Invia® Motion™ Quick Card

Important Information

⚠️ The Invia Motion Quick Card does not replace the Invia Motion instructions for use. For information concerning intended use, indications, contraindications, warnings and cautions please refer to the appropriate Invia Motion Clinician instructions for use and Invia Motion Patient instructions for use included with the Invia Motion pump or at www.medela.com/healthcare.

? Charge battery for the first time before starting the therapy (approximate charging time is 4 hours). Recharge battery throughout the length of the therapy. The expected battery time generally exceeds 10 hours.

Overview

Image of the Medela Invia Motion NPWT pump.

Clinician use only

Clinician and patient use

Information on the Display

Positioning and Wearing the Invia Motion NPWT Pump

Positioning:

• Upright: Image showing the pump held upright.
• Laying with display side up: Image showing the pump laying with the display facing upwards.
• Upside down: Image showing the pump held upside down.
• Laying with display side down: Image showing the pump laying with the display facing downwards.

Wearing:

• Shoulder strap: Image of the shoulder strap.
• Belt strap: Image of the belt strap.

If placed in an inappropriate position or when canister is full, "Canister full" notification will appear and Invia Motion canister/tubing set must be changed to continue the therapy.

Changing the Invia Motion Canister/Tubing Set

Acoustic signals are muted by pressing the ? button.

1. Wash hands and prepare clean paper towel or tissue.
2. Remove the Invia Motion NPWT pump from the carrying case. Switch the Invia Motion NPWT pump off by pressing and holding the button for 3 seconds. Press only once.
3. Position the clamp next to the quick-connector and close the clamp on the pump tubing and also close the clamp on the dressing tubing. [Clamp open] [Clamp closed]
4. Disconnect the Invia Motion NPWT pump tubing from the dressing tubing by pressing on the sides of the Quick-connector. Use a paper towel or tissue to cover the tip of the used tubing to protect against wound fluid leakage.
5. Detach the full canister/tubing set by rotating the canister to the left.
6. Wash hands.
7. Obtain and open a new Invia Motion canister/tubing set package. CAUTION: Do not use an Invia Motion canister/tubing set if the sterile packaging is damaged or has expired. Make sure the correct canister is used: Ref 087.4016. Contact your healthcare professional if the correct canister is not available.
8. Remove the canister/tubing set from the packaging and attach it to Invia Motion NPWT pump.
9. Connect the Invia Motion NPWT pump tubing to the dressing tubing. Push together until you hear a click.
10. Open the clamp on the dressing tubing. Also make sure the clamp on the pump is open.
11. Switch the Invia Motion NPWT pump on by pressing the button. Slide the Invia Motion NPWT pump into the carrying case.
12. Ask your clinician how to properly dispose of a used canister/tubing set.

Notifications and Troubleshooting

Acoustic Signal can be muted by pressing ❌.

Important Cautions

⚠️ CAUTION: U.S. Federal law restricts this device to sale by or on the order of a physician.

Medela, Invia and Invia Motion are registered trademarks of Medela Holding AG, Switzerland.

Contact Information

Medela AG

Lättichstrasse 4b
6341 Baar, Switzerland
www.medela.com

USA

Medela LLC
1101 Corporate Drive
McHenry, IL 60050
USA
Phone: +1 877 735 1626
Fax: +1 815 307 8942
info-healthcare@medela.com
www.medela-healthcare.us

United Kingdom

Medela UK Ltd.
Huntsman Drive
Northbank Industrial Park
Irlam, Manchester M44 5EG
United Kingdom
Phone: +44 161 776 0400
Fax: +44 161 776 0444
info@medela.co.uk
www.medela.co.uk

Canada

Medela Canada Inc.
4160 Sladeview Crescent, Unit #8
Mississauga, Ontario, L5L 0A1
Canada
Phone: +1 905 608 7272
Fax: +1 905 608 8720
info@medela.ca
www.medela.ca

International Sales

Medela AG
Lättichstrasse 4b
6341 Baar
Switzerland
Phone: +41 41 562 51 51
Fax: +41 41 562 51 00
ism@medela.ch
www.medela.com