365Cam HD WiFi Camera Instruction Manual

Introduction

Thank you for purchasing this product. Please read this manual carefully before use and keep it in a safe place.

Client Download

Scan the QR code below to download and install the "365cam" APP, or search "365Cam" in your cell phone manufacturer's app store to download and install. Ensure all permissions are allowed.

[QR code for 365Cam APP download]

Available on:

[Android App Store icon], [Google Play icon], [iOS App Store icon]

Connection Methods

Connection Method One: Remote WIFI Connection

1. Open the "365cam" APP (allow Bluetooth access) and click the page to start binding.

[Screenshot of the 365Cam app showing a list of devices, with a detected camera identified as DGOC-02918-HNLLL]

2. Configure WIFI: Select your home WiFi name and enter the WiFi password. Click "Configure WIFI".

[Screenshot of the 365Cam app's WiFi configuration screen, showing fields for WiFi name and password]

3. After configuring WiFi, the camera's red indicator light will remain solid, indicating a successful connection to the remote WiFi.

[Screenshot of the 365Cam app showing a device list with a camera successfully connected to remote WiFi]

4. Click to view the camera feed.

[Screenshot of the 365Cam app showing the live video feed from the camera]

Connection Method Two: No Network Connection (Direct Connection)

1. Mobile phone direct camera connection: Go to your phone's wireless settings and connect to the hotspot starting with "DG" (e.g., DGOC-02918-HNLLL). After connecting, return to the app.

[Screenshot of a mobile phone's WiFi settings menu, displaying available networks including "DGOC-02918-HNLLL" and a home WiFi network]

2. Go to your phone's WiFi settings and select the camera's WiFi hotspot (e.g., DGOC-02918-HNLLL). Connect to it. If a prompt appears, select "Trust Network" and maintain the connection.

[Screenshot of a mobile phone's WiFi settings menu, showing the camera's hotspot "DGOC-02918-HNLLL" as connected]

3. After connecting to the camera, return to the APP and refresh the page. The device appearing indicates successful proximity mode connection. (This connection method is limited to within 10 meters).

[Screenshot of the 365Cam app showing a device list with a camera successfully connected via proximity mode]

Product Buttons and Indicator Lights

MODE/RESET Button: Press and hold for 5 seconds to restore factory settings and disconnect the connected network.

Charging Indicator (Blue): Solid blue light when charging, turns off when fully charged.

Work Indicator (Red): Flashing or solid light indicates the device is powered on.

Network Indicator (Red):

1. Slow flash: AP hotspot mode (no network).
2. Solid light: Device connected to WiFi successfully.
3. Fast flash: Device connection failed, or WiFi password input error.

Note: If the camera's working status is unknown, reset the camera to factory settings by pressing and holding the reset button for over 5 seconds. After the camera restarts, it will enter AP hotspot mode.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.