Instruction Manual for VEVOR models including: LZ02, LZ02 Shelf Track, LZ02, Shelf Track, Track

司顺工业设计


File Info : application/pdf, 4 Pages, 745.46KB

PDF preview unavailable. Download the PDF instead.

SKU12-宁波美威-配件货架轨道-说明书-20250115 1737426350779
SHELF TRACK
MODEL:LZ02
Technical Support and E-Warranty Certificate www.vevor.com/support

SHELF TRACK

1

Model

2

Packing Quantity

3

Colour

4

Length of guide

LZ02 5 PCS Bright Silver 1536mm

Hardware Fitting

Screw (x 25)

Expansion sleeve(x25)

Aircraft expansion sleeve(x25)

This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us for not informing you again if there are any technology or software updates on our product.

Thank you very much for choosing this product. Shelf track is an installation accessory. Please select the appropriate shelf support to work with it before installation. Please read all of the instructions before using it. The information will help you achieve the best possible results.

Product Structure Dimension Figure
Fit shelf support
(Note:Shelf support is not included)

Installation introduction (Note: This product only includes shelf track; other accessories are to be provided by the customer.)

1. Use guide rail positioning to

2. Fasten the guide rail to the wall with screws.

punch holes in the wall.

(1) If the wall is a board, screw directly into the board. (2) If the wall is a brick wall, first knock the expansion sleeve into the wall hole, and then tighten the screw to the expansion sleeve
(3) If the wall is drywall, first screw the aircraft
expansion sleeve into the drywall, and then install the screw to the aircraft expansion sleeve.

wall
3. Repeat steps 1 and 2 to install the remaining shelf track and shelf support. (Note: All shelf tracks must be of the same height) 4. Install shelf support in an appropriate position as required. 5. Finally, place the board on the shelf support.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main. UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730



References

WPS 文字