Test Report
Report Details
Report No.: AiTSZ-250709012RRev1
Dated: 2025-07-24
Applicant
CRISOL TECHNOLOGY CO., LTD.
Address: 9th Floor, Building 5, Futong Haizhi Science and Technology Park, Nanwan Street, Longgang District, Shenzhen City, Guangdong Province
Manufacturer
Zhejiang Zhongguang Environmental Equipment Co., Ltd
Address: 3F, Workshop 1, No.109, Qibaiyang Street, Nanmingshan Street, Liandu District, Lishui City, Zhejiang Province
Testing Laboratory
Guangdong Asia Hongke Test Technology Co., Ltd.
Address: B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China
Website: https://www.aitek.org.cn
Email: info@aitek.org.cn
Phone: +86. 0755-23096763
Sample Information
Sample Name: RV Water purifier
Model No.: GFRVRO01
Serial Model No.: GFRVRO01-G, GFRVRO01-H
Sample Received Date: 2025-07-09
Test Period: 2025-07-09 to 2025-07-15
Test Overview
Test Requested: Refer to the following page(s)
Test Method: Refer to the following page(s)
Test Result: Refer to following page(s)
Prepared by: Oliver (Project Handler)
Reviewed by: Lizhen (Designated Reviewer)
Component List
| No. | Name |
|---|---|
| 1 | Filter element base screw |
| 2 | Check valve spring |
| 3 | Water bottle check valve spring |
| 4 | Kettle |
| 5 | Water bottle sealing ring |
| 6 | Transparent sealing ring |
| 7 | Filter element water sealing ring |
| 8 | Turntable water-sealing O-ring |
| 9 | Large sealing ring of the turntable |
| 10 | PE pipe |
| 11 | The upper shell of the kettle seat |
| 12 | The lower cover of the kettle seat |
| 13 | Upper cover of the filter element |
| 14 | Lower cover of the filter element |
| 15 | Filter bottle |
| 16 | Filter bottle end cap |
| 17 | 2 points directly converted to 2 points |
| 18 | 2 points for a bend and 2 points for a straight insert |
| 19 | Elbow (with socket) |
| 20 | 2 minutes, 1 conversion, 2-3 passes |
| 21 | 2 points 3 ways (right Angle) |
| 22 | Kettle check valve |
| 23 | Filter element seat |
| 24 | Filter element seat turntable |
| 25 | Filter element seat fixing plate |
| 26 | Filter element one-way valve cover |
| 27 | Filter element one-way valve stem |
| 28 | A 2-point plug |
Test Results
FDA Compliance Testing
Extractable Lead and FDA GRAS Chromium Content
Test Method: With reference to ASTM C738-94(2016) for Extractable Lead; US EPA 3050B:1996; US EPA 6010D:2018 for FDA GRAS Chromium Content.
| Item | Test Condition | Unit | Result | Limit | ||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| Extractable Lead (Pb) | 4% acetic acid, 22°C, 24h | mg/L | <0.1 | <0.1 | <0.1 | Adult: 7 |
| Conclusion | / | / | Pass | Pass | Pass | / |
| Chromium(Cr) | GRAS/ICP-OES | % | 13 | 13 | 13 | ≥10.5 |
Notes: 1. % = percent by weight; 2. N.D. = Not detected (less than method detection limit); 3. Photo appendix is included.
FDA CFR 21 181.32 - Acrylonitrile Copolymers Requirement
Ref: FDA 21 CFR 181.32
| Test Item(s) | Test condition | Unit | Result | Limit |
|---|---|---|---|---|
| 4 | ||||
| Acrylonitrile in Distilled Water | 120°F, 24h | mg/in² | N.D. | 0.003 |
| Acrylonitrile in 3% Acetic Acid | 120°F, 24h | mg/in² | N.D. | 0.003 |
| Acrylonitrile in 8% Ethanol | 120°F, 24h | mg/in² | N.D. | 0.003 |
| Acrylonitrile in n-Heptane | 120°F, 24h | mg/in² | N.D. | 0.003 |
| Conclusion | -- | -- | Pass | -- |
Note: -N.D. = Not Detected or less than Detection limit; -This product material is ABS material
FDA 21 CFR 177.2600 - Rubber articles intended for repeated use.
Ref: FDA 21 CFR 177.2600
| Test Item(s) and condition | Unit | Result | Limit | ||||
|---|---|---|---|---|---|---|---|
| 5 | 6 | 7 | 8 | 9 | |||
| Total extractives in D.I. water reflux temperature for 7 hours | mg/in² | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 | 20 |
| Total extractives in D.I. water reflux temperature for succeeding 2 hours | mg/in² | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 | 1 |
| Total extractives in n-hexane reflux temperature for 7 hours | mg/in² | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 | 175 |
| Total extractives in n-hexane reflux temperature for succeeding 2 hours | mg/in² | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 | 4 |
| Conclusion | / | Pass | Pass | Pass | Pass | Pass | / |
FDA CFR 21 177.1520 - Polymer: Olefin Polymers Requirement
Ref: FDA 21 CFR 177.1520
| Test Item(s) | Test condition | Unit | Result | Limit |
|---|---|---|---|---|
| 10 | ||||
| Density | -- | g/cm³ | 0.927 | 0.85-1.00 |
| Maximum soluble fraction in n-hexane | 50°C 2h | W/W% | 1.5 | 5.5 |
| Maximum soluble fraction in xylene | 25°C 1h | W/W% | 2.5 | 11.3 |
| Conclusion | -- | -- | Pass | -- |
Note: -N.D. = Not Detected or less than Detection limit; -This product material is PE material
FDA CFR 21 177.1520 - Polymer: Olefin Polymers Requirement (Continued)
Ref: FDA 21 CFR 177.1520
| Test Item(s) | Test condition | Unit | Result | Limit | ||
|---|---|---|---|---|---|---|
| 11 | 12 | 13 | ||||
| Density | -- | g/cm³ | 0.892 | 0.892 | 0.892 | 0.880-0.913 |
| Melting point | -- | °C | 173 | 173 | 173 | 160-180 |
| Maximum soluble fraction in n-hexane | Reflux 2h | W/W% | 1.5 | 1.5 | 1.5 | 6.4 |
| Maximum soluble fraction in xylene | 25°C 1h | W/W% | 2.5 | 2.5 | 2.5 | 9.8 |
| Conclusion | -- | -- | Pass | Pass | Pass | -- |
FDA CFR 21 177.1520 - Polymer: Olefin Polymers Requirement (Continued)
Ref: FDA 21 CFR 177.1520
| Test Item(s) | Test condition | Unit | Result | Limit | ||
|---|---|---|---|---|---|---|
| 14 | 15 | 16 | ||||
| Density | -- | g/cm³ | 0.892 | 0.892 | 0.892 | 0.880-0.913 |
| Melting point | -- | °C | 173 | 173 | 173 | 160-180 |
| Maximum soluble fraction in n-hexane | Reflux 2h | W/W% | 1.5 | 1.5 | 1.5 | 6.4 |
| Maximum soluble fraction in xylene | 25°C 1h | W/W% | 2.5 | 2.5 | 2.5 | 9.8 |
| Conclusion | -- | -- | Pass | Pass | Pass | -- |
FDA CFR 21 177.1520 - Polymer: Olefin Polymers Requirement (Continued)
Ref: FDA 21 CFR 177.1520
| Test Item(s) | Test condition | Unit | Result | Limit | |
|---|---|---|---|---|---|
| 20 | 21 | ||||
| Density | -- | g/cm³ | 0.892 | 0.892 | 0.880-0.913 |
| Melting point | -- | °C | 173 | 173 | 160-180 |
| Maximum soluble fraction in n-hexane | Reflux 2h | W/W% | 1.5 | 1.5 | 6.4 |
| Maximum soluble fraction in xylene | 25°C 1h | W/W% | 2.5 | 2.5 | 9.8 |
| Conclusion | -- | -- | Pass | Pass | -- |
Note: -N.D. = Not Detected or less than Detection limit; -This product material is PP material
FDA CFR 21 177.2470 - Polyoxymethylene copolymer.
Ref: FDA 21 CFR 177.2470
| Items | Test Condition | Unit | MDL | Limits | Results |
|---|---|---|---|---|---|
| Water extractives | 120°F, 24h | mg/in² | 0.1 | 0.5 | 0.11 |
| 8% ethanol extractives | 120°F, 24h | mg/in² | 0.1 | 0.5 | 0.17 |
| N-heptane extractives | 70°F, 30min | mg/in² | 0.1 | 0.5 | 0.21 |
| Extractives in distilled water | Reflux temperature, 6h | % | 0.1 | 0.2 | N.D. |
| Extractives in n-heptane | Reflux temperature, 6h | % | 0.1 | 0.15 | 0.12 |
Note: -N.D. = Not Detected or less than Detection limit
Supersede: This test report is used to replace the test report numbered AiTSZ-250709012R. The original paper report and electronic version report of AiTSZ-250709012R are invalid accordingly.
Sample Photos
The following images show the RV Water purifier and its components:
- Image 1: Displays the main unit of the RV Water purifier, a clear plastic container, a filter element, and hoses (blue and yellow).
- Image 2: Shows a similar view of the RV Water purifier setup, including the main unit, a clear plastic container, a filter element, and hoses. The branding "glacier fresh" is visible on a protective bag in this image.
This technical report may only be quoted in full. Any use for advertising purposes must be granted in writing. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production.