STRONG Powerline Wi-Fi 600 Kit

Product Overview

The STRONG Powerline Wi-Fi 600 Kit uses your home's electrical wiring to transmit network data, allowing you to extend your internet connection to any room without running new cables. It also provides Wi-Fi connectivity, turning any power outlet into a potential Wi-Fi access point.

This kit includes two Powerline adapters. One adapter connects to your router and a power outlet, while the second adapter connects to a power outlet in another room to provide network access and Wi-Fi.

Installation Instructions

Follow these steps to set up your Powerline Wi-Fi 600 Kit:

1. Connect the first Powerline adapter:

   Plug one Powerline adapter into a wall socket ?. Connect this adapter to your router using an Ethernet cable. Ensure the adapter is plugged directly into the wall socket, not into a power strip or surge protector, to ensure optimal performance.

   Diagram Description: A Powerline adapter is plugged into a wall socket and connected via an Ethernet cable to a router labeled "INTERNET" ?.

2. Connect the second Powerline adapter:

   Plug the second Powerline adapter into a wall socket in the room where you want to extend your network or create a Wi-Fi hotspot ?. This adapter will automatically establish a connection with the first adapter.

   Diagram Description: A second Powerline adapter is plugged into a different wall socket in another room.

3. Connect devices:

   You can now connect devices to the network:

   • Via Ethernet: Use an Ethernet cable to connect devices (like computers, game consoles, or smart TVs) to the Ethernet port on the second Powerline adapter.
   • Via Wi-Fi: Connect wirelessly to the Wi-Fi network broadcast by the second Powerline adapter.

   Diagram Description: Shows the second Powerline adapter providing Wi-Fi connectivity ? and having an Ethernet port for wired connections.

Default Access and Wi-Fi Information

After setup, the Powerline adapters will establish a connection. The second adapter will broadcast a Wi-Fi network ?.

Default Wi-Fi Network Name (SSID): STRONG_xxxx_2.4GHz

Default Wi-Fi Password: XXXXXXXXX (This password is often printed on the device label or can be found in the product's documentation. For security, it is recommended to change this after initial setup.)

Web Interface Access:

To configure advanced settings, access the web interface by typing the following address into a web browser on a connected device:

URL: http://strong.500.ap

Default Login:

Username: admin

Password: admin

Diagram Description: A notepad shows default access details: URL http://strong.500.ap, IP Address 192.168.1.254, Password admin, Wi-Fi Network STRONG_xxxx_2.4Ghz, Wi-Fi PWD XXXXXXXXX.

Product Specifications

Model: POWERLWF600DUOEU (Powerline Wi-Fi 600)

Input Voltage: 100 ~ 240 V, 50/60 Hz

Power Consumption: 0.15 A (for product)

Wi-Fi Speed: Up to 600 Mbit/s

Manufacturer: STRONG AUSTRIA

Represented by: STRONG Ges.m.b.H

Address: Teinfaltstraße 8/4.Stock, A-1010 Vienna, Austria

Country of Origin: Made in China

Support and Further Information

For additional support, troubleshooting, or to learn more about Powerline Network security, please visit the FAQ section for Powerline products on the official STRONG website.

Website: www.strong.tv