GODOX Photo Equipment Co.,Ltd.Declaration of Conformity-GODOX Photo Equipment Co.,Ltd.
Instruction Manual for Godox models including: Cube-C, Cube-C Wireless Microphone, Wireless Microphone, Microphone
1 day ago — Please read this manual carefully before using to make sure the correct operation and exert the optimum function. The maximum wireless transmission distance ...
Cube-C-Product-GODOX Photo Equipment Co.,Ltd.
File Info : application/pdf, 41 Pages, 3.26MB
DocumentDocument
Godox Audio Wechat Official Account
Overseas Official Accounts & Updates
2 0755-296093208062 0755-25723423 godox@godox. com
GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com
www.godox.com Made in China | 705-CUBEC2-01
Cube-C
Wireless Microphone
Instruction Manual
2.4GHz ,
300 10 / / UAC / /
01
, ( ) RAM , 50 CCC
Cube-C Kit2
Cube-S TX *2 Cube-C RX *1 *1 *2 USB Type-C *1 TRS TRS *1 USB-C USB-C ×1 *4 *2 *2 *1 *1 *1
02
Cube-C Combo Kit1
Cube-S TX *2 Cube-C RX *1 *1 Cube-SC RX *1 *2 USB Type-C *1 TRS TRS *1 *4 *2 *2 *1 *1 *1
Cube-C Combo Kit2
Cube-S TX *2 Cube-C RX *1 *1 Cube-SC RX *1 USB Type-C Lightning *1 *2 USB Type-C *1 TRS TRS *1 *4 *2 *2 *1 *1 *1
Cube-S TX
/ /
/
< >
2s /
----
5
03
<
>
----
----
<
> /
----
---- ---- ----
Cube-C RX
TX1 3.5mm
/ /
TX2
USB-C
/ + / / / -
04
/
< > 2s /
----
5
<
>
----
----
<
> /
----
USB-C
---- ---- TX1/TX2
05
---- ----
< <
> 2s / > 2s /
-6dB
<
> ----
<
> ----
<
> ----
3.5mmTRS /
<
> <
> 3S
< > ---- < > ---- < > ----
06
Cube-SC RX
Combo kit1/Kit2 Cube-SC RX
USB-C Cube-SC RX
/ TX1/TX2 USB-C
<
>
----
----
----
<
> /
----
---- TX1/TX2
07
USB-C
/
08
<
> ----
<
> ---- 10
3
09
3.5mm TRS TRS
USB-C
USB-C 3.5mm TRS GAC-IC9
10
USB-C USB-C GAC-IC15
Lightning
Lightning 3.5mm TRS GAC-IC10 11
USB-C Lightning GAC-IC16
Cube-SL/SC RX
USB-C Cube-SC RX
Lightning Cube-SL RX
Cube-SL/SC RX USB-A USB-C
Cube-SL RX
12
APP
Godox Mic APP APP
SPL
Cube-S TX
Cube-C RX
Cube-C Charging Case01
20Hz-20KHz 115dB 70dB
5V 90mA
2.4GHz
/ / / / 300 5V 200mA
/
/ / / / / 5V 1.2A
3.87V, 97mAh, 0.376Wh 10 1.5
24.5x24.8x12.5mm 7g
3.8V,200mAh, 0.76Wh
3.8V,2300mAh, 8.74Wh
10 ( ) 1 +2
1 20
3
-10~50
0 ~45
46×29×18mm 16g
82×40×39mm 103g
13
Cube-SC RX 2.4GHz 300 9V 2A(Max.) -10~50 40.0mmx26.3mmx9.0mm 5g
14
(Pb) (Cd) (Hg) (Cr6+) (PBB) (PBDE)
×
*
SJ/T11364 * , GB/T 26572 × GB/T26572 ×
10
15
Foreword
Thank you for purchasing! Godox is proud to introduce a new wireless microphone system. With the characteristics of compact and portable, plug and play, 2.4GHz wireless transmission, as well as compatibility with various smartphones and cameras, it's quite suitable for live streaming, interview, short video recording, outdoor shooting, etc. Please read this manual carefully before using to make sure the correct operation and exert the optimum function.
Main Features
· The maximum wireless transmission distance up to 300m (sight distance).
· Clear and stable sound quality with denoise function · Compact and portable, plug and play. · Built-in lithium battery in transmitter provides 10 hours of working time. · Switchable mono, stereo and safety track modes in receiver. · Receiver supports computer UAC function, use and charge at the same
time. · Compatible with various smartphones and cameras.
16
Warning
This product is high-precision instrument, please avoid falling, collision or pounding. Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center. The product contains strong magnetism, please keep it away from magnetic cards, implantable medical devices (such as pacemakers), hard disks, RAM chips and other devices that are susceptible to interference. Do not store the battery for a long period of time after it has been completely discharged to avoid over-discharging the battery and rendering it unusable. Always keep this product dry. Do not use in rain or damp conditions. Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty. Do not leave or store the product if the ambient temperature reads over 50 . Keep out of reach of children. Do not use in flammable and explosive environments. Pay attention to the relevant warning signs. Please read carefully and follow the warnings or instructions provided by the manufacturer. Consumers who use a power adapter for charging should purchase a CCC-certified power adapter that meets the requirements of the standard.
17
Kit Name Cube-C Kit2
Item List
Transmitter Cube-S TX *2 Receiver Cube-C RX *1 Charging Case *1 Furry Windscreen *2 USB Type-C Charging Cable *1 TRS-TRS Connecting Cable *1 USB-C to USB-C Adapter Cable *1 Magnet *4 Magnetic Clip *2 Portable Rope *2 Cartoon Stickers *1 Storage Bag *1 Instruction Manual *1
Cube-C Combo Kit1
Transmitter Cube-S TX *2 Receiver Cube-C RX *1 Charging Case *1 Receiver Cube-SC RX *1 Furry Windscreen *2 USB Type-C Charging Cable *1 TRS-TRS Connecting Cable *1 Magnet *4 Magnetic Clip *2 Portable Rope *2 Cartoon Stickers *1 Storage Bag *1 Instruction Manual *1
Cube-C Combo Kit2
Transmitter Cube-S TX *2 Receiver Cube-C RX *1 Charging Case *1 Receiver Cube-SC RX *1 USB Type-C to Lightning Adapter Cable*1 Furry Windscreen *2 USB Type-C Charging Cable *1 TRS-TRS Connecting Cable *1 Magnet*4 Magnetic Clip *2 Portable Rope *2 Cartoon Stickers *1 Storage Bag *1 Instruction Manual *1
18
Using Instructions
Transmitter Cube-S TX
Built-in Microphone
Indicator
Power Switch/Denoise/ Pairing Button
Power Switch
The transmitter will automatically turn on after taking out of the charging case, and turn off after putting into the charging case. Long press the power switch button < > for 2s to turn on or off the transmitter.
Flash green ---- Unpaired after powered on
Note: The transmitter will be turned off if it stays unpaired in 5min after powered on.
Pairing
Quickly short press twice the pairing button <
> to pair it with the receiver.
Flash green rapidly ---- Pairing status
Constant on green ---- Paired with denoise off
Denoise
Short press the denoise button <
> to turn on or off the denoise function.
Constant on orange ---- Denoise function is on
19
Charging The transmitter can be charged after putting into the charging case.
Flash red ---- Low battery level Breathe blue ---- Charging Constant on blue ---- Fully charged
Receiver Cube-C RX
TX1 Indicator 3.5mm Audio Output Port Power Switch/Pairing/ Denoise Button
TX2 Indicator
USB-C Port
Safety/ Volume + Button Volume/ Safety/Mode Indicator Mode/Volume - Button
Power Switch
Long press the power switch button < > for 2s to turn on or off the receiver.
Flash green ---- Unpaired after powered on
Note: The receiver will be turned off if it stays unpaired in 5min after powered on.
20
Pairing
Quickly short press twice the pairing button < transmitter.
> to pair it with the
Flash green rapidly ---- Pairing status
Constant on green ---- Paired with denoise off
Denoise
Short press the denoise button < function.
> to turn on or off the denoise
Constant on orange ---- Denoise function is on
Charging
The receiver can be charged after connecting to power source through the USB-C charging cable or putting into the attached charging case.
Constant on red ---- Battery level of receiver is low Flash red ---- Battery level of TX1 or TX2 transmitter is low Breathe blue ---- Charging Constant on blue ---- Fully Charged
21
Mode Switch
Long press the mode/volume button < mono track mode. Long press the safety/volume + button < safety mode.
> for 2s can switch to stereo / > for 2s can turn on or off the
Note: The safety mode is mono track by default, and the right channel will record the audio with -6dB gain.
< > Constant on green ---- Mono mode < > Constant on blue ---- Stereo mode < > Breathe green ---- Safety mode
Note: The stereo and safety modes are only available when connecting the receiver with a camera by 3.5mm TRS cable.
Output Volume Adjustment
Short press the safety/volume + button <
> or mode/volume button
<
> to enter volume adjustment status, then short press the volume +
button or volume button in 3s can adjust the output volume in 3 levels.
< > One indicator is on ---- Lowest volume level < > Two indicators are on ---- Medium volume level < > Three indicators are on ---- Highest volume level
Receiver Cube-SC RX
Note: Cube-SC RX is only included in Combo kit1 and Combo Kit2.
22
USB-C Plug (Cube-SC RX)
Lightning Plug (Cube-SL RX)
Pairing/Denoise Button TX1/TX2 Indicator USB-C Port
Pairing
Quickly short press twice the pairing button < transmitter.
> to pair it with the
Flash green rapidly ---- Pairing status
Flash green ---- Unpaired
Constant on green ---- Paired with denoise off
Denoise
Short press the denoise button <
> to turn on or off the denoise function.
Constant on orange ---- Denoise function is on
Battery Level Flash red ---- Battery level of TX1 or TX2 transmitter is low
23
Charging Case
USB-C Port
Reset Button Battery Level Indicator
Charge the Transmitter and Receiver
Insert the transmitter and receiver into the charging case in the correct direction can charge them. Indicators on the transmitter and receiver flash blue means that they are being charged, constant on blue means that they are fully charged.
Note: Remove the sticker on the bottom of the transmitter/receiver for first time use.
24
Charge the Case Itself
The charging case can be charged by connecting to the power adapter, the indicators on it will flash incrementally
<
> Flash white ---- Charging
<
> Constant on white ---- Fully charged, then turn off in 10min
Note: Recharge every 3 months or so to keep the battery alive. Sitting idle for a long time may affect its performance or even cause permanent damage to the battery.
Transmitter Installation
25
Mount the Receiver onto Cameras
3.5mm TRS-TRS audio cable
Mount the Receiver onto Smartphones
Smartphones with USB-C port
USB-C to 3.5mm TRS adapter cable (GAC-IC9) 26
USB-C to USB-C data cable (GAC-IC15)
Smartphones with Lightning port
Lightning to 3.5mm TRS adapter cable (GAC-IC10) 27
USB-C to Lightning data cable (GAC-IC16)
Mount the Receiver Cube-SL RX and Cube-SC RX onto Smartphones
USB-C Plug (Cube-SC RX)
Lightning Plug (Cube-SL RX)
Connect the receivers Cube-SL RX and Cube-SC RX to power source with USB-A to USB-C cable and insert into smartphones, then they can charge the smartphone and be used at the same time.
Note: Cube-SL RX is sold separately.
28
APP Downloading
Scan the QR code to download the Godox Mic app, it can control the use of this product after connection.
Technical Data
Name Model
Transmission Type
Pickup Pattern Frequency Max. SPL SNR Max. Wireless Distance Input Parameters Lithium Battery Parameters Working Time
Charging Time
Transmitter Cube-S TX
Receiver Cube-C RX
2.4GHz Frequency Hopping System
Omnidirectional
/
20Hz-20KHz
/
115dB
/
70dB
/
300m (sight distance)
5V 90mA 3.87V, 97mAh, 0.376Wh Approx. 10h
Approx. 1.5h
5V 200mA
3.8V,200mAh, 0.76Wh
Approx. 10h (with denoise off)
Approx. 1h 20min
29
Charging Case Cube-C Charging Case01 /
/ / / / /
5V 1.2A 3.8V,2300mAh, 8.74Wh Charge three devices for about three times Approx. 3h
Working Environment
Charging Temperature
Dimension
Net Weight
0.96"x0.98"x0.49" 7g
-10~50 0 ~45 1.81"×1.14"×0.71" 16g
3.23"×1.57"×1.54" 103g
Name
Receiver
Model
Cube-SC RX
Transmission Type
2.4GHz Frequency Hopping System
Max. Wireless Distance 300m (sight distance)
Input Parameters
9V 2A (Max.)
Working Environment -10~50 Temperature
Dimension
1.57"x 1.04"x0.35"
Net Weight
5g
Specifications and data may subject to changes without notice.
30
Warning
Operating Frequency: 2402MHz - 2480MHz Cube-S TX Maximum EIRP Power:-4.25dBm Cube-SC RX Maximum EIRP Power:4.05 dBm Cube-C RX Maximum EIRP Power: 5dBm
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity The device complies with RF specifi cations when the device used at 0mm from your body
Marking Information
Model: Cube-C RX
R-R-gdx-016
Made in China
Li-ion Battery:3.8V , 200mAh,0.76Wh FCC ID: 2ABYN132
Input: 5 V 200mA(Max.)
IC: 20034-132
CAN ICES-003(B)/NMB-003(B)
219-247155
31
Model: Cube-S TX
R-R-gdx-018
Made in China
Li-ion Battery: 3.87V, 97mAh, 0.376Wh FCC ID: 2ABYN120
Input: 5V 90mA
IC:20034-120
CAN ICES-003(B)/NMB-003(B)
210-234905
Model: Cube-SC RX
R-R-gdx-018
Input: 9V 2A (Max.) Output: 9V 2A (Max.) CAN ICES-003(B)/NMB-003(B)
Made in China FCC ID: 2ABYN123 IC : 20034-123
210-234911
32
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifi cations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
33
( ) ( )
34
:
35
12
3
12
0755-29609320-8062
36
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information
Customer Information
Model Name Address
Product Code Number Contact Number
Seller Information
Name Contact Number Address
Note
Date of Sale
Note: This form shall be sealed by the seller.
Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.
37
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage
38
or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Name Type
Product Main Body
Parts Battery
Electrical parts e.g.battery charger, etc.
Other Items
Power Cable, Sync Cable, Battery Case, Windscreen Foam, Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc.
Maintenance Period(month) 12
3
12
No
Warranty Service Type
Customer sends the product to designated site
Customer sends the product to designated site
Customer sends the product to designated site
Without warranty
Godox After-sale Service Call 0755-29609320-8062
39