mailto:info@avipas.com
HOME | AViPAS Inc.HOME | AViPAS Inc.
User Guide for AVIPAS models including: AV-POE4, 4-Port Unmanaged PoE- PoE Switch Compatible, PoE- PoE Switch Compatible, 4-Port Unmanaged Switch, Switch, AV-POE4
USER MANUALS | AViPAS Inc.
File Info : application/pdf, 6 Pages, 135.99KB
DocumentDocumentModel: AV-POE4 4-port PoE Switch User Guide V1.0 Please read this user guide thoroughly before using. www.avipas.com Preface Thank you for choosing AViPAS PoE Switch AV-POE4. This guide introduces the functions, installation process and operation of AV-POE4. Prior to installation and usage, please read the guide thoroughly. Precautions To reduce the risk of fire, electric shock, or damage to the product, when installing, operating, and maintaining the equipment, follow the safety precautions described in the guide. "Warnings" and "notes" in this guide do not represent all safety precautions that should be followed. When using this equipment, the user must read through all the relevant precautions and special safety instructions provided in this guide and on www.avipas.com. The "safety warnings" listed in the guide only reflect of some the requirements. AViPAS will not bear any responsibilities for the loss caused by violation of general safety operation requirements. Installation environment requirements This device needs to be installed on desktop, or to be wall-mounted, or 19''rack-mounted. Temperature and humidity of the installation site must be kept within the working range. Please refer to the data sheet for the normal working temperature range and relative humidity range of PoE devices. Grounding is essential for the installation process. Correct wiring of the grounding cable protects the PoE device from lightning, high-voltage surge, interference, and static electricity. Lightning protection requirements Do not use outdoor overhead (open) wiring. The equipment may be damaged by lightning. Please use buried or steel pipe wiring. The fiber media converter must be grounded before being powered on to ensure that the grounding resistance of the installation environment does not exceed 10, otherwise the equipment may be damaged. Product Specifications DC Input: DC 52V 1.25A Port Max: 30W, Total: 65W PoE Output: IEEE 802.3af/at 4x PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports (unmanaged) 1x Gigabit Non-PoE Port for high-speed connections Product installation Installation instructions Please select a suitable installation location or cabinet according to the safety recommendation. When installing the PoE device, the user needs to choose matching mounting accessories. Please wear protective gloves when installing. Do NOT install the PoE device with its power on. Installation tools Labor protection gloves Plum screwdriver Flat screwdriver Installation steps Desktop installation Step 1: Place the PoE device on an even desktop. Make sure that at least 10cm of space is reserved on both sides of the PoE device (the vents), shown in Picture 1, so that the PoE device can be well ventilated. Connect the devices PoE Switch connection diagram Caution: Before installing or removing the PoE switch, power must be disconnected. Operating the PoE switch with its power on is prohibited to prevent injury or damage to the device. Make sure that the protective ground wire of each device is securely grounded. All power cables must NOT have any open parts exposed in the air. Checklist after installation All mounting parts (hanging ears and screws) are secured. Polarity of all cable connections is correct. Wiring between each two devices is correct and secured. Make sure there is no short circuit. Power on and see if the self-check process is performed normally. Indicator lights on the PoE device are in the correct working mode. Indicator lights and button/switch function table Symbol PWR Function Work indicator PoE PoE Link Network State On Off On Blink Off On Blink Off Description Normal Switch has no power supply or initialization failure Normal PD device failure or power overload No connected PD or switch has no power Link is established and ready to use Link port is receiving/sending data Link failure or port failure Color Green Green Yellow Function switches E: default OFF. Can support 100m power supply and communication; when dial E is set to ON, the switch can support 10M/250m long-distance power supply and communication, however, 4 PoE ports are isolated from each other. There will be no communication between PoE ports. D: default OFF. After communication between ports is interrupted, the connection won't be reestablished automatically. The user needs to manually enter IP addresses to connect devices again; when dial D is set to ON, communication can be resumed automatically once the interrupted connection is reestablished. P: default ON. PoE power indicator light will light up in different colors. Power consumption25% (green block), 25%<P50% (yellow block), 50%<P75% (orange block), P>75% (red block); Port 1 has the top priority regarding the power output. Warranty Thank you for your interest in the products of AVIPAS Inc. This Limited Warranty applies to PoE devices purchased from AVIPAS Inc. This Limited Warranty covers any defect in material and workmanship under normal use within the Warranty Period. AVIPAS Inc. will repair or replace the qualified products at no charge. AVIPAS Inc. provides a two (2)-year warranty (from the date of purchase) for PoE devices. This Limited Warranty does not cover problems including but not limited to: improper handling, malfunction or damage not resulting from defects in material. To receive warranty service, please contact AVIPAS Inc. first. We will decide whether a repair or replacement is needed and will advise you of the cost of such repair or replacement. Copyright Notice All contents of this manual, whose copyright belongs to our corporation cannot be cloned, copied or translated without the permission of the company. Product specifications and information which were referred to in this document are for reference only. We may alter the content at any time and without prior notice. Contact Details: AViPAS Inc. Address: 1700 Wyatt Drive, Suite #3 Santa Clara, CA 95054 Phone: 1-844-228-4727 Fax: (408) 228-8438 Email: info@avipas.com Website: http://www.avipas.com VER: 2021-9-27 (EN)