Jelly Comb K46B-2 Wireless Keyboard

Keyboard Overview

The keyboard features a standard layout with function keys, navigation keys, and dedicated Bluetooth pairing buttons.

Key elements include:

• Fn key: Used in combination with other keys for special functions.
• Ctrl, Alt, Win keys: Standard modifier keys.
• Bluetooth Pairing Buttons (1, 2, 3): Allow connection to up to three different devices.
• Caps Lock indicator: Shows the status of the Caps Lock key.
• Power Switch: Located on the keyboard to turn it on or off.
• Connection Status LEDs: Indicate the active Bluetooth channel and pairing status.

Connecting via Bluetooth

To connect your keyboard to a device via Bluetooth:

1. Turn on the keyboard using the power switch.
2. Press and hold the desired channel button (e.g., Fn + 1) for approximately 3 seconds until the corresponding LED indicator flashes. This indicates the keyboard is in pairing mode.
3. On your computer or device, go to Bluetooth settings.
4. Search for available devices and select "Jelly Comb K46B-2" (or similar model name) from the list.
5. Once paired, the LED indicator for the selected channel will turn solid, indicating a successful connection.

You can repeat this process to connect to two additional devices using channels 2 and 3.

Software Settings

The keyboard may support optional software for advanced customization. This software can typically be used to:

• Customize key assignments.
• Adjust keyboard layout settings.
• Update keyboard firmware for performance improvements.

Refer to the software interface for specific options and instructions.

Specifications

Note: Specific details for battery life, dimensions, and weight would typically be found in a full manual.

Initial Setup

1. Locate the power switch on the keyboard and turn it ON.
2. Ensure your computer or device has Bluetooth enabled.

Pairing Your First Device

1. Press and hold the 'Fn' key and the '1' key simultaneously for 3 seconds. The LED indicator for channel 1 will begin flashing blue.
2. On your computer/device, navigate to Bluetooth settings and select "Jelly Comb K46B-2" to pair.
3. Once connected, the LED indicator will turn solid blue.

Switching Between Devices

To switch to a previously paired device:

• Press 'Fn' + '2' to connect to the second paired device.
• Press 'Fn' + '3' to connect to the third paired device.

The corresponding channel LED will light up solid blue upon successful connection.

System Compatibility

This keyboard is compatible with major operating systems:

• Windows
• macOS
• Android
• iOS

Package Contents

Your package should include:

• Jelly Comb K46B-2 Keyboard
• USB Charging Cable
• User Manual

Keyboard Not Responding

• Check Power: Ensure the power switch is in the ON position.
• Check Battery: If the battery is low, connect the USB charging cable to recharge. The red indicator light usually signifies low battery or charging.
• Re-pair Bluetooth: Turn off and on the keyboard, then re-attempt Bluetooth pairing.

Cannot Connect to Device

• Enable Bluetooth: Verify that Bluetooth is enabled on your computer or mobile device.
• Device Range: Ensure the keyboard is within the effective Bluetooth range (typically up to 10 meters / 33 feet).
• Try Different Channel: If you have multiple devices paired, try switching to a different channel (Fn+1, Fn+2, Fn+3) to see if connection is established.
• Clear Pairing: On your device, remove/forget the keyboard from the Bluetooth list and try pairing again.

Keys Not Working Correctly

• Check Layout: Ensure the correct keyboard layout is selected in your operating system's settings.
• Restart Device: Sometimes, restarting the connected computer or device can resolve key mapping issues.
• Check for Interference: Other wireless devices operating on similar frequencies might cause interference. Try moving the keyboard closer to the device or away from other wireless transmitters.

Understanding Indicator Lights