ctrl4.co/techsupport
mailto:techsupport@snapone.comPolicies
tech.control4.comtech.control4.com/
Installation Guide for snap one models including: B-260-SWTCH-5X1, B-260-SWTCH-5X1 18Gbps HDMI 5x1 Switcher, 18Gbps HDMI 5x1 Switcher, HDMI 5x1 Switcher, Switcher
4 sept. 2023 — 1× Quick Start Guide QR card. Warning. The IR Remote supplied with this product contains a coin/button cell battery. Keep product and batteries away from ...12 pages
File Info : application/pdf, 12 Pages, 1.40MB
DocumentDocumentB-260-SWTCH-5X1 18Gbps HDMI 5x1 Switcher Install Guide Welcome to BinaryTM This product is engineered to provide years of exceptional reliability. We appreciate your business, and we stand committed to providing our customers with the highest degree of quality and service in the industry. This 18Gbps HDMI 5x1 Switcher is compatible with HDMI 2.0/ HDCP 2.2 and supports video resolutions up to 4K@60Hz 4:4:4 8bit. Pro Tip: -_Connect the HDMI switch to a surge protector to extend the life of the product. Features l HDMI 2.0 and HDCP 2.2 compliant l Supports video resolutions up to 4K2K@50/60Hz 4:4:4 l 18Gbps video bandwidth l Supports 3D and HDR format video 1 l Supported HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD l Has an auto/manual switching mode for the input source l Supports CEC control l Flexible control via front panel buttons, IR remote or RS-232 commands Package Contents l 1 × 18Gbps HDMI 5x1 Switcher l 1× IR remote l 1× 3pin-3.5mm phoenix connector (male) l 2× Mounting ears l 4× Machine screws (KM3*4) l 1× 12V/2A Locking power adapter l 1× Quick Start Guide QR card Warning The IR Remote supplied with this product contains a coin/button cell battery. Keep product and batteries away from children. Battery can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body. Seek immediate medical attention if it is suspected that a coin/button battery has been swallowed or placed inside any part of the body. 2 3 Operation and Functions Front Panel A. Power LED -- Glows blue when the switch is powered on B. IR window -- Receives IR signals from IR emitting devices C. Input LEDs -- Glows blue when the input number is selected D. Output LED -- Glows blue when the HDMI out port is connected to a display E. Selection button - Short press to cycle through the inputs. Hold the button for three seconds to enable/disable auto-switching mode for the input source. Rear Panel A. HDMI In ports -- Connect an HDMI cable from a source B. HDMI Out port -- Connect an HDMI cable to a display C. IR RCVR PWR switch -- OFF to connect to a control system | ON to connect to an IR Receiver D. IR EXT port -- IR input to connect to IR Receiver or to output of a control system 4 E. RS-232 serial port -- RS-232 input to connect to the output of a control system F. Thread-locking power connector -- Connect to the included 12V DC, 2A power supply. 5 Installation 1. Connect an HDMI cable from the source to the HDMI inputs of the switch. 2. Connect an HDMI cable from the display to the switch's HDMI out port. 3. Connect any IR receivers or control systems to the switch. 4. Connect the switch's power supply. The Power, Output, and selected Input LEDs should glow blue. 6 IR Control l Power -- Press to power the switch on or set it to standby mode l Prev -- Press to select the previous source l Next -- Press to select the next source l Input 1/2/3/4/5 -- Press the desired input number to select the connected source IR Receiver Cable Pinout 7 RS-232 Control The switcher can be controlled using RS-232 commands from a PC or control system. Use the included three-pin phoenix connector to connect the control device to the switcher. Communication Format l Baud rate: 9600 bps l Data bits: 8 bit l Parity: None l Stop bits: 1 bit l Flow control: None Function Version Commmand FW VERSION Paramter <CR> Description Get firmware version Power on Power Off SET POWER ON<CR> Power on OFF<CR> Power off Switch input SET SWITCH IN1<CR> IN2<CR> Switch to input 1 Switch to input 2 IN3<CR> IN4<CR> Switch to input 3 Switch to input 4 Return V1.01 POWER ON<CR> POWER OFF<CR> SWITCH IN1<CR> SWITCH IN2<CR> SWITCH IN3<CR> SWITCH 8 Function Set autoswitch Query autoswitch status Commmand SET AUTOSWITCH Paramter IN5<CR> NEXT<CR> PREV<CR> ON<CR> OFF<CR> Description Return IN4<CR> Switch to input 5 SWITCH IN5<CR> Switch to the next SWITCH input IN1<CR> Switch to the previous input SWITCH IN1<CR> Autoswitch is on AUTOSWITCH ON<CR> Autoswitch is off AUTOSWITCH OFF<CR> GET AUTOSWITCH <CR> Get autoswitch status ON/OFF Example: SET SWITCH IN1<CR> switches to input 1. Note: -__.You must use <CR> or <LF> to end a command. 9 Specifications Technical HDMI Compliance HDCP Compliance Video Bandwidth Video Resolution Color Space HDMI Audio Formats HDR Support ESD Protection Connection Input Output Control Mechanical Housing Color Dimensions (W × D × H) Weight HDMI 2.0 HDCP 2.2 594MHz/18Gbps 480i ~1080p50/60Hz, 4Kx2K@24/30Hz, 4K2K@60Hz RGB, YCbCr 4:4:4 / 4:2:2, YUV 4:2:0 LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD Yes Human-body model: ±8kV (air-gap discharge), ±4kV (contact discharge) 5× HDMI IN [Type A, 19-pin female] 1× HDMI OUT [Type A, 19-pin female] 1× RS-232 [3pin-3.5mm phoenix connector] 1× IR EXT [3.5mm stereo mini-jack] Metal enclosure Black 147mm (5.79") × 66.3mm (2.61") × 16mm (0.63") 246g (0.54 lbs.) 10 Technical Input: AC100~240V 50/60Hz Power Supply Output: DC 12V/2A (US/EU standard, CE/FCC/UL certified) Power Consumption 3.24W (Max) Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (non-condensing) 11 Technical Support For chat and telephone, visit ctrl4.co/techsupport · Email: TechSupport@SnapOne.com. Visit tech.control4.com for discussions, instructional videos, news, and more. Warranty and Legal Notices Find details of the product's Limited Warranty and other resources such as regulatory notices and patent and safety information, at snapone.com/legal or request a paper copy from Customer Service at 866.424.4489. 2023, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice. 230829 -A 12