Easee Ready / Plug & Play EV Charging Stations

Easee Ready: Easy to Scale

Benefits

• EV ready charge point at low cost
• Supports the expansion of multiple charging stations on the same cable
• Suitable for both Easee Home and Easee Charge
• Developed and manufactured in Norway

Easee Plug & Play: Key Features

• Full of Power: 22kW charging capacity, Type 2 connector for all EV types.
• Internet Access: Built-in eSIM for mobile network connectivity, enabling software updates and remote management. Local WiFi network recommended for enhanced redundancy.
• Quick Charge: Up to 10x faster than a regular outlet (requires 3-phase installation for maximum speed).
• Always Updated: Continuous software updates ensure a safe and future-proof product.
• Compact Design: 69% smaller and lighter than other EV chargers, weighing only 1.5 kg, contributing to environmental sustainability by saving materials.
• Warranty: A 3-year warranty provides confidence in product quality.
• Colourful Choice: Available in five colours: White, Anthracite, Red, Blue, and Black.

Made in Norway for Harsh Conditions

Easee products are developed and manufactured in Norway, designed to withstand harsh environments. They are robust, compact, and made with high-quality components. The charger is IP54 certified, suitable for both indoor and outdoor installation, and designed to endure the Norwegian climate. This commitment to quality is backed by a 3-year warranty.

Feel Safe with Advanced Security

The charging robots feature 3 extra levels of security for peace of mind. This includes built-in electronic earth fault protection (detecting DC and ground faults), temperature sensors to prevent overheating, and the ability to permanently lock the charging cable via the app or local WiFi interface to deter theft.

Easee Ready

Measurement (mm)

Height: 256 mm, Width: 193 mm, Depth: 78 mm

General

• Dimension (mm): H: 256 x W: 193 x D: 78
• Wall mounting (mm): c/c H: 160 x W: 125
• Colour: Black
• Installation kit included

Wire Terminals

• Wire cross-section: up to 16 mm² (single cable) / up to 10 mm² (parallel connection)
• Cable diameter: 8–22 mm
• Terminal torque: 5 Nm
• Cable strip length: 12 mm

Installation

• Installation network: TN, IT or TT
• Installation circuit breaker: Max 40 A (Easee Home) or max 80 A (Easee Charge) overload protection.

Protection

• Degree of protection: IP44
• Impact resistance: IK10

Easee Ready Contains

• Backplate
• Blind cover

Easee Plug & Play

Measurement (mm) (complete charger measurements)

Height: 256 mm, Width: 193 mm, Depth: 106 mm

General

• Dimension (mm): H: 256 x W: 193 x D: 106
• Operating temperature: -30 °C to +50 °C
• Weight: 1.5 kg

Connectivity

• Built-in eSIM (LTE Cat M1/ 2G /GPRS)
• WiFi 2.4 GHz b/g/n connection
• Easee Link RFTM
• Control charging with the Easee app
• RFID/NFC reader
• OCPP 1.6 via our API

Charging

• Charging power: 1.4–22 kW
• 6 A 1 phase – 32 A 3 phase (automatically adjusted in relation to available capacity)
• Up to 7.36 kW at 32 A 1 phase
• Up to 22 kW at 32A 3 phase
• Number of phases: 1 or 3 (fully dynamic)
• Connection point: Type-2 socket (IEC 62196-2)
• Voltage: 3 x 230 / 400 V AC (±10%)
• Mains frequency: 50/60 Hz
• Up to 3 (Easee Home) or 101 (Easee Charge) Charging Robots on the same circuit
• Load and phase balancing works offline
• Built-in energy meter (±2 %)

Sensors and Indicators

• Light strip showing the status of the charger
• Touch button for manual adjustment
• Temperature sensors in all main contacts

Colours

White, Anthracite, Red, Blue, Black

Protection Features

• Integrated overload protection according to EN IEC 61851-1:2019
• Built-in RCD for ground fault protection (30 mA AC/ 6 mA DC) according to EN 61008-1 and IEC 62955
• Degree of protection: IP54 (the backplate is IP22 without cover)
• Impact resistance: IK10
• Insulation class: I
• Overvoltage category III

Regulatory Compliance

Complies with the following regulations:

• 2014/53/EU (RED)
• 2011/65/EU (RoHS)
• 2014/30/EU (EMC)
• 2014/35/EU (LVD)

See DoC for details at easee.support.

Theft Protection

Electronics can be deactivated and tracked in case of theft (contact support if your device has been stolen). The electronics can be permanently locked using a padlock (not included). The charging cable can be locked permanently in the charging station.