GODOX Photo Equipment Co.,Ltd.Declaration of Conformity-GODOX Photo Equipment Co.,Ltd.
Instruction Manual for Godox models including: 2ABYN132, 705-CBCRX0-00, Cube-C RX Receiver, Cube-C RX, Receiver
GODOX PHOTO EQUIPMENT CO.,LTD 132 Receiver 2ABYN132 2ABYN132 132
File Info : application/pdf, 3 Pages, 5.84MB
DocumentDocument2024 / 12 / 13
705-CBCRX0-00 Cube-C RX 55*70mm ±1mm 105g
PDF AI Cdr
1mm 1mm
1. TX1 2. 3.5mm 3. // 4. TX2 5. USB-C
6. 7. / - 8. /+ 9. // 10.
Cube-C RX
Receiver Instruction Manual
Cube-C RX 2.4GHz ,
· 2.4GHz · 300 · UAC · // · · /
50
79 8
1
4
2
5
6
3 10
×1
USB-C ×1
×1
/
< > 2s /
5
<
>
10s
<
> /
USB-C TX1TX2
TX1TX2DC TX1/TX2TX1/TX2
USB-CUSB-CUSB-C USB-C
<
> 2s /
-6dB
<
> 2s
<
> 2s
<
>
<
>
<
>
3.5mmTRS/
<
> <
> 3S
3
< > < > < >
1. 3.5mm TRSTRS 3.5mm3.5mm
USB-CUSB-C
Lightning(iPhone14 Lightning3.5mm TRSGAC-IC10 3.5mmLightning
GAC-IC10
USB-CLightningUSB-C Lightning
3.5mm TRSTRS
2. USB-CiPhone15 USB-C3.5mm TRSGAC-IC93.5mm USB-C
GAC-IC9
USB-CLightning
Cube-C RX
2.4GHz
300
5V 200mA
3.8V, 200mAh, 0.76Wh
10
120
-10~50
46×29×18mm
16g
( ) ( )
,
()
12
3
12
0755-29609320-8062
QC PASS
Godox Audio Wechat Official Account
Overseas Official Accounts & Updates
: 2 : 0755-25723423 : godox@godox.com
: 0755-29609320(8062)
GODOX Photo Equipment Co., Ltd. Add.: Building 2,Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com
www.godox.com Made in China 705-CBCRX0-00
Foreword
Thank you for purchasing! Godox is proud to introduce the latest receiver of the wireless microphone system Cube-C RX. With the characteristics of compact and portable, plug and play, 2.4GHz wireless transmission, as well as compatibility with various smartphones and cameras, it's quite suitable for live streaming, interview, short video recording, outdoor shooting, etc. Please read this manual carefully before using to make sure the correct operation and exert the optimum function.
Main Feature
· Globally universal 2.4GHz wireless transmission technology. · The maximum wireless transmission distance up to 300m (sight
distance) after paired with transmitter. · Supports computer UAC function, also use and charge at the same
time. · Switchable mono, stereo and safety modes. · One key noise reduction function, plug and play. · Compatibile with various smartphones and cameras.
Note: The transmitter is sold separately.
Warning
This product is high-precision instrument, please avoid falling, collision or pounding. Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center. Always keep this product dry. Do not use in rain or damp conditions. Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty. Keep out of reach of children. Do not use in flammable and explosive environments. Pay attention to the relevant warning signs. Do not leave or store the product if the ambient temperature reads over 50. Please read carefully and follow the warnings or instructions provided by the manufacturer.
Name of Parts
1 2 3
79 8
4 5 6 10
1. TX1 Indicator 2. 3.5mm Audio Output Port 3. Power Switch/Pairing/
Denoise Button 4. TX2 Indicator 5. USB-C Port
6. Back Clip 7. Mode/Volume - Button 8. Safety/ Volume + Button 9. Volume/ Safety/Mode Indicator 10. Charging Points
Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.
What's Inside
Receiver ×1
USB-C Charging Cable ×1
Instruction Manual ×1
Power Switch
Long press the power switch button < receiver.
> for 2s to turn on or off the
Flash green Unpaired after powered on Note: The receiver will be turned off if it stays unpaired in 5min after powered on.
Pairing
Short press twice the pairing button <
> to pair it with the
transmitter. It will exit pairing status once paired, while exit after 10s if
unpaired.
Flash green rapidly Pairing status
Constant on green Paired
Denoise
Short press the denoise button < function.
> to turn on or off the denoise
Constant on orange Denoise function is on
Charging
The receiver can be charged after connecting to power source through the USB-C charging cable. TX1 and TX2 indicators of receiver can show the battery levels of both the transmitters and receivers.
TX1 and TX2 indicators are constant on red Battery level of receiver is low, please charge it or switch to DC power supply
TX1 indicator or TX2 indicator flashes red Battery level of TX1 or TX2 transmitter is low
Indicator breathes blue Charging
Indicator is constant on blue Fully Charged
Mode Switch
The sound track mode of receiver is mono by default, long press the
mode/volume button <
> for 2s can switch to stereo track
mode, long press again can switch back to mono track mode.
The safety mode is also available, which can be turned on in mono
track by default, and the right channel will record the audio with -6dB
gain.
Long press the safety/volume + button < off the safety mode.
> for 2s can turn on or
<
> Constant on green Mono mode
<
> Constant on blue Stereo mode
<
> Breathes green Safety mode
Note: The stereo and safety modes are only available when connecting the receiver with a camera by 3.5mm TRS cable.
Output Volume Adjustment
Short press the safety/volume + button <
> or mode/volume
button <
> to enter volume adjustment status, then short press
the volume + button or volume button in 3s can adjust the output
volume in 3 levels. The volume is the middle level by default after first
boot.
<
> One indicator is on Lowest volume level
<
> Two indicators are on Medium volume level
<
> Three indicators are on Highest volume level
Instructions for Connection
1. Install onto Cameras Clip the receiver to the camera with its back clip, then connect the 3.5mm audio output port of receiver to the 3.5mm audio input port of camera with the 3.5mm TRS-TRS audio cable.
Note: the 3.5mm TRS-TRS audio cable is sold separately.
2. Install onto Smartphones Smartphones with USB-C port (iPhone15 and thereafter or Androids) Connect the 3.5mm audio output port of receiver to the USB-C port of smartphone with the USB type-C to 3.5mm TRS adapter cable GAC-IC9.
Note: GAC-IC9 is sold separately.
Connect the USB-C port of receiver to the USB-C port of smartphone with the USB-C to USB-C data cable.
Note: the USB-C to USB-C data cable is sold separately.
Smartphones with Lightning port (iPhone14 and therebefore) Connect the 3.5mm audio output port of receiver to the Lightning port of smartphone with the Lightning to 3.5mm TRS adapter cable GAC-IC10.
Note: GAC-IC10 is sold separately. Connect the USB-C port of receiver to the Lightning port of smartphone with the USB-C to Lightning data cable.
Note: USB-C to Lightning data cable is sold separately.
Technical Data
Name Model Transmission Type Max. Wireless Distance Input Parameters
Receiver Cube-C RX 2.4GHz Frequency Hopping System 300m (sight distance) 5V 200mA
Lithium Battery Parameters 3.8V, 200mAh, 0.76Wh
Working Time
Approx. 10h (denoise off)
Charging Time
Approx. 1h20min
Working Environment Temperature
-10~50
Dimension Net Weight
1.81 "×1.14 "×0.71 " 16g
Specifications and data may subject to changes without notice.
Maintenance
Avoid falling. Strong collision or vibration may malfunction the device. Keep dry. This product is not water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity. Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand. Keep away from strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction. Specifications and data may subject to changes without notice.
Warning
Operating frequency:2402MHz - 2480MHz Maximum EIRP Power: 5dBm
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity/ The device complies with RF specifications when the device used at 0mm from your body.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Marking Information
Model: Cube-C RX Input: 5 V 200mA(Max.) Li-ion Battery:3.8V , 200mAh,0.76Wh Made in China IC: 20034-132 FCC ID: 2ABYN132 CAN ICES-003(B)/NMB-003(B)
219-247155
R-R-gdx-016
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information Customer Information
Model Name Address
Product Code Number Contact Number
Seller Information
Name Contact Number Address
Note
Date of Sale
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,and the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modified, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Name Type
Parts Product Main Body
Maintenance Warranty Service Type Period(month)
12
Customer sends the product
to designated site
Battery
3
Customer sends the product
to designated site
Charger, Electrical Parts etc. 12
Customer sends the product to designated site
Other Items
Battery Case, Windscreen
No
Foam, Wind Cap, Locking
Device, Lanyard, Tie, Velcro
Tape, Clip, Bag, Package etc.
Without warranty
Godox After-sale Service Call 0755-29609320-8062