User Guide for PD-USB-DP60 PoE to USB-C Power and Data Adapter models including: PD-USB-DP60, PoE to USB-C Power and Data Adapter
PD-USB-DP30 Quick Start Guide. LED Indicators LED Appearance Status Power No Light PD-USB-DP30 is: powered off or powered on as a dongle Yellow On PD-USB-DP30 is powered on Link/ Act No Light No data link Green On Data link on Green Blinking Data activity on. Specifications Data • PoE IN • 10/100/1000 Mbps • USB Type-C • USB 2.0
PD-USB-DP30 Quick Start Guide. LED Indicators LED Appearance Status Power No Light PD-USB-DP30 is: powered off or powered on as a dongle Yellow On PD-USB-DP30 is ...
PD-USB-DP60 Quick Start Guide 1. Connect an IEEE® 802.3af/at/bt-compliant PSE to the PD-USB-DP60's "PoE IN" RJ45 socket using a standard Cat 5/5e/6 Ethernet cable. (Note: The maximum allowed length of the Ethernet cable is 100 meters). 3. Connect one side of the supplied USB Type-C® cable to the PD-USB-DP60's USB-C socket. (Note: Any USB-C connection polarity is allowed.) PoE IN 2. Check that the "Power" LED is yellow to verify that the PD-USB-DP60 is powered on. USB-C® 4. Connect the other side of the USB Type-C cable to the USB-C powered device. 5. Verify that the USB-C powered device is getting power from the PD-USB-DP60. microchip.com Ethernet-to-USB-C Data Dongle If PoE power isn't available, and wired Etherent is required, the PD-USB-DP60 can be powered from a USB Host: 1. Connect one side of the supplied USB Type-C cable to the USB-C host. 2. Connect the other side of the USB Type-C cable to the PD-USB-DP60's USB-C socket. 3. Connect a standard Cat 5/5e/6 Ethernet cable the PD-USB-DP60's "PoE IN" RJ45 socket to connect to an IEEE 802.3 10/100/1000 Mbps network. LED Indicators LED Appearance Status Power Link/ Act No Light PD-USB-DP60 is: powered off or powered on as a dongle Yellow On PD-USB-DP60 is powered on No Light No data link Green On Data link on Green Blinking Data activity on Specifications Data · PoE IN · 10/100/1000 Mbps · USB Type-C · USB 2.0 · USB 3.1 Gen 1 Power · PoE IN · Input Voltage: 42-57 VDC · Input Current: 1.75A max · USB Type-C · 5 VDC/3A · 9 VDC/3A · 15 VDC/3A · 20 VDC/3A Environmental Information: · Operating Temperature: 0°C to 40°C (32°F to 104°F) · Operating Humidity: 90% Max (non-condensing) · Storage Temperature: -20°C to +70°C (-4°F to +158°F) · Storage Humidity: 95% Max (non-condensing) · Dimensions: 22.4 mm (H) x 66.8 mm (W) x 105.2 mm (L) · Weight: 150g Notes · If the USB host is running the Windows® operating system, the device driver should be automat- ically installed (plug and play) after the PD-USB-DP60 is connected. Linux® may require driver installation in case the LAN7800 Ethernet controller is missing. Apple® requires driver installation. · If the USB host doesnt recognize the PD-USB-DP60 as a USB device, please go to the LAN7800 product page to download and install the appropriate device driver. · Powering multiple PD-USB-DP60 from the same PoE multiport midspan may affect data/power per- formance to connected USB-C devices (i.e. laptop) if they are sharing common peripheral equipment such as monitors, projectors, etc. Technical Support For technical support please visit the Microchip Technical Support Portal www.microchip.com/support LAN7800 Driver To download device drivers for the LAN7800 please visit the LAN7800 WEB page: LAN7800 USA/Canada: +1 877 480 2323 The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2021, Microchip Technology Incorporated. All Rights Reserved. 7/21 DS00003800BAdobe PDF Library 15.0 Adobe InDesign 16.0 (Macintosh)