Installation Guide for Garnet Instruments models including: 709-P3W SeeLeveL II Tank Monitor, 709-P3W, SeeLeveL II Tank Monitor, Tank Monitor, Monitor

709-P3W Wiring Diagram

Wiring diagram – System Installation

Holding Tanks Solution - Garnet Instruments

Download

709-P3W SeeLeveL II Tank Monitor - Garnet Instruments

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 554.03KB

Document Document

TM
709-P3W Wiring Diagram

Display
Pump Switch Connector (see diagram below)

LPG Green

Pigtail B (6-pin)

Blue Sender Black Ground

3-way Pump Term 1 3-way Common 3-way Pump Term 2

Pump LED white wire connects to the pump
side of all switches
Red wire +12V power input to monitor

3-WAY SWITCH WIRING DIAGRAM

709 SWITCH

EXISTING BATHROOM

Ground

LPG Tank Does not sense LPG only. LPG connects to the existing sensor. Only relay the signal from the sensor that`s already installed.
Ground

+12V

WHITE WIRE
PUMP LED

+12V PUMP

GROUND

Fresh Sender

Grey Sender

Black Sender

W WARNING: All power circuits must be fused. If a fuse is not provided with the system then it is the installer's responsibility to install a fuse with the maximum rating of 10 amps. A relay is required if more than 10 amps needed for the pump.

Double Stacked Sender