Marking_ LED2406G4NA E26_NA

Product Overview

[Image of an LED bulb with an E26 base.]

Marking Position: Indicated on the product.

Product Details:

Model: LED2406G4NA
Base Type: E26
Voltage/Frequency: 120V~60Hz
Lumen Output: 450lm
Efficacy: 110lm/W
Power Consumption: 4.1W
Current: 47mA
Color Temperature: 2700K
Certifications: [TÜV Rheinland certification mark]
Manufacturer: IKEA of Sweden AB
FCC ID: FHO-LED2406G4NA
IC: 10912A-LED2406G4NA

Safety Warnings

English

CAUTION: RISK OF ELECTRIC SHOCK- USE IN DRY LOCATION ONLY. DO NOT USE WITH STANDARD DIMMERS, SEE INSTRUCTIONS.

French

ATTENTION: RISQUE DE CHOC ÉLECTRIQUE - UTILISER DANS UN EMPLACEMENT SEC UNIQUEMENT. NE PAS UTILISER AVEC DES GRADATEURS STANDARD, SE REPORTER AUX INSTRUCTIONS.

Marking and Code Information

Remark: "WS" should be bold.

QR Code Content: MT: Base-38 code. This code is created by Version, Vendor ID, Product ID, Custom Flow, Discovery Capabilities Bitmask, Discriminator, Passcode, Padding, and TLV Data.
(Chinese: 二维码生成格式: MT:Base-38编码内容 MT:为固定值,Base-38编码内容需要通过:Version, Vendor ID, Product ID, Custom Flow, Discovery Capabilities Bitmask, Discriminator, Passcode, Padding, TLV Data进行加密算出)

Manual Code: Created by 11 digits, consisting of VidPidPresentFlag Discriminator, Discriminator, and Passcod. The text font is Arial, 6pt.
(Chinese: 数字码生成格式:由11位纯数字组合而成,字体是Arial, 6pt 数字是由:VidPidPresentFlag Discriminator, Discriminator, Passcod, 校验码(Verhoeff)加密计算得出)

QR Code Size: 8mm*8mm. The diagram indicates dimensions of 3.5mm*3.5mm for the manual code area and 8mm for the QR code height/width.

Visual representation of codes: [Diagram illustrating dimensions of the QR code and manual code area, with labels for size and content type. Includes a stylized symbol, numbers 1234, 567, 8910, and a QR code.]

Country of Origin Marking Guidelines

The marking "MADE IN XXXABCDE" requires specific updates based on the manufacturing location:

Thailand: "Made in XXX ABCDE" should be updated to "Made in Thailand, 50170".
(Chinese: 若在泰国生产,Made in XXX ABCDE应该改为 Made in Thailand, 50170.)
When Made in Thailand, the marking "Made in XXX ABCED" will become "Made in Thailand 50170".
(Chinese: When Made in Thailand, Made in XXX ABCED will be Made in Thailand 50170)
China: "Made in XXX ABCDE" should be updated to "Made in China 50050".
(Chinese: 若在中国生产,Made in XXX ABCDE应该改为 Made in China 50050)
When Made in China, the marking "Made in XXX ABCED" will become "Made in China 50050".
(Chinese: When Made in China, Made in XXX ABCED will be Made in China 50050)

Document Control

Drawing	Description ♦ ♦	Name	Replaces document	No. of Pages	Doc number	Version
				1 (1)

Document Source: IKEA of Sweden AB

Drawing Notes: Measurements according to the SI systems. This drawing is IKEA` property and is covered by industrial and intellectual property rights and should, without written consent from IKEA, in no way be copied, reproduced or communicated or otherwise used for any other purpose other than that which has been agreed.

Template Version: 3.0

Document Format: A4

	Confidentiality Request for FCC ID FHO-LED2406G4NA - IKEA of Sweden AB Confidentiality request letter from IKEA of Sweden AB to the Federal Communications Commission (FCC) regarding FCC ID FHO-LED2406G4NA, detailing permanent and short-term confidentiality for various exhibits.
	IKEA LED2406G4NA RF Test Report TÜV Rheinland test report detailing the RF performance of the IKEA LED2406G4NA LED lamp, covering Bluetooth, Zigbee, and Thread capabilities, tested against FCC and RSS standards.
	IKEA of Sweden AB U.S. Agent Designation for FCC Service of Process Official designation of Go Global Compliance, Inc. as the U.S. Agent for Service of Process for IKEA of Sweden AB, related to FCC Certification requirements. Includes contact details and acknowledgments.
	IKEA Attestation Statement for FCC ID FHO-LED2406G4NA This document contains an attestation statement from IKEA of Sweden AB to the Federal Communications Commission (FCC) regarding equipment authorization for FCC ID FHO-LED2406G4NA, confirming it is not 'covered equipment' under FCC rules.
	IKEA FHO-LED2406G4NA Attestation Statement - Not Covered Entity Applicant Attestation statement from IKEA of Sweden AB regarding FCC ID FHO-LED2406G4NA, certifying it is not a covered entity applicant for covered equipment, as required by Section 2.911(d)(5)(ii) of FCC regulations.
	IKEA LED2406G4NA Self-Ballasted LED Lamp EMC Test Report This report details the Electromagnetic Compatibility (EMC) testing performed on the IKEA LED2406G4NA self-ballasted LED lamp, covering conducted and radiated emissions according to FCC and ICES standards.
	Safety Human Exposure Compliance for LED2406G4NA This document details the Radio Frequency (RF) exposure compliance for the IKEA LED2406G4NA self-ballasted LED lamps, covering FCC and IC regulations, product classification, exposure limits, and test results for BLE, Zigbee, and Thread modes.
	TÜV Rheinland Test Report: IKEA LED2406G4NA Zigbee RF Performance This TÜV Rheinland test report details the RF performance evaluation of the IKEA LED2406G4NA LED lamp, covering Zigbee functionality, conducted and radiated emissions, bandwidth, and output power according to FCC and RSS standards.