Lynx LSB1 Professional Built-In Propane Gas Single Side Burner Installation Guide

Mount the switch assembly in the desired location using the included #6-32 x 1 screws.
Connect the 4-pin receptacle on the switch assembly to the 4-pin plug on the accessory.

Connect the 4-pin plug on the power supply to the 4-pin receptacle on the accessory.
Ensure that the mounting location is close enough to the accessory for the connection.

Mount the power supply bracket to the inside of the counter using appropriate screws based on the counter material.
Plug the power supply into a wall socket.

Connector Identification:

4-pin PLUG: Identify and connect this to the corresponding receptacle on the accessory.

4-pin RECEPTACLE: Identify and connect this to the corresponding plug on the accessory.

Introduction

These instructions detail the electrical connections for Lynx Accessories to an independent power source for the following products:

LSB1 Single Side Burner
LSB2 Double Side Burner

LSB2PC Double Side Burner with Prep Center
LPB Power Burner

LSBGE Grill Extender
LSA30 Classic 30” Cabinet

LSA36 Classic 36” Cabinet
LSA42 Classic 42” Cabinet

LPA36 Classic 36” Pantry
LTA30 Classic 30” Trash Drawer Combo Unit

LTA30-4 Ventana 30” Trash Drawer Combo Unit
LSA30-4 Ventana 30” Cabinet

LSA36-4 Ventana 36” Cabinet
LSA42-4 Ventana 42” Cabinet

LPA36-4 Ventana 36” Pantry

Lynx Accessory Switch Kit:
Model LASK The Lynx Accessory Switch Kit is designed to power a Lynx accessory burner or storage accessory directly without a connection to a grill. The kit contains a power supply as well as a switch assembly with a mounting plate.

Installation Instructions

Mount switch assembly in desired location using included #6-32 x 1” screws.
Connect the 4-pin receptacle on the switch assembly to the 4-pin plug on the accessory.
Attach power supply to mounting bracket using included #6-32 x ½” screws and #6-32 locknuts.
Connect the 4-pin plug on the power supply to the 4-pin receptacle on the accessory.
After assuring that the mounting location is close enough to the accessory for the two to connect, mount the power supply bracket to the inside of the counter. Screws used for mounting will depend on counter material.
Plug the power supply into a wall socket.

Precautions while working on electrical connections:

Read and understand the instruction manuals provided with both the grill and the accessory being installed. Review these instructions in their entirety before beginning.
TURN OFF ALL GAS AT ITS SOURCE to the appliances BEFORE beginning any electrical work. When working on an island installation, open any doors or drawers and allow the space to ventilate before beginning any work. Unplug the transformer/power supply from its receptacle under the island.

ABOUT COMPANY

Lynx Grills, Inc.
62201 HWY 82 West Greenwood, MS 38930
Phone (888)289-5969
www.lynxgrills.com

FAQ (Frequently Asked Questions)

What products are compatible with the Lynx Accessory Switch Kit (LASK)?
The LASK is designed for Lynx accessory burners or storage accessories such as LSB1, LSB2, LSB2PC, LPB, LSBGE, LSA30, LSA36, LSA42, LPA36, LTA30, and more listed in the user manual.
How do I mount the switch assembly?
Use the included #6-32 x 1 screws to mount the switch assembly in your desired location.
What is included in the Lynx Accessory Switch Kit?
The kit contains a power supply, a switch assembly with a mounting plate, and necessary connectors for installation.

Documents / Resources

Lynx LSB1 Professional Built-In Propane Gas Single Side Burner [pdf] Installation Guide
LSB1, LSB2, LSB2PC, LPB, LSBGE, LSA30, LSA36, LSA42, LPA36, LTA30, LTA30-4, LSA30-4, LSA36-4, LSA42-4, LPA36-4, LSB1 Professional Built-In Propane Gas Single Side Burner, LSB1, Professional Built-In Propane Gas Single Side Burner, Built-In Propane Gas Single Side Burner, Gas Single Side Burner, Side Burner, Burner

References

User Manual

Lynx LSB1 Professional Built-In Propane Gas Single Side Burner

Product Information

Product Usage Instructions