Installation Manual-MEAN WELL Switching Power Supply ManufacturerProduct Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: ENP-360 Desktop Type Power Supply, ENP-360, Desktop Type Power Supply, Type Power Supply, Power Supply, Supply
File Info : application/pdf, 4 Pages, 120.25KB
DocumentDocument360W Level Desktop Type Power Supply ENP-360 series Front User's Manual Back (Only for 12V) UL62368-1 TPTC004 IEC62368-1 Features Universal AC input / Full range Built-in active PFC function Energy efficiency Level No load power consumption <0.5W Comply with EISA 2007/DoE, NRCan and EU ErP 125% peak load capability Fanless design, cooling by free air convection Protection: Short circuit / Overload / Over voltage / Over temperature 3 years warranty Applications Land mobile radio system Surveillance system TV antenna facility GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx Description ENP-360 series is a 360W desktop type power supply working perfectly for communication related applications. Observing the standard 7 width size in the land mobile radio field, it provides the most frequently used voltage in the communication field. With the rugged mechanical design along with the high efficiency circuitry, it operates for the ambient temperature range -30~+70 under free air convection. Model Encoding ENP - 360 - 24 Nominal voltage Rated wattage Series name File Name:ENP-360-SPEC 2024-01-12 360W Level Desktop Type Power Supply ENP-360 series SPECIFICATION MODEL ENP-360-12 ENP-360-24 ENP-360-48 DC VOLTAGE 13.8V 27.6V 55.2V RATED CURRENT 26A 13A 6.5A RATED 0 ~ 26A CURRENT PEAK Note.2 32.6A 0 ~ 13A 16.3A 0 ~ 6.5A 8.2A RATED 359W WATTAGE PEAK Note.2 450W 359W 450W 359W 453W OUTPUT RIPPLE & NOISE (max.) Note.3 150mVp-p 150mVp-p 350mVp-p VOLTAGE ADJ. RANGE 11.5 ~ 15V 23.5 ~ 30V 47.5 ~ 57V VOLTAGE TOLERANCE Note.4 ±1.0% LINE REGULATION Note.5 ±0.5% ±1.0% ±0.5% ±1.0% ±0.5% LOAD REGULATION Note.6 ±2.0% ±1.0% ±0.5% SETUP, RISE TIME Note.7 1000ms, 100ms at full load HOLD UP TIME (Typ.) 20ms at full load VOLTAGE RANGE Note.8 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC at full load EFFICIENCY (Typ.) 91% 93% 94% INPUT AC CURRENT (Typ.) 3.8A/115VAC 1.9A/230VAC INRUSH CURRENT (Typ.) COLD START 60A at 230VAC LEAKAGE CURRENT <3.5mA / 240VAC NO LOAD POWER CONSUMPTION <0.5W SHORT CIRCUIT Protection type : Constant current limiting, recovers automatically after fault condition is removed OVERLOAD Normally works within 110 ~ 125% rated output power for more than 3 seconds and switches to constant current limiting, with auto-recovery after the peak load condition is removed PROTECTION OVER VOLTAGE Constant current limiting, if >125% rated power, with auto-recovery after the overload condition is removed 15.5 ~ 18.2V 31 ~ 36.5V 62.1 ~ 72.9V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE WORKING TEMP. Shut down O/P voltage, recovers automatically after temperature goes down -30 ~ +70 (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 95% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT ±0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS IEC62368-1, UL62368-1, EAC TP TC 004, J62368-1(2020)(Only for 12V) approved; Meet BS EN/EN62368-1 WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted BS EN/EN55032 (CISPR32) / FCC PART15 (CISPR22) Class B EMC EMISSION Radiated BS EN/EN55032 (CISPR32) / FCC PART15 (CISPR22) Class B Harmonic Current BS EN/EN61000-3-2 ----- SAFETY & EMC (Note 9) Voltage Flicker BS EN/EN61000-3-3 BS EN/EN55035; J55032(H29) (Only for 12V) Parameter Standard ----Test Level / Note ESD BS EN/EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated BS EN/EN61000-4-3 Level 2, 3V/m EMC IMMUNITY EFT / Burst Surge BS EN/EN61000-4-4 BS EN/EN61000-4-5 Level 2, 1KV Level 2, 1KV/Line-Line,Level 3, 2KV/Line-Earth Conducted BS EN/EN61000-4-6 Level 2, 3Vrms Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods MTBF 1199.8K hrs min. Telcordia SR-332 (Bellcore) ; 147.5K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 192*178*45.5mm (L*W*H) PACKING 1.5Kg; 10pcs/16Kg /1.38CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Peak current or peak power up to 3 seconds is provided. 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. Line regulation is measured from low line to high line at rated load. 6. Load regulation is measured from 0% to 100% rated load. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 8. Derating may be needed under low input voltages. Please check the derating curve for more details. 9. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 10. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:ENP-360-SPEC 2024-01-12 360W Level Desktop Type Power Supply Block Diagram ENP-360 series EMI FILTER I/P & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER +V -V O.L.P. CONSTANT CURRENT LIMITING & FG DETECTION PWM PFC CONTROL CIRCUIT CONTROL O.V.P. Derating Curve Static Characteristics 100 80 60 40 20 -30 0 10 20 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 90 100 115 120 140 160 180 190 200 220 240 264 INPUT VOLTAGE (V) 60Hz LOAD (%) LOAD (%) File Name:ENP-360-SPEC 2024-01-12 360W Level Desktop Type Power Supply Mechanical Specification ENP-360 series Case No. 252 Unit:mm TB1 1 2 3 4 VR 192 47.5 2-M3 L=5 50 45.5 4.3 LED 178 78 INLET SWITCH Terminal Pin No. Assignment (TB1): Pin No. Assignment 1,2 +V 3,4 -V Note: Please use wires with a cross section of 0.5 - 4.0 mm2 (12~20AWG) for connection. Recommended wires strip length is 9 mm and screw torque is 4.0 lb-inch (0.4~0.5Nm). Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:ENP-360-SPEC 2024-01-12