Instruction Manual for CRYSTORAMA models including: 6623-VG-CL-MWP Othello Three Light Chandelier, 6623-VG-CL-MWP, Othello Three Light Chandelier, Three Light Chandelier, Light Chandelier, Chandelier
Othello Three Light Chandelier in Vibrant Gold
Crystorama 6623-VG-CL-MWP at Wolff Design Center Plumbing showrooms serving Akron, Medina, Sandusky, and Toledo-Maumee, Ohio since 1965. Traditional - Akron-Medina-Sandusky-Toledo-Maumee-Ohio
Othello 3 Light Vibrant Gold Mini Chandelier : 6623-VG-CL-MWP | LIGHT by Alexandria Electric
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #6623-VG-CL-MWP WARNING: 72" A D Electrical Danger Turn Power Off All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. UL B A A D BC D You will need 3-Candelabra Base Bulb 40Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is damp rated How to Install For hanging: 1.Place the shade over the frame then place the top assembly over the shade .Make sure the slot in the top assembly is aligned with the shade spoke. Secure the shade with the loop. For ceiling: 1.Place the shade over the frame then place the canopy 2 over the shade .Make sure the slot in canopy 2 is aligned with the shade spoke. Secure the shade with a hex nut. 2.After safely attaching the fixture into the outlet box, install bobeches,bulbs and proceed to connecting the power 3.When you begin to dress the fixture, start with packet labeled (A) 4.IMPORTANT: Apply crystal sets in alphabetical order Crystal Sets B A. (14mm+50mm)x9sets A A D BC B. (Square+50mm)x6sets C. (14mmx6Pcs)x6sets A D. (14mmx11Pcs+30mm Ball)x1set B C D B C B Outlet box A B C E F G H I J K LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #6623-VG-CL-MWP Part Number D LOOP J L K Part Numbers A. (3)-Wire Connector B. (1)-Mounting Plate C. (1)-Ground Screw D. (1)-Nipple E. (2)-Outlet Box Screws F. (1)-Canopy 1 (W5.1"xH1") XEH6623VGCAN5IN G. (1)-Collar Loop H. (1)-Collar Ring I. (1)-Chain;72",4mm XEH6623VGCHA4MM J. (1)-Top Assembly K. (1)-Frame L. (1)-Fabric Shade (W14"xH6.5") XEH6623SHA14IN M. (3)-Bobeche (D3.9" x Hole:1") XEH6623BOB4IN N. (3)-Metal Sleeve (H2.75")XEH6623VGMCDL2.75IN O. (3)-Plastic Sleeve (H2.75") XEH6623PCDL2.75IN P. (1)-Canopy 2(W4.25"xH1") XEH6623VGCAN4.25IN Q. (2)-Ball Nuts XEH6623VGBANUT R. (2)-Screws S. (3)-Wire Connector Place the (L) Fabric shade and (J) Top L M assembly on top of (K) Frame then secure by tightening the loop on the (J) Top Assembly. N O For Ceiling Outlet box R P S L k P Q K Hex Nut Place the (L) Fabric shade and (P) Canopy on top of (K) Frame then secure by tightening the hex nut on the (P) Canopy L