AJAX Systems
Ajax Relay (9NA)
Product Overview
The Ajax Relay is a remote-controlled low-current relay featuring dry contact terminals designed to control appliances and electrical circuits.
Technical Specifications
Feature | Specification |
---|---|
Frequency range | 905-926.5 MHz FHSS (complies with Part 15 of the FCC rules) |
Maximum RF output power | 5.96 mW |
Radio signal range | 3,200 ft (line-of-sight) |
Power supply voltage range | 7 – 24 V (DC only) |
Device energy consumption | Less than 1 W |
Overvoltage protection | Yes, min – 6.5 V, max – 36.5 V |
Maximum load current | 5 A at 24 V DC, 13 A at 230 V AC |
Output power (resistive load 230 V) | Up to 3 kW |
Max. temperature protection | Yes, over 149°F at the place of installation or over 185°F inside Relay |
Housing protection | IP20 |
Operating temperature range | From 32° to 147°F |
Operating humidity | Up to 75% |
Dimensions | 1.54 x 1.3 x 0.70 inches |
Weight | 0.88 oz |
Complete Set Includes
- 1 x Ajax Relay
- 2 x Connecting wires
- 1 x Quick Start Guide
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
To maintain compliance with ISED's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna.
[Note: The original document also contains this section in French.]
Caution
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Warranty and Support
Warranty for Ajax devices is valid for two years after the purchase date. If the device does not work correctly, contact the support service. Technical issues can often be solved remotely.
The full text of the warranty is available on the website: ajax.systems/warranty
User Agreement: ajax.systems/end-user-agreement
Technical support: support@ajax.systems
Manufacturer: AJAX SYSTEMS MANUFACTURING LIMITED LIABILITY COMPANY
Address: Sklyarenka, 5, Kyiv, 04073, Ukraine.
Website: www.ajax.systems