Smart Life Z4 Smart Camera User Manual

Basic Parameters

• Product Name: Smart Camera
• Pixel: 2.0Mp/3.0MP
• Video Compression: H.264 H.265 High Profile
• Image Enhancement: Digital Wide Dynamic 3D Noise Reduction
• Local Storage: MicroTF card
• Wireless Encryption: WEP/WPA/WPA2 Encryption
• Power Input: 5V 1A (Min)
• Total Power Consumption: 5W (Max)
• Wireless Standard: 2.4G 802.11 b/g/n
• Support Platform: Android/iOS

Component Description

Reset Button: Long press the "reset" hole for 5 seconds for a successful reset.

It is recommended to insert an 8-128GB high-speed Micro TF card for storage, viewing historical video, and supporting important functions such as firmware upgrading. Without it, these functions may not be available.

Packing List: Smart Camera x 1, Manual x 1, USB Power Cord x 1, Power Adapter x 1, Screw Accessories Package x 1.

Installation and Setup

Install the Smart Life APP

Download the "Smart Life" APP by scanning the QR code provided. Register and log in to the app according to the on-screen prompts.

Add Device - Scan QR Code Mode

Follow these steps to add your camera:

1. Ensure your Wi-Fi network is available and connected to the Internet.
2. Connect the camera to power. Wait for the system startup to complete.
3. Open the "Smart Life" APP. Press the [add icon] '+' in the upper right corner of the main screen.
4. Select "Security & Video Surveillance", then click "Smart Camera".
5. Click "Next step" to begin adding the camera.

A QR code will appear on your screen. Position the camera approximately 20-30 cm away from the mobile phone lens to scan the QR code. Once scanned, click "Hear the prompt sound". The app will then show "connecting".

Note: Ensure the device is reset first. The indicator light should be flashing quickly, or a prompt tone should be heard before proceeding.

Add Device - Wi-Fi Fast Connection Mode (AP Mode)

This mode is an alternative method for connecting your device.

1. Select "AP Mode" from the connection options.
2. Click "Next".
3. Enter your Wi-Fi account and password for a network that the device can connect to.
4. Click to complete the connection.

Important Note: Only 2.4 GHz Wi-Fi networks are supported. If your mobile phone is not connected to Wi-Fi, follow the prompts to connect it. The app will guide you through selecting the 2.4 GHz Wi-Fi network and entering the password.

Connection Completion

After successful connection, click "Done". You will then be taken to the preview interface. Closing the preview interface returns you to the APP home page, where your connected device will be listed. You can click on the device to view the monitoring situation directly.

Matters Need Attention

• Try to keep the camera away from metal spaces.
• Avoid placing it near furniture or microwave ovens that might block signals.
• Ensure adequate space around the camera, avoiding areas where audio, video, and data lines are wound.
• Position the camera as close as possible to the Wi-Fi signal coverage area.
• If switching network environments or experiencing issues, press the reset hole for about 5 seconds to reconnect to the network.

Harmful Substances Information

The name and content of harmful substances in the product:

This form is based on the provisions of SJ/T 11364.

This product conforms to RoHS environmental protection requirements. Currently, there is no mature technology globally to replace or reduce the lead content in electronic ceramics, porcelain, optical glass, steel, and copper alloys.

Regulatory Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.