di-soric LA 72-25-1775-1960 I-H
Light Grids
Key Features
- Horizontal beam evaluation
- Integrated evaluation electronics
- Switching output
- Fault alarm output
- Compact design
- Aluminum housing
- Easy to install
Product Diagrams and Wiring
Component Overview
The light grid consists of a Transmitter and a Receiver. The diagram illustrates the Transmitter (labeled 1), Receiver (labeled 2), and the Monitoring Height (labeled 3). It also shows the Profile Length (labeled 4) indicated by 'L' and points to the Synchronous Beam (labeled 5) and Profile Cross Section (labeled 6).
Physical Dimensions
The profile cross section measures 12 x 24 mm. The main dimensions are: A: 80 mm, B: 600 mm, X: 20 mm, Y: 160 mm. The total profile length is 1,960 mm.
Wiring Connections
The Sender (Transmitter) has connections for Brown (BN) for positive (+), Blue (BU) for negative (-), and Black (BK) for signal.
The Receiver has connections for Brown (BN) for positive (+), Blue (BU) for negative (-), and Yellow (YE) for the ALARM output. Both outputs are described as pnp.
Technical Specifications
General Data
| Parameter | Value |
|---|---|
| Service voltage | +20°C, 24 V DC (20.4 ... 28.8 V DC) |
| Power consumption | 8 W |
| Assembly | Threaded bolt (4) |
| Profile cross section | 12 x 24 mm |
| Dimension A | 80 mm |
| Dimension B | 600 mm |
| Dimension X | 20 mm |
| Dimension Y | 160 mm |
| Profile length | 1,960 mm |
| Housing material | Aluminum (silver, Anodized) |
| Protection class | III, operation on protective low voltage |
| EMC directives | EN 61000-6-3:2001 / EN 61000-6-1:2001 |
| Evaluation | horizontal |
| Evaluation electronics | integrated |
| Output function | Light switching |
| Switching output | pnp, 200 mA, NC, short-circuit-proof |
| Light source | LED |
| Color | Infrared |
| Wavelength | 880 nm |
Additional Data
| Parameter | Value |
|---|---|
| Beam evaluation | via integrated evaluation electronics |
| Beam separation | 25 mm |
| Number of beams | 72 |
| Monitoring height | 1,775 mm |
| Range | 700 ... 4,000 mm (factory setting) |
| Display | LED (Service voltage / output stage, error (alarm)) |
| Cycle time per light beam | 1 ms |
| Total cycle time | Anzahl Lichtstrahlen x 1 ms + 4 ms |
| Basic processing time | 4 ms |
| Ambient temperature during operation | -10 ... +45 °C |
| Protection type | IP 54 (IP 65 optional) |
| Connection | Cable, 4.0 m (with ferrule) |
More Information
For more details, please visit: https://www.di-soric.com/209630
di-soric – Solutions. Clever. Practical.
