Introduction to the Intel 9260D2WL Wireless Module
This report presents the results of a Specific Absorption Rate (SAR) evaluation for the Intel Corporation Model 9260D2WL wireless module. This module was tested as installed in the Dell Model P82G. The evaluation was conducted to ensure compliance with FCC Part 2, 1093, ET Docket 93-62, and Industry Canada's RSS102 Issue 5 and Safety Code 6 regulations. These regulations are in place to protect the public and workers from potential hazards associated with radio frequency (RF) emissions from portable devices.
The testing procedures followed established standards including ANSI C95.1, ANSI C95.3, IEEE Std.1528, and Industry Canada's Safety Code 6. The report details the various wireless technologies operating within the 9260D2WL module, including different WLAN bands (2.4 GHz, 5 GHz) and Bluetooth, along with their respective power level tolerances.
The evaluation was performed by RF Exposure Lab, an accredited testing facility, ensuring adherence to rigorous measurement protocols. The findings in this report are based on a single type test of the Intel Corporation Model 9260D2WL as installed in the specified Dell model.
About RF Exposure Lab
RF Exposure Lab is an independent testing laboratory specializing in RF exposure assessments. They are accredited and certified to perform compliance testing for wireless devices according to international standards. For more information on their services, please visit www.rfexposurelab.com.
