Yealink AX86R Quick Start Guide

Package Contents

The Yealink AX86R package includes the following items:

• AX86R Handset
• Charging Cradle
• Power Adapter (5V/2A)
• Battery Cover
• Rechargeable Battery
• Belt Clip
• Quick Start Guide

TIP: Yealink recommends using provided or approved accessories. Unapproved third-party accessories may reduce performance.

Assemble AX86R

Step 1: Insert the battery into the handset.

The handset is assembled by inserting the battery and then closing the battery cover.

Step 2: Attach the belt clip to the handset.

Choose the appropriate mounting method based on your belt clip:

Method 1:

The belt clip attaches to the back of the handset, allowing it to be clipped onto a belt.

Method 2:

This method involves a separate clip that attaches to the handset, which then clips onto a belt.

Step 3: (Optional) Mount the charging cradle to the wall.

The charging cradle can be mounted to a wall using screws, with a recommended spacing of 39.5mm.

Charging

Option 1: Connect the charging cradle and charge the handset.

Place the handset into the charging cradle, which is connected to a power source via the power adapter.

Option 2: Connect the type-C cable to the charging port on the bottom of the AX86R.

Plug the other end of the type-C cable into a power source. A type-C cable is required but not included.

TIP:

• Use the Yealink-supplied power adapter (5 V/2 A). A third-party power adapter may damage the handset.
• Check the charging status on the top-right corner of the LCD screen.

Hardware Introduction

Power LED Indicator

Icons Description

The following table contains the description of the icon that might be displayed on the screen of the AX86R:

Connect to Wi-Fi

1. On the startup wizard, select your language and press OK or Next.
2. Do one of the following:
   • Option A: Quick Wi-Fi Connect
     a. Use your mobile phone to connect to the temporary access point created by the AX Series.
     b. On the Wi-Fi Configuration page, enter the Wi-Fi SSID and password for the network you wish to connect to. (If the page doesn't open automatically, open your web browser and enter 192.168.144.1 in the address bar.)
   • Option B: Available Networks
     a. Select the Wi-Fi network from the available options and press OK.
     b. Enter the password and press Save.