M5 Bluetooth Remote User Manual

Product Introduction

• Compatible with Bluetooth 4.0
• Infrared and wireless Bluetooth control
• Mouse control function (virtual mouse)

Product Picture

A black remote control is shown. It features a power button (red), a home button (blue), a menu button (blue), volume up and down buttons (blue), an OK button, directional buttons (up, down, left, right), a back button, and a PG button.

Parameter

Code Value

The remote control is shown with various buttons labeled with numerical codes. For example, the power button is labeled '40', the home button '11', the menu button '16', the OK button '13', and the back button '19'.

Customer code: 01 FE

Format: 6121

Bluetooth Version

The remote features Bluetooth connectivity with a transmission distance of over 10 meters and supports mouse control.

Battery type: 2 AAA batteries (not included)

Product size: 135*40*10mm

Product weight: approximately 41g (manual detection, there may be a slight error)

Functional Operating

Basic Functions:

• Bluetooth button function
• Mouse control function (virtual mouse)
• Infrared button function

Connecting:

Open System Settings, Bluetooth, search for device "HID Remote01", Connect.

LED Indications

1. When not connected: The red light flashes slowly. Press any button and the red light flashes 3 times in a row.
2. When connecting: Press the button once, the red light flashes, and then stays solid.
3. When the power is low: The red light flashes quickly.

Standby

1. When not connected: Enters sleep mode after 60 seconds.
2. When connected: Enters hibernation after 15 minutes of inactivity.

Low Power Indication

When the battery is below 2.4V, a red light flashes to indicate low battery.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.