Renogy RNG-100MB
Premium 100W Monocrystalline Solar Panel
Key Features
Sleek design and a durable frame, the Renogy Premium 100 Watt 12 Volt Monocrystalline Panel provides you with the highest efficiency per area and is the perfect item for off-grid applications.
- High module conversion efficiency
- Top ranked PTC rating
- Quick and inexpensive mounting
- 100% EL testing on all Renogy modules
- No hot spots guaranteed
Potential Uses
The Renogy 100 Watt Monocrystalline Panel can be used in various off-grid applications that include 12 and 24 volts arrays, water pumping systems, signaling systems, and other off-grid applications.
Warranties
- 25 Years Power Output Warranty
- 5 Years Material and Workmanship Warranty
Electrical Data
| Parameter | Value |
|---|---|
| Maximum Power at STC* | 100 W |
| Open Circuit Voltage (Voc) | 21.2 V |
| Short Circuit Voltage (Isc) | 6.10 A |
| Optimum Operating Voltage (Vmp) | 17.7 V |
| Optimum Operating Current (Imp) | 5.70 A |
| Module Efficiency | 18.1% |
| Maximum System Voltage | 600 VDC UL |
| Maximum Series Fuse Rating | 10 A |
Thermal Characteristics
| Parameter | Value |
|---|---|
| Operating Module Temperature | -40°F to 176°F |
| Nominal Operating Cell Temperature (NOCT) | 47±2°C |
| Temperature Coefficient of Pmax | 0.38%/°C |
| Temperature Coefficient of Voc | 0.28%/°C |
| Temperature Coefficient of Isc | 0.06%/°C |
Mechanical Data
| Parameter | Value |
|---|---|
| Solar Cell Type | Monocrystalline (4.92 x 4.92 in) |
| Number of Cells | 32 (4 x 8) |
| Dimensions | 40.9 x 21.0 x 1.4 in (1038 x 533 x 35 mm) |
| Weight | 15 lb (6.8 kg) |
| Front Glass | Tempered Glass 0.13 in (3.2 mm) |
| Frame | Black Electrophoresis Aluminum Alloy |
| Connectors | Solar Connectors |
| Fire Rating | Class C |
Junction Box
| Parameter | Value |
|---|---|
| IP Rating | IP 65 |
| Diode Type | 15SQ045 |
| Number of Diodes | 2 Diode(s) |
| Output Cables | 14 AWG (2.00 ft long) |
Solar Connectors
| Parameter | Value |
|---|---|
| Rated Current | 30A |
| Maximum Voltage | 1000VDC |
| Maximum AWG Size Range | 10 AWG |
| Temperature Range | -40°F to 194°F |
| IP Rating | IP 67 |
Certifications
- CE Mark
- ISO 9001 Registered
- SGS Certified
- Module Application: Class A
Module Diagram
The module diagram illustrates the physical layout and dimensions of the solar panel. Key dimensions include:
- Overall dimensions: 40.9 x 21.0 x 1.4 inches (1038 x 533 x 35 mm).
- Specific measurements are indicated for length (1038 mm / 40.9 in), width (533 mm / 21.0 in), and thickness (35 mm / 1.38 in).
- Grounding points are also indicated on the diagram.
IV-Curve
The IV-Curve section illustrates the performance characteristics of the RNG-100MB panel versus voltage under Standard Test Conditions (STC). The graph plots Current (A) and Power (W) against Voltage (V). Key performance points identified are Voc (Open Circuit Voltage), Isc (Short Circuit Current), Vmp (Optimum Operating Voltage), Imp (Optimum Operating Current), and Pmax (Maximum Power).
Contact Information
Renogy | www.renogy.com | support@renogy.com | 909-287-7111
5050 S. Archibald Ave, Ontario, CA 91762
Disclaimer
*All specifications and data described in this data sheet are tested under Standard Test Conditions (STC - Irradiance: 1000W/m², Temperature: 25°C, Air Mass: 1.5) and may deviate marginally from actual values. Renogy and any of its affiliates has reserved the right to make any modifications to the information on this data sheet without notice. It is our goal to supply our customers with the most recent information regarding our products. These data sheets can be found in the downloads section of our website, www.renogy.com
