Link: The wallet designed for the internet
CE Regulatory Compliance | TP-LinkRegulatory Compliance | TP-LinkTP-Link: Your Smart Home, Simplified
Instruction Manual for tp-link models including: EAP110-Outdoor, EAP113-Outdoor, EAP225-Outdoor, EAP610-Outdoor, EAP623-Outdoor HD, EAP625-Outdoor HD, EAP650-Outdoor, EAP668-Outdoor HD, EAP772Outdoor, EAP650 D30-Outdoor, EAP650 D120-Outdoor, EAP115-Bridge, EAP211-Bridge, EAP215-Bridge, EAP110 Omada Indoor Outdoor Access Point, EAP110, Omada Indoor Outdoor Access Point, Indoor Outdoor Access Point, Outdoor Access Point, Access Point
TP-Link Systems Inc. EAP668ODHD AX3600 Indoor/Outdoor Wi-Fi 6 Access Point 2BH7FEAP668ODHD 2BH7FEAP668ODHD eap668odhd
File Info : application/pdf, 17 Pages, 856.90KB
DocumentDocumentRegulatory Compliance
Indoor/Outdoor EAP
© 2025 TP-Link 1910013244 REV1.6.0
For Class B EAP with adapter:
FCC Compliance Information Statement
Product Name: Omada Indoor/Outdoor Access Point
Model Number: EAP110-Outdoor / EAP113-Outdoor / EAP225-Outdoor / EAP610-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor / EAP668-Outdoor HD / EAP772Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor / EAP115-Bridge / EAP211-Bridge / EAP215-Bridge
Component Name
Model
I.T.E. Power Supply
T240025-2-POE (EAP110-Outdoor) T240050-2-POE (for EAP225-Outdoor, EAP115-Bridge / EAP211-Bridge / EAP215-Bridge) T480050-2-POE (for EAP610-Outdoor) T480038-2-POE (for EAP650-Outdoor)
Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 30cm (for EAP668-Outdoor HD) / 25cm (for EAP610-Outdoor) / 20cm (for other models) from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter."
For EAP772-Outdoor: · The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft. · Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
Product Name: I.T.E. Power Supply Model Number: T240025-2-POE / T240050-2-POE / T480050-2-POE / T480038-2-POE Responsible party: TP-Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2025-04-01
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
For EAP110-Outdoor / EAP113-Outdoor: 2412MHz--2472MHz (20dBm) For EAP225-Outdoor / EAP610-Outdoor / EAP623-Outdoor HD / EAP650-Outdoor: 2412MHz--2472MHz (20dBm) 5150MHz--5250MHz (23dBm)
5250MHz--5350MHz (23dBm) 5470MHz--5725MHz (30dBm) For EAP625-Outdoor HD / EAP668-Outdoor HD / EAP650 D30-Outdoor / EAP650 D120Outdoor: 2402 MHz-2480 MHz (10dBm) 2412MHz--2472MHz (20dBm) 5150MHz--5250MHz (23dBm) 5250MHz--5350MHz (23dBm) 5470MHz--5725MHz (30dBm) For EAP772-Outdoor: 2402 MHz-2480 MHz (10dBm) 2412MHz--2472MHz (20dBm) 5150MHz--5250MHz (23dBm) 5250MHz--5350MHz (23dBm) 5470MHz--5725MHz (30dBm) 5945MHz -6425 MHz (23dBm) For EAP115-Bridge / EAP211-Bridge / EAP215-Bridge: 5150MHz--5250MHz (23dBm) 5250MHz--5350MHz (23dBm) 5470MHz--5725MHz (30dBm)
EU Declaration of Conformity
For EAP110-Outdoor / EAP225-Outdoor / EAP610-Outdoor / EAP650-Outdoor / EAP115-Bridge / EAP211-Bridge / EAP215-Bridge: TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. For EAP113-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP668-Outdoor HD / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor: TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20cm from your body.
National Restrictions
For EAP225-Outdoor / EAP610-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor / EAP668-Outdoor HD / EAP650 D30-Outdoor / EAP650 D120-Outdoor / EAP115-Bridge / EAP211-Bridge / EAP215-Bridge:
Frequency band: 5150 - 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band.
Frequency band: 5250 - 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.
Frequency band: 5470 - 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.
For EAP772-Outdoor:
Frequency band: 5150 - 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band.
Frequency band: 5250 - 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.
Frequency band: 5470 - 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.
Frequency band: 5945 -6425MHz:
Restricted to indoor use, including in trains with metal-coated windows and aircraft. Outdoor use, including in road vehicles, is not permitted
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
National Restrictions
For EAP225-Outdoor / EAP610-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor / EAP668-Outdoor HD / EAP650 D30-Outdoor / EAP650 D120Outdoor / EAP115-Bridge / EAP211-Bridge / EAP215-Bridge: Attention: In Great Britain, the operation in the frequency range 5150MHz - 5350MHz is only permitted indoors. For EAP772-Outdoor: Attention: In Great Britain, the operation in the frequency range 5150MHz - 5350MHz, 5945 -6425MHz is only permitted indoors.
UK
Canadian Compliance Statement
For EAP110-Outdoor / EAP225-Outdoor / EAP610-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor / EAP668-Outdoor HD / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor / EAP215-Bridge: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Pour EAP110-Outdoor / EAP225-Outdoor / EAP610-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor / EAP668-Outdoor HD / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor / EAP215-Bridge: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage;
2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
For EAP110-Outdoor:
This radio transmitter (IC: 8853A-EAP110OD / Model: EAP110-Outdoor) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 8853A-EAP110OD / Model: EAP110-Outdoor) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste ci-dessous et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Antenna Two 2.4GHz 3dBi external omnidirectional antennas
For EAP225-Outdoor:
This radio transmitter (IC: 26583-EAP225ODV3 / Model: EAP225-Outdoor) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 8853A-EAP225OD / Model: EAP225-Outdoor) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste ci-dessous et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Antenna
Two 2.4GHz 3dBi external omnidirectional antennas Two 5GHz 4dBi external omnidirectional antennas
For EAP625-Outdoor HD:
This radio transmitter (IC: 31152-EAP625ODHD / Model: EAP625-Outdoor HD) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 31152-EAP625ODHD / Model: EAP625-Outdoor HD) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste ci-dessous et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Antenna
Two 2.4GHz 3dBi external omnidirectional antennas Two 5GHz 5dBi external omnidirectional antennas
For EAP668-Outdoor HD:
This radio transmitter (IC: 32876-EAP688ODHD / Model: EAP668-Outdoor HD) has been approved by Industry Canada to operate with the antenna types listed below with the maximum
permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 32876-EAP688ODHD / Model: EAP668-Outdoor HD) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste ci-dessous et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Antenna
Four 2.4GHz 6dBi external omnidirectional antennas Four 5GHz 6dBi external omnidirectional antennas
Caution
Professional installation instruction
(For EAP115-Bridge / EAP211-Bridge / EAP215-Bridge / EAP225-Outdoor / EAP610-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor / EAP668-Outdoor HD / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor)
1. Installation personnel
This product is designed for specific application and needs to be installed by a qualified trained person who has RF and related rule knowledge. This product needs to be professionally configured by SDN Controller network service before use.
2. Professional Installation Requirements
· This device is generally for industrial/commercial use, which only sold to authorized dealers or installers.
· During the installation process, it is necessary to ensure that the equipment is perpendicular to the ground.
· Operation in the 5150-5250MHz is restricted to indoor use only.
· Operation in the 5600-5650MHz band is prohibited.
Instructions d'installation pour les professionnels
(Pour EAP115-Bridge / EAP211-Bridge / EAP215-Bridge / EAP225-Outdoor / EAP610Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor / EAP668-Outdoor HD / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor)
1. Personnel d'installation
Ce produit est conçu pour une application spécifique et doit être installé par une personne qualifiée et formée, possédant des connaissances en RF et en règles associées. Ce produit doit être configuré par des professionnels via le service réseau SDN Controller avant utilisation.
2. Exigences d'installation à l'attention des professionnels
· Cet appareil est généralement destiné à un usage industriel/commercial, vendu uniquement à des revendeurs ou installateurs agréés.
· Pendant le processus d'installation, il est nécessaire de s'assurer que l'équipement est perpendiculaire au sol.
· Le fonctionnement dans la bande 5150-5250 MHz est limité à une utilisation en intérieur uniquement.
· Le fonctionnement dans la bande 5600-5650 MHz est interdit.
For EAP225-Outdoor / EAP610-Outdoor / EAP115-Bridge / EAP211-Bridge / EAP215-Bridge:
1) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.
For EAP623-Outdoor HD / EAP650-Outdoor / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor:
1) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.
DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 54705600MHz, and 5650-5725MHz.
For EAP625-Outdoor HD / EAP668-Outdoor HD:
1) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.
2) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
3) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 54705600MHz, and 5650-5725MHz.
Avertissement
Pour EAP225-Outdoor / EAP610-Outdoor / EAP115-Bridge / EAP211-Bridge / EAP215Bridge:
1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
Pour EAP623-Outdoor HD / EAP650-Outdoor / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor:
1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
Les produits utilisant la technique d'atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz.
Pour EAP625-Outdoor HD / EAP668-Outdoor HD:
1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
2) Le gain maximal d'antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limitation P.I.R.E.;
3) Le gain maximal d'antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l'exploitation point à point et non point à point, selon le cas.
Les produits utilisant la technique d'atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz.
For EAP772-Outdoor:
· Devices shall not be used for control of or communications with unmanned aircraft systems.
· Devices shall not be used on oil platforms, aircraft, automobiles, trains, maritime vessels.
· The antenna is fixed and inside the product, antenna height is equal to product height, which is determined by installers. This information shall be stored internally in the device. Provision of accurate device information is mandatory.
Antenna Type Alford Dipole Franklin IFA IFA
Model 3101507199 3101507197, 3101507198 3101507195, 3101507196 EAP772OD-BLE-ANT EAP772OD-GPS-ANT
Pour EAP772-Outdoor:
· Les appareils ne doivent pas être utilisés pour contrôler ou communiquer avec des systèmes d'aéronefs sans pilote.
· Les appareils ne doivent pas être utilisés sur des plates-formes pétrolières, des avions, des automobiles, des trains, des navires.
· L'antenne est fixe et à l'intérieur du produit, la hauteur de l'antenne est égale à la hauteur du produit, qui est déterminée par les installateurs. Ces informations doivent être stockées en interne dans l'appareil. La fourniture d'informations précises sur l'appareil est obligatoire.
Type d'antenne Alford Dipole Franklin IFA
Modèle 3101507199 3101507197, 3101507198 3101507195, 3101507196 EAP772OD-BLE-ANT
IFA
EAP772OD-GPS-ANT
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm (for EAP668-Outdoor HD) / 26cm (for EAP772-Outdoor) / 25cm (for EAP610-Outdoor) / 22cm (for EAP625-Outdoor HD) / 20cm (for other models) between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 30cm (pour EAP668-Outdoor HD) / 26cm (pour EAP772-Outdoor) / 25cm (pour EAP610Outdoor) / 22cm (pour EAP625-Outdoor HD) / 20cm (pour les autres modèles) de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
.
NCC Notice & BSMI Notice
EAP115-Bridge / EAP211-Bridge / EAP215-Bridge / EAP610-Outdoor / EAP623Outdoor HD / EAP650-Outdoor / EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120Outdoor EAP225-Outdoor / EAP625-Outdoor HD
. . ( ) 40
Pb
Cd
Hg
CrVI
PBB
PBDE
PCB
--
1. "0.1 wt %" "0.01 wt %" . 2."". 3."--" .
, .
Safety Information
Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
(For models with adapters) Adapter should be used indoors where the ambient temperature is lower than or equal to 40 .
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed
(For models with adapters) Adapter shall be installed near the equipment and shall be easily accessible.
(For models with adapters) Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us.
Operating Temperature:
EAP113-Outdoor: -30 ~ 65 (-22 ~ 149 )
EAP115-Bridge / EAP211-Bridge / EAP215-Bridge / EAP668-Outdoor HD:
-40 ~ 70 (-40 ~ 158 ) For others: -30 ~ 70 (-22 ~ 158 )
This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.
I.T.E.
Symbol
Explanation
Class II equipment Class II equipment with functional earthing Alternating current Direct current Polarity of d.c. power connector For indoor use only
Dangerous voltage
Caution, risk of electric shock
Energy efficiency Marking
Protective earth Earth Frame or chassis Functional earthing Caution, hot surface Caution Operator's manual
Stand-by
"ON"/"OFF" (push-push) ""/""
Fuse
Fuse is used in neutral N N
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 2012/19/EU WEEE
Caution, avoid listening at high volume levels for long periods
Disconnection, all power plugs
Switch of mini-gap construction m
Switch of micro-gap construction (for US version)
Switch of micro-gap / micro-disconnection construction (for other
µ
versions except US)
US
/ US
Switch without contact gap (Semiconductor switching device)
Mounting Requirements
For safety, we recommend you to use the original screws in the package when mounting. The following are alternatives to mount the device on the wall:
· (For EAP610-Outdoor / EAP623-Outdoor HD / EAP625-Outdoor HD / EAP650-Outdoor) Use 2 screws which comply with ANSI B1.1 4#, (5#), 6# standard and are longer than 7 mm.
· (For EAP772-Outdoor / EAP650 D30-Outdoor / EAP650 D120-Outdoor) Use 4 screws which comply with ANSI B1.1 4#, (5#), 6# standard and are longer than 7 mm.
· (For EAP668-Outdoor HD) Use 2 expansion screws which comply with ANSI B1.1 standard with a diameter of 3/8 or 7/16 inches and are longer than 60 mm.