle battery. It supports applications such as Usage-Based Insurance (UBI) and features a waterproof casing. The device offers standard short-range wireless communication for accessories, add-ons, and integration with mobile applications.
Leveraging ERM's Safety technology, StarLink OnBATT provides real-time information on unsafe driving behaviors, including careless driving, accidents, and speed violations. It automatically identifies 20 different maneuver types across three severity levels: Regular, Aggressive, and Dangerous.
As part of ERM's Safety technology, StarLink OnBATT is equipped with 'Black-Box' mode. This mode detects real-time accident events and stores all data before and after the incident at a high sampling rate of 100 times per second, enabling accurate post-accident analysis.
Installation is straightforward: simply attach the device to the top of the vehicle's battery and connect the power. The device is then installed and operational.
Product brochure version: 4.1.1
Key Features
- Small size
- Fast installation process
- Driver behavior monitoring
- Black-Box mode for accident data recording
- Waterproof casing
- Output Logic Programming (OLP) for complex output signal generation
- Vehicle battery diagnostics: charge, voltage, and battery life (SoH)
- FOTA (Firmware Over The Air) updates
- Embedded antennas
- Immobilization system support
- Geo-zone protection
- Dedicated single wire communication port for Add-Ons and Accessories
Available Variants
The StarLink Tracker comes with a variety of options for cellular communication technology. Variants include:
- 4G (CAT1): The device comes with a 4G LTE CAT1 cellular module for communication technology, supporting specific band frequencies (e.g., Australian band frequencies).
- SF (Sensor Fusion): Features a 3D high sensitivity accelerometer and gyro supported with ERM's Safety technology for Driving Behavior analysis and BlackBox feature. The technology can identify 20 maneuver types in 3 levels. The functionality offers event-based driving behavior alerts.
- iRF (Intelligent RF): The device comes with a two-way standard short-range RF communication module. This can be used to transmit data between the device and a mobile phone/tablet or read data from a variety of external sensors and tags.
Technical Specifications
| Parameter | Specification |
|---|---|
| Cellular | Quectel ec21 AU, LTE CAT1 (bands: 1,2,3,4,5,7,8,28,40). All cellular options come with optimized embedded antenna. |
| Location | GPS/GLONASS/GALILEO, Active antenna, Sensitivity -165 dB, NMEA0193, Acquisition (normal): cold <34s, warm <34s, hot <1s, accuracy: 2.5m CEP. Embedded optimized antenna. |
| Communication | Text messages, TCP/IP over GPRS/UMTS/EDGE/HSPA, Standard short range communication module v4.0. |
| Power Supply | 9-32VDC, 20-30mA |
| Backup Battery | Rechargeable, 3.6V, 350mAh (Li-ion) |
| Configuration / Firmware Update | OTA/Via Standard PC USB Port, parameters setup, software programming. |
| Data Logger | Up to 8,000 messages |
Environment
| Parameter | Specification |
|---|---|
| Operating Temperature | -20 to 70° C |
| Storage Temperature | -40 to 85° C |
| Dimensions | 10cm x 5.9cm x 2.3cm |
| Weight (NET) | 120g |
| Durability | Water resistance |
| Max. Relative Humidity | 70(±5)% |
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
HOME | ERM Telematics