Instruction Manual for SOMiC models including: G810DONGLE, 2A3UU-G810DONGLE, 2A3UUG810DONGLE, G810 Wireless Gaming Headset, Wireless Gaming Headset
Guangdong Shuoqiang Electronics Co.,Ltd G810DONGLE G810 2A3UU-G810DONGLE 2A3UUG810DONGLE g810dongle
File Info : application/pdf, 1 Pages, 3.82MB
DocumentDocument( G810 :V5.2 CLASS2 10 2402-2480MHZ 1000mAh DC 5.0V 500mA 3 50LOGO, 60% USB5V 50mA /// HFP1.7HSP1.2A2DP1.3AVRCP1.6 AACSBC Dongle 5. "MIC OFF" "MIC ON" 2Bee Play ModeMusic mode 6.LOGO 7. In coming call 1 8. 9. 4 "low Power"3 10 " low Power", 11. +/ -/ MFB MIC 1210 "" 3 13 3.5mm 1,; 2,,; 3,2 4,CCC; 5,,"", , 1 1 2Type C 1 3 1 4Type-C 1 53.5mm 1 6Dongle(USB-AType-C,) 1 1. 2. LOGO Type C Line IN 3.5mm +/ "Max volume" -/: "Min volume" MFB 12,"Power on" 23"Power off" 36"Pairing" 4/: , 5/1 LOGO MIC/ 1"MIC OFF" "MIC ON" 22Gaming modeMusic mode 1 2 3, 4/3 Line IN 3.5mm3.5mm, Type CDC5V/1000mA : 1 3.5mm 2"" 335ms 4 51000 6 7 1.Dongle 2"Power on", Pairing 6 "SOMiC G810"" Connected" / Type-CDongle(USB-AType-C "Connected" USB 2. 3"Power off" 3+/ 11 "Max volume" 4-/ 11 "Min volume" Product Specification Bluetooth version:V5.2 Transmit powerCLASS2 Wireless connection rangeabout 10m Operating frequency range2402-2480MHZ Build-in rechargeable lithium battery capacity: 1000mAh Connection charger specificationDC 5.0V 500mA Normal charging timeabout 3 hours Headset continuous working timeabout 50 hoursTurn off LOGO light, 60% volume play music Dongle power: USB5V Dongle working electric current:50mA Product function support stereo music playback, play / pause, volume size / music selection up and down, microphone off / on and other functions support telephone: answer, end, reject, redial the last number and other common functions support operation voice prompt support earphone low battery prompt support hfp1.7, hsp1.2, a2dp1.3, avrcp1.6 support AAC and SBC audio decoding support low delay game function (dongle connection) Switch between bee play mode and music mode: long press the key for 2 seconds to switch modes, and there is a voice prompt of bee play mode or music mode 6. Light button: briefly press the button by once to turn off or turn on the light. 7.Calls When the connected mobile phone has an incoming call, the voice prompts"In coming call", and the blue light of headset flashes.Press once to answer the call,the blue light of headset will be on when answering the call,press again to hang up the call,press and hold for 1 second to reject the call 8.Last number redial When the headset connected the mobile phone, short press twice in succession,the device will automatically redial the last phone number dialed by the mobile phone 9.Low power warning This headset has a low-power voice prompt function.When the battery enters a low-power state,there will be a voice prompt "low power"every 4 minutes,and the red indicator light of the headset flashes twice every 3 seconds. 10.Charging instructions The headset has a lithium battery, and it is recommended for you to charge the battery before first using the headset. When the battery power of the headset is too low during use, there will be a "Low Power" prompt sound, please charge it in time. Insert the charging plug into the Type C port and the headset will automatically shut down. At this time, the charging red indicator light will be on. When it is fully charged, the red indicator light will turn off and the green indicator light will stay on. Key and socket definition Volume + / next key Volume - / previous key Bluetooth indicator window Multifunction key MFB Light switch button Mic key / sound effect mode switch key Left and right ear shell lights Charging status indication window Type C charging interface Line in 3.5mm audio input interface 11.Bluetooth transmitter instructions The Bluetooth headset and the Bluetooth transmitter have been paired at the factory settings. Plug the Bluetooth adapter into the USB port of the computer(or use the dongle extension cable on the USB interface)/mobile phone , and the headset will automatically connect after it is turned on. 12.Headset restores the factory setting Under the shutdown state, long press and button for 10 seconds to sound the prompt "beep" when the factory setting is completed. The blue light and red light of the headset double flash 3 times at the same time.(Note: Headphone recovery from factory settings removes all previous pairing information) 13.wired mode: Connect the 3.5mm audio cable to the headset; In this mode, only the microphone on the audio cable can be used, and the microphone on the headset cannot be used. Reminder 1. Please read the operating instructions carefully and keep them properly before using this product; 2. Please charge the product for the first time; 3. In order to maintain the normal service life of the battery, please ensure that the product is used at least once in two weeks, and please supplement the power in time after use. 4. Chargers produced by regular manufacturers and certified by CCC must be selected; 5. If the mobile phone cannot receive the Bluetooth headset, please confirm whether the Bluetooth headset is in the "pairing mode". If the headset has not been paired or connected for a long time, please restart the headset or restore the factory settings before using. Headset and Accessories 1.Headset 1PC 2.Type c charging 1PC 3.User Manual 1PC 4.Dongle 1PC 5.3.5mm Audio cable 1PC 6.Dongle Extension cable 1PC Using Statement 1.Do not use headphones during charging 2.When wearing headset outdoors, choose safe sports venues and roads, adjust the appropriate volume, and pay attention to traffic safety 3.Do not use headset while driving a motor vehicle After-sales service In order not to waste your valuable time, please check the following items before repair. Volume + / next key: short press once to increase the volume by one level, long press to switch to the next song; When the volume reaches the maximum, there will be a "Max volume" prompt tone. Volume - / previous key: short press once to reduce the volume by one level, long press the previous key; When the volume is reduced to the minimum, there will be a "Min volume" prompt tone Multifunction key MFB (1) Power on: press and hold for about 2 seconds, and the voice prompts "power on". (2) Power off: in the power on state, press and hold for about 3 seconds to power off, and the voice prompts "power off". (3) Pairing: in the off state, press and hold for about 6 seconds to enter the pairing state, and the voice prompts "pairing". (4) Play / pause: when playing music, press once to play or pause music. (5) Answer / end an incoming call: when there is an incoming call, short press once to answer the call, and long press for 1 second to reject the call; During a call, short press once to end the current call. Light switch button: turn off / on the logo light effect. Mic key / sound effect mode switch key 1Press once to turn off the microphone, and the voice prompts "mic off"; Press again to turn on the microphone, and the voice prompts "mic on". 2Switching between game mode and music mode: long press for 2 seconds to switch modes, and there is a voice prompt of "game mode" or "music mode". Bluetooth indicator window 1Startup blue light flashes slowly 2Pairing status red and blue lights flash alternately 3The blue light flashes quickly when an incoming call is made, and the blue light stays on after answering the call Type C charging interface: the connected charger is dc5v/1000ma, and the headset will automatically shut down when plugged in for charging. 4Red light double flashing /3 s at low battery Line in 3.5mm audio input interface: when a 3.5mm plug cable is inserted, the headset will automatically shut down and play the signal of the external device. (the microphone of the headset does not support wired input) Charging status indication window: the red light will be on for a long time during charging, and the red light will go out and the green light will be on for a long time after being fully charged. Left and right ear shell lights: the ear shell lights up after startup, and can be turned off or on by operating . Basic Operation Instruction 1.Turn on&Paring Long press the button for about 2 seconds in shutdown mode, the Bluetooth headset enters the power-on state (voice prompt "Power on"). When the headset is powered on, Paired will be connected firstly; those never paired enter pairing state (voice prompt Pairing). In the pairing state, devices with Bluetooth function, such as mobile phones, can search for and connect to the headset, and exit the pairing state after the connection is successful. Manually enter matchingIn the shutdown state, long press the "" button for 6 seconds, the headset will directly enter the pairing state after it is turned on. After the earphone enters the pairing state, the red and blue indicator light flashes alternately in the work indicator window. Turn on the Bluetooth function of the mobile phone, set it to discoverable state, and add or search for a new device. Find "SOMIC G810" in the device list, and select pair. Then the headset connects to the mobile phone successfully, and the voice prompt "Connected" is displayed, that is, the pairing process is complete. Product Features 1.The headset has four connection modes, including normal Bluetooth mode, Bluetooth low-latency mode (USB-A and Type C connection modes) and 3.5mm wired mode, which can be used in various scenarios and devices. 2.Headset with game mode and music mode two kinds of sound, listening to songs, games can be. 3.The headset comes with a powerful low latency engine, which can be as low as 35ms to enjoy the game experience of audio and picture synchronization. 4.The headset is ergonomic and lightweight, which makes it easy to wear for a long time. 5.The headset has a built-in 1000mah battery, which can last you a week on a single charge. 6.The headset are equipped with soft and breathable large size mesh earmuffs for comfort. 7.Headset with cool lighting, release the passion of e-sports. Bluetooth transmitter pairingBluetooth transmitter is inserted into the computer USB port, when the equipment identification is completed, the blue lights flash slowly, with a thimble by pairing inside the shell of the round hole pressing button for 2 seconds, pairing blue tooth transmitter into the state, the blue indicator light flash, when the blue tooth transmitters and blue tooth headset paired and Connected successfully finished, voice prompt "Connected", The blue light on the Bluetooth transmitter will light up. RemarkThe Bluetooth headset and the Bluetooth transmitter have been paired at the factory settings. Plug the Bluetooth adapter into the USB port of the computer, and the headset will automatically connect after it is turned on.If it can't match,pls follow previous step to re-match again for headphone and USB dongle. 2.Power off When the Bluetooth headset is on, long press the "" button for about 3 seconds, and at the same time, there will be a prompt tone of "Power off", and the Bluetooth headset will turn off 3Volume +/ Next track When the device is connected to play music, press the volume "" button once to increase the sound level by one level. When the volume reaches the maximum, there will be a prompt sound "Max volume". Long press the "" key to switch to the next track for the music. 4Volume -/ Last song When the device is connected to play music, press the volume "" button once to reduce the sound level by 1. When the volume reaches the minimum, there will be a prompt sound "Min Volume". Hold down the volume "" button long to switch to the previous track. 5. Mute MIC During a call, press the "" button once to turn OFF the microphone, and the voice prompt "MIC OFF" will be displayed. Press the "" button again to open the microphone, and the voice prompt "MIC ON" will be displayed. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. G810 Wireless Gaming Headset Instruction Manual