Miele Range Hood Installation Guide

Models: DAS 2620, DAS 2920, DAS 4720, DAS 4920, DAS 4930

Accessory Models: DKFS 31-900 P, DKFS 31-R, DUU 151, DUU 150

Important Safety Information

⚠️To prevent accidents and appliance damage, read the Operating and Installation Instructions before installation or use.

⚠️CAUTION: During the installation process, please be careful of sharp edges that can cause harm.

This section includes safety warnings in English, French, and Spanish.

Installation Steps

Step 1: Modes and Preparation

Identify installation modes:

? AE - Air extraction mode
? RM - Recirculation mode

Diagram shows two modes: "AE - Air extraction mode" and "RM - Recirculation mode".

Step 2: Model Identification and Dimensions

This guide covers Miele range hood models DAS 2620, DAS 2920, DAS 4720, DAS 4920, and DAS 4930.

Key dimensions are provided:

30" (762 mm)
35 7/16" (900 mm)
23 5/8" (600 mm)

Measurements K, G, and T are indicated, with the relationship T = K - G.

Diagram illustrates the Miele range hood models with labeled dimensions in inches and millimeters. It shows measurements K, G, and T, and the formula T=K-G.

Step 3 & 4: Mounting Bracket Installation

Install the mounting bracket using four T20 screws (4 x 15 mm) for wall attachment (Step 3) or cabinet attachment (Step 4).

An optional depth stop can be used.

Diagrams show the installation of a mounting bracket onto a wall or cabinet using four T20 screws (4 x 15 mm). Step 4 also illustrates an optional depth stop.

Step 5, 6, 7 & 8: Hood Component Assembly

Prepare the Miele DKFS 31-900 P / DKFS 31-R components.

Assembly involves using specific screws: 8x T20 (M4x8.5) and 2x T20.

A "Click" mechanism is used for securing parts, indicated by a "Press" action.

Diagrams show the Miele DKFS 31-900 P / DKFS 31-R unit, detailing screws (4x T20, M4x8.5; 2x T20). Step 8 demonstrates a "Click" mechanism for attaching or securing parts, with a "Press" action indicated.

Step 9: Main Unit Installation

Attach the main hood unit using four T20 screws (4 x 12 mm) and four T20 screws (4 x 15 mm).

Diagram shows the main hood unit being assembled or attached to a cabinet using four T20 screws (4 x 12 mm) and four T20 screws (4 x 15 mm).

Step 10: Cabinet Attachment and Depth Stop

If the cabinet does not have a stable rear panel, the fastening bracket must be attached to the kitchen wall. Use suitable means of fastening.

The optional depth stop is also shown.

Diagram illustrates the optional depth stop and how it attaches. It also includes text advising to attach the fastening bracket to the kitchen wall if the cabinet lacks a stable rear panel, using suitable fastening means.

Step 11, 12, 13 & 14: Duct Connection

Connect the ducting for either AE (Air Extraction) or RM (Recirculation) mode.

The "Click" mechanism is used for duct attachment.

Specific screw types are noted: 4x T20, 4x 15 mm.

Diagrams show the duct connection for AE (Air Extraction) and RM (Recirculation) modes. Step 13 provides a close-up of the "Click" mechanism for duct attachment. Step 14 shows the duct being connected, with specific dimensions for screw types (4x T20, 4x 15 mm).

Step 15 & 16: Accessory Models

Refer to Miele DUU 151 and DUU 150 for specific accessory models, likely duct adapters or components.

Diagrams show the Miele DUU 151 and DUU 150 components, likely duct adapters or accessories.

Step 17: Final Connection

Complete the final connection of the ducting system.

Diagram shows the final connection of the ducting.

	Miele DAS Series Cooker Hood Installation Guide - DAS 2x20, DAS 4x20, DAS 4x30 Models Official installation manual for Miele DAS series cooker hoods, including models like DAS 2x20, DAS 2x20 EXTA, DAS 4x20, DAS 4x30, DAS 2620, DAS 2920, DAS 4620, DAS 4920, DAS 4630, DAS 4930, DKFS 31-P, DKFS 31-R, DUU 151, DUU 150. Features detailed diagrams, measurements, and assembly instructions for proper mounting and setup.
	Miele DAS Series Cooker Hood Installation Guide Comprehensive installation guide for Miele DAS series cooker hoods, detailing cabinet preparation, unit mounting, filter installation, and electrical connections for models DAS 2620, DAS 2920, DAS 4620 (C), DAS 4920 (C), DAS 4630, and DAS 4930.
	Miele DAS 4720 Built-in Ventilation Hood - Features and Specifications Detailed information on the Miele DAS 4720 built-in ventilation hood, including its classic stainless steel design, Con@ctivity features, LED lighting, efficient filtration, and technical specifications. Suitable for installation in narrow upper cabinets with EasySwitch controls.
	Miele DAS Series Ventilation Hood Installation Guide This guide provides installation instructions for Miele DAS 2620, DAS 2920, DAS 4720, DAS 4920, and DAS 4930 ventilation hoods. It details the steps for mounting, securing, and preparing the appliance for use, emphasizing safety precautions.
	Miele DAS 4940 Ventilation Hood Installation Guide Comprehensive installation instructions for the Miele DAS 4940 built-in ventilation hood, detailing safety precautions, step-by-step mounting, and accessory integration.
	EU Declaration of Conformity - Miele Rangehoods Official EU Declaration of Conformity for Miele rangehood models, confirming compliance with relevant Union harmonization legislation and European standards.
	Miele Cooker Hood Operating and Installation Instructions Comprehensive guide to safely operate, install, clean, and maintain Miele cooker hoods. Covers safety warnings, usage modes, Miele@home connectivity, installation procedures, and technical specifications for models like DAS 4640 and DAS 4940.
	Miele Rangehood Installation Guide: DAS 8630 & DAS 8930 Comprehensive installation guide for Miele rangehood models DAS 8630 and DAS 8930, covering before installation checks, installation materials, dimensions, safety distances, vapour shield adjustment, air extraction, vent flue, non-return flaps, condensed water management, silencer installation, and electrical connection.