Home
User Guide for Lifemax models including: 1801, Professional Humidifier, 1801 Professional Humidifier, Humidifier
Model No: 1801. Rated Max. Moisture Capacity ≥180ml/h. Water Tank Capacity: 2.6L Rated Voltage: 100-240v. Rated Frequency: 50/60Hz Rated Power: 20W.
prieš 1 dieną — Model No: 1801. Rated Max. Moisture Capacity ≥180ml/h. Water Tank Capacity: 2.6L Rated Voltage: 100-240v. Rated Frequency: 50/60Hz Rated Power: 20W.
To fill the tank, start by removing it from the base by lifting it up as shown in the diagram. Turn the tank upside down and remove the tank cap by.
File Info : application/pdf, 4 Pages, 282.66KB
DocumentDocumentThank you for purchasing the Lifemax Professional Humidifier. Our Professional Humidifier boasts a high velocity output, pushing particles high into the air to provide enhanced coverage. The simple rotary control offers continual power adjustment with auto-off feature. Quiet in operation, this Humidifier is ideal for use in the bedroom for relief from dry air. To fill the tank, start by removing it from the base by lifting it up as shown in the diagram. Turn the tank upside down and remove the tank cap by screwing it off in an anti-clockwise B direction. Fill the tank as desired or up to the max level shown on the tank. Do not overfill the tank. Replace the cap by screwing it back onto the tank in a clockwise direction. Ensure the cap has been correctly and securely replaced on the tank, then turn the tank upright and place back onto the base. Plug the power into a mains socket. Turn the control knob on the front of the Humidifier in a clockwise direction to commence operation, a blue light on the water level indicator will come on and mist will begin being produced from the top of the Humidifier. To adjust the mist output turn the control knob on the front of the Humidifier to the desired level. To turn the machine off, turn the control knob in an anti-clockwise direction as far as it will go, the blue indicator light will turn off. Please note that if your Humidifier runs out of water it will stop working until the water tank is refilled. To ensure your Humidifier continues to work at the best of its capability it is important to clean and maintain it regularly, especially if you are in a hard water area. We recommend using distilled or de-mineralized water as tap water can contain minerals that will create deposits inside your Humidifier and can affect its operation. Clean the base by removing the water tank and partially filling the cavity with 8-oz undiluted white Fill here vinegar (see diagram 1). Leave this solution in the base for 20 minutes. Clean the inside of the tank by half filling it with hot water, add half a cup of white vinegar, then replace the tank cap and shaking vigorously for one minute. Pour the solution away and rinse the tank thoroughly twice. After 20 mins pour away the vinegar solution from the base and gently scrub the area around the transducer and cavities in the base with a soft brush to remove any deposits. Rinse all parts twice with clean warm water. M odel No: 1801 Wat er Tank Capacit y: 2.6L Rat ed Fr equency: 50/ 60Hz Rat ed M ax. M oist ur e Capacit y 180ml/ h Rat ed Volt age: 100- 240v Rat ed Pow er : 20W PROBLEM No mist REASON Not plugged in Not powered on No water in tank Overfilled tank Peculiar mist smell New machine Dirty or old water Strange noise Water in tank but no operation Tank not installed correctly No water in tank Machine on unlevel surface - Lifemax Ltd 1 Pipers Court, RG19 4ER www.lifemaxuk.co.uk Please retain for reference SOLUTION Plug into main Turn mains on Add water Remove water Remove tank and dry thoroughly. Leave for 12 hours before operating again Clean the tank and replace the water Remove tank and reinstall ensuring correct installation Check water level Place on a flat, level surface Turn off, remove tank, replace tank and turn back on.