Soundliving Move Manual

Technical Specifications

Package Contents

The package includes:

• Soundliving Move Speaker
• USB-C charging cable
• 3.5mm AUX cable
• Strap

Automatic Pairing

1. Connect your Move to your smartphone by pressing and holding the POWER button for one second.
2. Your Move will appear in the list of devices in your Bluetooth settings.

Status: ENHEDEN SOUNDLIVING-SL36 ER FORBUNDET (The unit SOUNDLIVING-SL36 is connected)

Charging

1. To charge your Move, tilt open the cover located on the side of the speaker.
2. Under the cover, you will find the USB-C charging port. Insert the included USB-C charging cable into the speaker and charge it via an adapter or PC.
3. A red LED will light up when your Move is charging and turn off when it is fully charged.

Battery Indicator:

• Red LED: Charging
• Off: Fully Charged

Answering Calls

• Answer incoming calls with your Move by pressing the TWS button.
• Press once to answer and once to end the call.
• Hold the TWS button for over 2 seconds to reject a call.

Music Playback

• Press and hold the POWER button for 2 seconds to turn on your Move.
• Press the POWER button once to play or pause music.
• Press and hold the '+' button for 2 seconds to skip to the next song.
• Press the '+' button one or more times to increase the volume.
• Press and hold the '–' button for 2 seconds to skip to the previous song.
• Press the '–' button one or more times to decrease the volume.
• When using the AUX cable, you can switch between AUX and Bluetooth by pressing the TWS button twice.

True Wireless Stereo (TWS) Setup

1. Start by turning on both speakers. The LED on both will then blink blue.
2. During Bluetooth pairing, press the TWS button once on the primary speaker to connect it to the secondary speaker. You will then hear "Right channel" and "Left Channel" from both speakers – they are now connected.
3. Then, connect your smartphone to the primary speaker to play music from both.

Disconnecting True Wireless Stereo

1. Press the TWS button on either speaker to disconnect them from each other.
2. The two speakers will no longer be connected, and only your primary speaker will play music.

Warnings

• Do not wash the speaker when the USB cover is open or loose.
• Do not use alcohol, thinner, detergent, shampoo, or other solvents for cleaning.
• Do not intentionally immerse in water.
• Do not wash the speaker in a washing machine.
• Do not expose your speaker to extremely high or low temperatures.
• Do not disassemble your speaker in any way to avoid electric shock.
• Do not throw your speaker into a fire. The battery can explode and cause injury or death.
• Only charge the battery in accordance with the company's instructions.
• The speaker is not completely waterproof where the sound is emitted; the sound may be muffled if water enters.
• If this happens, hold the speaker and clap 10-20 times to remove water. Place a dry cloth under the speaker for 2-3 hours.

Note: It is recommended to dry the unit for 24 hours in a dry environment before charging after exposure to water.

Warning:

• The risk of explosion increases if the battery is replaced with an incorrect type.
• Dispose of used batteries according to instructions.

Instructions:

• Do not dispose of used batteries with household waste.
• Battery disposal must comply with local environmental regulations.

Contact Information

• Website: www.soundliving.dk
• Phone: +45 7199 3479
• Email: kontakt@soundliving.dk
• Address: Unionsvej 11, 4600 Køge