Home - Visionis
Installation Guide for VISIONIS models including: VIS-SS1500-DL 1500 Lbs Outdoor and Gate Electromagnetic Lock, VIS-SS1500-DL, 1500 Lbs Outdoor and Gate Electromagnetic Lock, Outdoor and Gate Electromagnetic Lock, Gate Electromagnetic Lock, Electromagnetic Lock, Lock
Visionis VS-SS1500-DL - 1500 Lbs Outdoor and Gate Electromagnetic Lock with Armored Door Loop
Locking Devices
File Info : application/pdf, 2 Pages, 1.19MB
DocumentDocumentTechnology Within Your Reach 1500 Lbs Outdoor and Gate Electromagnetic Lock with Armored Door Loop ref. VIS-SS1500-DL Installation User Guide (Indoor Models) Basic Installation Concept & Accessories Side Mounting Mounting Plate (Side Bar) Armored Loop Cable Wire Armature Screw Self-tapping Screw Armature Plate Anti Residual Magnetism Button Allen Wrench Rubber Washer Guide Pin Sexnut Bolt Metal Washer General Installation Steps & Maintenance 1. Drill the armature plate holes in the door using the sticker template provided. 2. Attach the armature plate to the door with the hardware provided as per the illustration. 3. With the door closed, mark the door frame at the edge of the armature in order to properly align the electromagnet to the armature. 4. Attach the mounting plate to the door frame using the self-tapping screws provided. Align the mounting plate with the mark from the previous instruction. 5. Insert the wires through the hole in the mounting plate and attach the electromagnet unit to the mounting plate with the allen head fixing screw. 6. Connect the power wires according to the instruction and test the system. 7. It is recommended that to apply a light coat of silicon lubricant to the mating surface on a monthly basis to prevent rust. Wiring Instructions IMPORTANT! Before the power supply is switched on, set the wiring correctly. RED YELLOW WHITE BLACK 12 VDC + RED YELLOW + - WHITE BLACK - 24 VDC REED SENSOR CONTACT GREEN BLUE ORANGE NC NO COM Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for any damage or fees that can occur. sales@visionistech.com www.visionistech.com Technology Within Your Reach 1500 Lbs Outdoor and Gate Electromagnetic Lock with Armored Door Loop ref. VIS-SS1500-DL Specifications Voltage Input: 12 VDC / 24 VDC Current Draw: 12V / 450mA; 24V / 220mA (±5%) Holding Force: Up to 1500 lbs (682 kg) Hall Effect Reed Contact: 28 VDC, 0.2A, 5W Anti-Rust Surface Treatment: Blue Zinc Plating Operating Temperature: 0°C~55°C ( 32°F~131°F) Operating Humidity: 0~95% (non condensing) Weight (Magnet): 6.6 kg (±1%) Dimensions: Magnet - (L) 230 x (W) 72 x (T) 48 mm - (L) 9.05 x (W) 2.83 x (T) 1.89 in. Armature - (L) 200x (W) 70x (T) 16.5 mm - (L) 7.87x (W) 2.75x (T) 0.65 in. Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for any damage or fees that can occur. sales@visionistech.com www.visionistech.com