JBL TUNE125BT Quick Start Guide

What's in the Box

The package typically includes the JBL TUNE125BT headphones and accessories for charging and fitting.

How to Wear

Instructions on how to properly wear the headphones for optimal comfort and sound quality are provided, with visual guides indicating different sizes (S, M, L) for ear tips.

Power On & Connect

To turn on the headphones, press and hold the power button for more than 2 seconds. The headphones will automatically enter pairing mode. To connect, select "JBL TUNE125BT" from your device's Bluetooth list.

Button Command

The headphones support voice assistants like Siri®, Google Assistant, and Bixby. A single press of the button can play/pause music or answer/end calls. A double press can activate the voice assistant. Pressing and holding the button for over 2 seconds can turn the headphones on/off or initiate pairing.

Multi-Point Connection

The JBL TUNE125BT can connect to a maximum of two devices simultaneously. To connect a second device, put the headphones into pairing mode again (press and hold the power button for over 2 seconds) and select "JBL TUNE125BT" on the second device. To switch music sources, pause music on the current device and play on the second device. Phone calls always take priority. If a device goes out of Bluetooth range or powers off, you may need to manually reconnect it. To disconnect multi-point, select "Forget This Device" on your Bluetooth devices.

Charging

Connect the headphones to a power source using the provided charging cable. Charging time is less than 2 hours. The LED indicator will show the charging status.

LED Behaviors

Power On/Off: Indicates the power status.
No Device Connected: Shows that no Bluetooth device is paired.
BT Connecting: Indicates the headphones are attempting to connect via Bluetooth.
BT Connected: Confirms a successful Bluetooth connection.
Low Battery: Alerts the user when the battery is low.
Charging: Shows the headphones are currently charging.
Fully Charged: Indicates the battery is fully charged.

Tech Spec

Model:	TUNE125BT
Driver Size:	8.6 mm / 0.34" Dynamic driver
Power supply:	5V - 1A
Weight:	18.3 g / 0.04 lbs
Headset battery type:	Lithium-ion battery (3.7 V / 130 mAh)
Charging time:	< 2 hrs
Music playtime with BT on:	up to 16 hrs
Frequency response:	20 Hz – 20 kHz
Impedance:	16 ohm
Sensitivity:	95 dB SPL @1kHz 1mW
Microphone sensitivity:	-29 dBV/Pa @1kHz
Bluetooth version:	5.0
Bluetooth profile version:	HFP 1.7, A2DP 1.3, AVRCP 1.6
Bluetooth transmitter frequency range:	2.4 GHz-2.4835 GHz
Bluetooth transmitted power:	< 6 dBm
Bluetooth transmitted modulation:	GFSK, π/4 DQPSK, 8DPSK
Maximum operation temperature:	45 °C

Regulatory Information

This product is homologated by Anatel, in accordance with the regulated procedures for conformity assessment of telecommunications products and meets the applicable technical requirements. For more information, consult the Anatel website – www.anatel.gov.br. This equipment does not have the right to protection against harmful interference and cannot cause interference in properly authorized systems.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Models: Tune 125BT, Headphones, Tune 125BT Headphones

File Info : application/pdf, 2 Pages, 916.64KB

✖

PDF jbl-tune-125bt-zwart

References

Direitos do Consumidor — Agência Nacional de Telecomunicações

GPL Ghostscript 9.27 Adobe InDesign 15.0 (Windows)

Related Documents

	JBL TUNE125BT Wireless In-Ear Headphones Quick Start Guide A quick start guide for the JBL TUNE125BT wireless in-ear headphones, covering setup, pairing, button commands, multi-point connection, and charging.
	JBL TUNE125BT Quick Start Guide A quick start guide for the JBL TUNE125BT wireless in-ear headphones, covering setup, pairing, multi-point connection, button commands, charging, and technical specifications.
	JBL TUNE125BT Quick Start Guide: Connect and Use Your Bluetooth Earphones Learn how to set up, connect, and use your JBL TUNE125BT Bluetooth earphones with this comprehensive quick start guide. Includes pairing, multi-point connection, charging, and technical specifications.
	JBL Junior 320BT Bluetooth Headphones Quick Start Guide A comprehensive quick start guide for JBL Junior 320BT wireless on-ear headphones, covering setup, controls, app features, charging, troubleshooting, and technical specifications.
	JBL Tune 520BT Quick Start Guide: Setup, Controls, and Specifications Get started with your JBL Tune 520BT wireless headphones. This guide covers setup, Bluetooth pairing, controls, app features, charging, and technical specifications.
	JBL Junior 320BT Quick Start Guide This guide provides essential information for setting up and using your JBL Junior 320BT wireless headphones, including unboxing, pairing, controls, app features, charging, and technical specifications.
	JBL Tune 520BT Wireless Headphones Quick Start Guide Get started with your JBL Tune 520BT wireless headphones. Learn how to power on, connect via Bluetooth, use multi-point connection, control playback, charge the device, and access advanced features through the JBL Headphones app. Includes technical specifications and LED behavior.
	JBL Tune 125TWS Quick Start Guide Get started with your JBL Tune 125TWS true wireless earbuds. This guide covers setup, pairing, controls, charging, and technical specifications for optimal use.