USER MANUAL

Product Feature

[ IP65 TV Strip Lights ] Light up every side of your TV. Super Bright RGB light strip for 50-70 inch TVs. Can be applied outdoors with an adapter (not included).

[ Remote Control ] 16 color changing with 4 modes: fade, flash, strobe, smooth. 10 brightness levels are dimmable. The included remote control allows you to set your favorite color, mode, and brightness. Provides DIY atmospheric lighting and is a perfect mood light to improve image clarity and relieve eye fatigue.

[ Various Applications ] Super bright RGB ribbon light can be applied for Television, Computer, Laptop background lighting, Under Bed, Entertainment Center, Room Decorations, Home Movie Theater, etc.

[ Secure & Easy Installation ] 5V USB powered, low heat, and safe to touch. Features self-adhesive back tape; simply install the RGB ribbon light by removing the back cover and sticking it onto the desired installation area.

[ Package Content ] Remote Control, RGB TV Backlight. No other accessories are needed. For any issues, please contact us for a solution.

Achieve Optimal Viewing Experience

Before: [Image description: A television screen displaying a scene.]

After: [Image description: The same television screen with subtle RGB LED strip lights around the edges, enhancing the viewing experience.]

Adds a subtle RGB LED Strip to your monitor, reducing eye fatigue and increasing perceived image clarity. Customize your monitor, TV, or furniture with colorful LED light strip colors to fit your mood. Vansky Multi Color RGB Bias Lighting is an ideal solution.

Fit your mood

Use the high-brightness, vibrant, and sharp LEDs to light up or create festive lights on your monitor, TV, or furniture. Choose from solid colors, strobes, or cycling colors to fit your mood. You can easily swap between colors and lighting modes using the in-line remote on the strip.

• 20 kinds of dynamic models
• 16 kinds of static colors
• 5 speed levels (dynamic mode)
• 5 brightness levels (static mode)

[DIY Switches] [Smart Plugs] [Smart Wall Switches] [Smart Lighting] [Smart Home Security]

USE FOR DIFFERENT TV SIZE

Choose the length that best fits your TV to maximize eye relief and viewing quality. You can trim your TV backlight every 2 inches for the perfect fit, every time.

[Diagram: Visual representation of TV sizes from 17" to 27" with corresponding LED strip lengths.]

SPECIFICATION

RGB LED STRIP-50cm

• Model: LN21LD03
• LED QTY: 15LEDs
• Material: FPCB
• IP Rating: IP65
• Input Voltage: DC 5V
• Luminous Flux: >300Lm/m
• Lifespan: >25000Hours
• Beam Angle: 140°
• Working Humidity: <95%
• Working Temperature: -15 °C~50 °C

Smart Controller

• Supply voltage: DC 5V
• Connecting Mode: Common anode
• Net weight: 60g
• Output: Three CMOS drain- open output
• Remote controller: Infrared, 24Keys
• Remote controller battery: 3V(CR2025)
• Max load current: 2A each color
• Material: ABS V0
• Dimension: LED Strip (500mmx10mmx2.2mm), Controller (48x13x5mm), Remote Controller (85x52x7mm)

[Diagram: Shows the connection between the Controller, USB power source, and RGB LED Strip. Includes dimensions: 100mm, 500mm, 10mm.]

Function of Remote controller

Adopt IR remote to control the LED controller, which has 24 buttons. The function of each button is as the table below:

[Diagram: Layout of the 24-key remote controller.]

Operating Instruction

1. Clean the surface: Ensure the mounting surface is clean and dry. [Image description: Hand cleaning a surface.]
2. Tear the backing tape: Peel off the protective backing from the adhesive tape on the LED strip. [Image description: Finger peeling off backing tape from an adhesive strip.]
3. Adhere it to the surface: Press the LED strip firmly onto the desired location. [Image description: LED strip being applied to the back of a TV.]
4. Power on: Connect the USB cable to a power source (e.g., TV USB port or wall adapter). [Image description: USB cable connected to a controller and a power source.]
5. Adjust the controller: Use the remote control to select colors, modes, and brightness. [Image description: Remote control being used to adjust settings.]

Attention

⚠️ Important Notes:

1. DO NOT cut the LED strip lights to make a 90-degree turn; instead, bend the strip. Only cut the LED light strip if it is too long for your TV.
2. Clean the dust to ensure the back of your TV is free from dust before installation to avoid the strip falling off.
3. TVs with a frosted back may not allow the adhesive to stick firmly.
4. For the USB port electric current: If a small part of the TV may not supply enough current (e.g., less than 1A), when inserted into the TV USB port, the strip might not turn on or may flash. In such cases, simply use a 5V 1A Universal USB Wall Charger to power the LED strip lights instead.
5. The LED Light Strip can be turned on/off simultaneously with the TV's power on/off, but there may be exceptions depending on different TV versions.

Contact Information

Importer:

Alza.cz a.s., Jankovcova 1522/53, 170 00 Praha 7, Czech Republic. Website: www.alza.cz

Manufacturer:

Guangzhou Linong Lighting Technology Co.,Ltd. Keying Rd, Guangzhou Sci-Tech Industry Park, Baiyun District, Guangzhou, China. Tel: +86-20-31238588. Email: info@lnled.com. Web: www.lnled.com

[CE] [FC] [RoHS]