Twelve South - Apple Accessories designed to enhance and inspire
User Guide for twelve south models including: Curve Flex Stand, Flex Stand, Stand
Curve Flex What's in the Box - Curve Flex Stand - Neoprene Travel Sleeve - Hex hinge tool
Curve Flex | Flexible Stand for MacBook | Twelve South
File Info : application/pdf, 1 Pages, 550.31KB
DocumentDocumentWhat's in the Box Curve Flex (with removable Getting Started guide) Curve Flex owner's guide Travel Sleeve (with hidden Adjustment Tool storage pocket inside) Adjustment Tool ( mm Hex Wrench located in Travel Sleeve pocket) Place Curve Flex on a desk or table. Raising and adjusting your Curve Flex while it's resting on a table is much easier and highly recommended. B A Using Curve Flex Hold down while gently li ing to its maximum height. B A C Take care not to C overextend the front hinges more than -degrees. 3 Hold down while carefully li ing until you feel it stop. B 4 Open your MacBook first, then place on Curve Flex. To adjust height & angle, hold MacBook and Curve Flex together, then gently press down. Using Curve Flex Using Curve Flex Using Curve Flex Notice this opens the back hinges to their max angle of C 35-degrees. Adjusting the tension of Curve Flex Adjustment Tool stored in Travel Sleeve Use the included Adjustment Tool to tighten (clockwise) or loosen (counter-clockwise) the four hinges on Curve Flex. Have questions? Visit twelvesouth.com or contact support@twelvesouth.com ©2022 Twelve South, LLC. All rights reserved. To RAISE the MacBook, REMOVE your MacBook first, extend Curve Flex all the way up again, then replace MacBook and adjust back down.