Step 1: Assemble Floating Shelves
Attach two (2) L-shaped brackets (Item 2) to one (1) wooden shelf board (Item 1) using fourteen (14) short screws (Item 6) and a screwdriver. Ensure a firm connection.
[Diagram Description: Shows brackets being screwed onto a shelf board.]
Tips:
Avoid over-screwing to prevent loosening screws or damaging the wood board.
Step 2: Assemble Wire Storage Basket
Align the wire storage basket (Item 3) with one (1) wooden shelf board (Item 1) and secure it using six (6) short screws (Item 6).
[Diagram Description: Illustrates a wire basket attached to a shelf board.]
Step 3: Put up on the Wall
Position the assembled shelf unit against the wall. Use the bubble level (Item 4) to find a horizontal line and mark the wall through the bracket holes.
[Diagram Description: Shows marking wall points through bracket holes using a level.]
Drill holes at the marked points, insert plastic wall anchors (Item 8) with a hammer, and then fix the shelf to the wall using ten (10) long screws (Item 5).
[Diagram Description: Shows drilling, inserting anchors, and securing the shelf with long screws.]